Used C3OZ 6250 C Camshaft

Quote from C6ZZKGT

Here is an Ebay auction for a used C3OZ 6250 C Hipo camshaft by Ebay member "acond classic american_auto_parts" with a Buy-It-Now of $289.00:

This is a good used original Ford camshaft which is correct for all 1963 through 1967 Ford 289 HIPO engines. It has normal wear from used but no trashed lobes. Was running fine when removed. Look at the photos to see if it will suit your needs. All original Ford and correct in every detail. No repro import crap here.

65 66 67 MUSTANG & SHELBY HIPO 289 ORIGINAL FORD CAMSHAFT C3OZ 6250 C GOOD USED | eBay

-Fred-

This used C3OZ 6250 C Hipo camshaft sold April 18 2025 on Ebay for $289.00.

-Fred-

Here is a used C3OZ 6250 C Hipo camshaft for sale by Ebay seller "jollyroge" with a starting bid of $0.99:

Original Ford 289 Hi-Po K code Shelby GT350 Mustang camshaft C3OZ-6250-C. Here is an original used 289 Hi-Po solid lifter camshaft that was removed from a Shelby GT350.The Ford part number for this cam is C3OZ-6250-C. It has the upside down AE marking on the cam to designate that it is a factory Ford 289 Hi-Po cam. This is a solid lifter or mechanical camshaft with a valve lash of. 019 , .460 lift and 310degree of advertised duration. It was put away many years ago carefully by the 2nd owner of the car and was protected with a storage oil. This cam would be proper is any 289 Hi-Po powered car from 1963-1967 including Shelby , Cobra , Mustang ,Falcon, Comet, and Fairlane . There has been much cam failure in the last few years because of poor quality control with new cams. This is an original 1960’s cam when they were made well. This cam has been obsolete from Ford for many years and would be an excellent cam for your classic 1960’s small block Ford. This cam will work in 260-289-an 302 engines. Winner pays fed Ex ground to the lower 48 states . Good luck bidding!

Original Ford 289 Hi-Po K code Shelby GT350 Mustang camshaft C3OZ-6250-C | eBay

-Fred-

Quote from C6ZZKGT

Here is a used C3OZ 6250 C Hipo camshaft for sale by Ebay seller "jollyroge" with a starting bid of $0.99:

Original Ford 289 Hi-Po K code Shelby GT350 Mustang camshaft C3OZ-6250-C. Here is an original used 289 Hi-Po solid lifter camshaft that was removed from a Shelby GT350.The Ford part number for this cam is C3OZ-6250-C. It has the upside down AE marking on the cam to designate that it is a factory Ford 289 Hi-Po cam. This is a solid lifter or mechanical camshaft with a valve lash of. 019 , .460 lift and 310degree of advertised duration. It was put away many years ago carefully by the 2nd owner of the car and was protected with a storage oil. This cam would be proper is any 289 Hi-Po powered car from 1963-1967 including Shelby , Cobra , Mustang ,Falcon, Comet, and Fairlane . There has been much cam failure in the last few years because of poor quality control with new cams. This is an original 1960’s cam when they were made well. This cam has been obsolete from Ford for many years and would be an excellent cam for your classic 1960’s small block Ford. This cam will work in 260-289-an 302 engines. Winner pays fed Ex ground to the lower 48 states . Good luck bidding!

Original Ford 289 Hi-Po K code Shelby GT350 Mustang camshaft C3OZ-6250-C | eBay

-Fred-

This used C3OZ 6250 C Hipo camshaft sold September 20, 2025 on Ebay for $713.99 with 31 bids from 17 bidders.

-Fred-

Here is an Ebay auction for a used reproduction C3OZ 6250 C Hipo camshaft by Ebay member "Vintage Engine Works" with a Buy-It-Now of $750.00 or make offer:

Reproduction 289 K Code camshaft. This is old, likely from the 1980's. This was a new camshaft that was improperly stored and had gotten rusty. I acquired these from the estate of a Shelby/Mustang collector. Camshaft was sent to Delta Camshaft to be inspected, checked for straightness, and re-parkerized. It is new and ready to install and run.

Ford 289 K Code GT NOS Mustang Fairlane Cam Camshaft C3OZ-6250-C Repoduction | eBay

-Fred-