5F08K323325 NIR

Belmont_old · August 20, 2010 at 3:44 AM

Offered at$21,500 by seller oldtimeclassics.com

Quote

1964 Mustang K Code Convertible
Tony Gregory there were only 26 1964.5 K-code convertibles made and a total of 98 1964.5 K-codes with no fastbacks produced only coupes and convertibles.((((( 1 of 26 Made )))))
1964 Mustang Convertible K code 289 HIPO....
This car was in the same family since 1968 until 2011 when I bought the car. The Above picture was taken in 1972 at a local car show.
The car is an original Wimbledon White over black interior K code 4 speed car.The owner did not like the white so in 1970 he painted the blue & added a red interior. Also when he did that he changed the transmission to an automatic so the whole family could drive the car.
Original Door tag matching the Vin stamp on drivers fender apron.This is a very very rare car.
This car should be restored but you can drive it well you work on it.
$21,500

Display More

http://www.oldtimeclassics.com/cardetail_32_htm.htm

davmcn_old · August 20, 2010 at 7:53 PM

Incorrect distributor and in one of the pictures the harmonic balancer looks awfully thin.

CharlesTurner · August 21, 2010 at 12:16 AM

Interesting array of pictures. That thing must be scary to drive without a sway bar up front.

C6ZZKGT · August 21, 2010 at 2:03 AM Official Post

This Kar has an eight inch rear end and 1966 style motor mounts.

-Fred-

6hypo5conv_old · August 21, 2010 at 5:27 AM

RECOMMENDED TEMPLATE: Sold for final sale price by seller

BuyItNow set at bin price(also post BIN if there is one for comparison)

Quote

description here

link

I don't like the looks of the data plate or the non-original rivits.

I don't think the car has anything near the original engine, trans or rear end for that matter-its going to be a very challenging restoration to say the least! (who the heck would paint a car Blue and add a Red interior??)

RalphJr · August 21, 2010 at 9:49 AM

Nothing appears to be original K anymore - except the VIN number.

Lots of hidden rust too if you look close.

It does have the HiPo axle plate - one good thing, but thats about the only thing.

CSXEng_old · August 22, 2010 at 12:22 AM

Also has 1966 gauges. brake line cut and moved to the single exhaust location. date is two days after mine.

Dave V.

gjz30075 · August 22, 2010 at 6:24 AM

It's funny that even in the earlier pics, there's no hipo emblem on the fender. It's like this car never was.

Kman_old · August 23, 2010 at 2:14 PM

The build date of Oct 15th 1964 is a bit late for a 64 1/2 is it not??

C6ZZKGT · April 13, 2011 at 9:38 AM Official Post

This Kar is back on Ebay again:

http://cgi.ebay.com/ebaymotors/For…5fCarsQ5fTrucks

It is interesting that the auction mentions "sway bar for K code" but it is not there. It also appears to me that the areas for the exhaust hangers on the rear floor pan have been sectioned in.

-Fred-

CharlesTurner · April 13, 2011 at 10:18 AM

What makes you think the reinforcements look welded in? All I see is oil from a pinion leak built up around the area and the seams showing. It looks like a legit hi-po to me, but of course, someone needs to do a careful inspection.

5F08K323325 NIR

Participate now!

Users Viewing This Thread