Thanks for your Comment , Excuse this dumb Question , how do i find this VMF site too read up on Comments etc.
Thanks , Shane
Thanks for your Comment , Excuse this dumb Question , how do i find this VMF site too read up on Comments etc.
Thanks , Shane
Im hoping too hear some other Views on this as well as it seems too be a Big Problem .
Shane
Hi , thats very reassuring that you have mentioned PS Auto Glass as Carlite refer Classic Glass Enquiries too PS Auto Glass.
I have already had bad experience with New Glass Not Correct Shape , problems with Door Glasses not the correct shape , same problem with Rear Glass .
I Know there are many Companies in the U.S. that are Etching the Carlite Loggo's on Glass.
Thanks again for your Input.
Shane
Hello members. I would like to know opinions about the best source to buy new glass for my K Kar. I have experienced many problems with replacement glass that does not fit properly.
Thanks, Shane
Edited by - SixT5HiPo on 06/16/2011 00:38:49
Thanks Bryan for the Links .I notice the Outer Belt holes on this Convertible are in a different location to a 66 fastback.On a 66 fastback the Outer holes are on the Inside of the rear inner Quarter panel between the wheelhouse and the quarter panel.
I can only assume that the outer belt comes under the Quarter panel .
Shane
can any one put up some pics of rear lap belt positioning on 65/66, in particular where the belt exits under the inner rear quarter panel . Also i imagine the Buckle is positioned on the same side as the Fronts!!!
I am putting rear laps in my 65
Thanks , Shane
Hi guys , thanks for all the feedbacks , i Too had mine rechromed by Advanced plating , But in New Zealand , i have been fortunate that most of the Chrome pts on my 65 have very few pitting , so all the rechroming has come up nice .I Agree Those Repro Scott Drake sliders do look real nice .
Shane
Thanks Ron for your input , have done letters Black .
Shane
Thanks for the pic Dave , so i Guess all black then for the letters
Thanks for your input.
Shane
happy New Year too all , am in process of reassembling rear interior quarter vents , my Question is , the SLIDER open/closed , ARE the OPEN/CLOSED words supposed too be coloured RED for CLOSED & GREEN for OPEN .
I have just had the sliders rechromed and noticed that the letters had traces of Red and Green before i had them stripped.
Look forward too hearing dome feedback.
Shane
Brant,i have viewed your Blog on these new scot drake panels , tell me How do the scot drake panels Compare up with the Canadian Made panels around the area where the WINDLACE comes down the Pllar and Kick Panel sits over it. There is NO way the Canadian panels are going too slip over the Windlace , these panels are thick.
Appreciate your feedback .
Shane
Sure would like too see some White Kick Panels .
Sure would like too Compare these New Scot Drake panels too the USA made ( Canadian Mustang ) panels i brought quite sometime back from NPD , i was told that these are the finest on the Market .
Shane
Very Interesting , thanks for the Pic , the bag is real Interesting mind you !!
Shane
Thanks Guys for your feedback .
Shane
I am about too fit my Rear outer Quarter Vent panels to fastback , thought it would be a good idea too place a bead of sealer around the Housing before positioning in Panel , DOES this vent normally get fitted with Sealer !!!
Appreciate some feed back thanks , Shane
Thanks guys , as mentioned in First email , the Original 4x screw holes are on the Seat Riser Panels , Where do the Other 4x Screws go that come in the Screw Kit !!!
Shane
Hi everyone , i am about too install my New Carpet Set,65 Fastback , Can anyone Provide any Pics Showing Carpet Screw Hole locations.
I Brought a 8 Pc Screw kit , i Know the position of the 4 Screws under the front seats where the Front & Rear Carpets over lap each other , Dont Know where the others should be fastened.
My Kar has Console.
Thanks , Shane
Thanks for the Pics Bob , mine had been fitted in wrong location.
Shane
Can anyone provide any pics showing Correct Postion for fuel line Clamp on Waterpump Housing for 65 K , should the Clamp have a Insulating Grommet in the clamp where it supports the Line .
Thanks Shane
Thanks Brant , i will get in Contact .
Shane