Brake Proportioning Valve

MBrown_old · April 1, 2007 at 10:13 AM

`65 FB, 271hp/289, GT, 4spd, with factory manual front disc brakes.

Prop valve shows signs of a very old seeping leak and owner says rear drum brakes don't seem to work as well as they should. Of course I wasn't told this until I had the car all apart.....

I'm replacing the master cyl. (yet to find one) and all the brake lines. I have a mas/cyl on order and hope it's the correct one when it comes in tomorrow.

Can any of you give me a lead on finding a correct, new/rebuilt prop valve for this car? TIA

snow517_old · April 1, 2007 at 10:23 AM

I would try the K.A.R. web site. They might have one. If not, if you call and ask for Kevin Roberts he would probably know where to get one.

Steve

MBrown_old · April 1, 2007 at 10:38 AM

Can you please post a link to the K.A.R. site? Thanks

Mark

zray · April 1, 2007 at 11:06 AM

Quote from MBrown

`65 FB, 271hp/289, GT, 4spd, with factory manual front disc brakes.

Prop valve shows signs of a very old seeping leak and owner says rear drum brakes don't seem to work as well as they should. Of course I wasn't told this until I had the car all apart.....

I'm replacing the master cyl. (yet to find one) and all the brake lines. I have a mas/cyl on order and hope it's the correct one when it comes in tomorrow.

Can any of you give me a lead on finding a correct, new/rebuilt prop valve for this car? TIA

Display More

I would try Jim Cowles @ http://www.shelbyparts.com/index.html first. He has restored a couple of the prop valves for me and although it takes a while, his workmanship is first class.

Z. Ray

'66 GT-350

MBrown_old · April 1, 2007 at 11:46 AM

I know Jim and have delt with him a number of times. Great guy and I'll give him a call tomorrow.

ThanKs

Mark

gasman4571 · April 2, 2007 at 9:18 AM

Or you could just buy one of my NOS prop valves! Kevin

MBrown_old · April 2, 2007 at 11:32 AM

How much do you get for a NOS one?

Mark

MBrown_old · April 2, 2007 at 11:34 AM

You can email me at abadtb2@tfb.com if you'd like.

Thanks

Are you the Kevin Roberts with a white 70 BOSS 302?

round2K_old · April 3, 2007 at 6:03 AM

There is a good bit of info available on Randy Meyers' site. There is a fellow named Mark Frappier who does the stainless sleeving. If you send him your valve he will sleeve it for you. He did a great job on mine.

http://www.stangerssite.com/

MBrown_old · April 3, 2007 at 9:03 AM

Thanks Dave, nice to know.

Mark

Participate now!