Posts by Math

This set seems to be the good one for my project: forged, 4cc head volume, clip, 5.155 rods length, strock 2.87.
https://www.summitracing.com/parts/dms-1-3500-4030d#overview

8cc head volume is too much to obtain the 10,5:1compression value. Or as you say, heads and block need to be machined and you have to choose a super thin head gasket.

Here an other way with 2.70 cc head volume. https://www.summitracing.com/parts/slp-l2482f30

I ´m agree with you.

Thanks for your messages.

According with Gemini AI, An untouched block is 8.206’’.

and what about the gasket?

Unfortunately my block was surfaced .0035’’. So now it is 8.2025
To have a 0.00 deck, in my configuration, I need 1.6125 CH pistons.

Are you running 5.155 or 5.090 rods?

Same question for rods. What is the best way to replace C3AE 3/8?

Are they recently machined? Ready to install ?

Is it possible to know the toploader date range with the HEH-T tag?

And what about toploader? My Kar was sheduled January 6, 1965. This is a HEH-T but the date is impossible to read. What was the range for the transmission?

A friend of mine is rebuilding her engine and he ´s looking for HP heads.

Do they have this number 19,20 or 21?

This new registry is a great idea. Each owner must provide informations and documents about their Kar to be included in the registry.

How much to regrind a cam currently?

Do you have a good address in the east coast.

Ok thanks for the feedback.

Can not wait for several months.

That one seems to be a good compromise if it is made in US and not in Asia:

https://www.cjponyparts.com/comp-cams-camshaft-set-nostalgia-plus-n-plus-271s-solid-mechanical-flat-tappet-2200-6800-rpm-289-302/p/316714-V/

Is the best way to rebuilt my engine buy a repop with the same caracteristics?

Like this one: https://www.compcams.com/factory-muscle…rd-221-302.html

Hi Fred, what do you think about this camshaft? Good to rebuilt my engine?

Thanks

Hi, you mean that you have a 65 HiPo fuel pump.

I have a 66 HiPo fuel pump to trade for a 65.

Are they good for a 1964 December kcode engine ?

I don’t see the piston oiler?

The GT package was introduced in April 1965, while disc brakes were available and could already be ordered as early as 1964.

I would like to trade my 4201 fuel pump, October 1965 for a 3939S December 1964/january 1965.

I will add money for the deal.

Colorado?