Hi , can anyone please point me in the direction of Pictures showing the Exhaust Trumpets Exiting the Rear Valence panel on a 65 , or at least any Measuremants of how far they stick out.
Many thanks , Shane
Hi , can anyone please point me in the direction of Pictures showing the Exhaust Trumpets Exiting the Rear Valence panel on a 65 , or at least any Measuremants of how far they stick out.
Many thanks , Shane
The only dimension I find in the shop manual is the dimension between the trumpet and the opening trim "This dimension must be concentric within +/- 3/16 inch"
Not too many originals to use as a guide and any of the press photos/dealer brochures have to be taken with a grain of salt.
I think this pic shows the tips pretty close as they were originally:
I have an original FOMOCO dual exhaust and FOMOCO trumpets on my Acode and they stick out 1 3/8" on the top and 4 1/2" on the bottom measuring from the trim ring to the end of the trumpets. Hope this helps.
http://www.ncrmc.org/photopost/data…_Mustang_3a.jpg
Mike
Edited by - Mike C. on 04/17/2010 14:48:54
Thanks for that Link Charles , will use that as a Reference .
Shane
Hi Mike , thanks for your Pic with Measurements , this is a great site .
Shane
this is from the skrapbook, pic was taken when the TSB replacement system for the Arvinode was still on the kar. Skroll down to the grey fastback.
Thanks for the Link bill , have viewed the link .
Thanks , Shane
Don’t have an account yet? Register yourself now and be a part of our community!