Motor Mount Stud Part Number Question

RPM_old · February 1, 2009 at 8:19 AM

Anybody know what the part number is for the 65 Mustang Hipo motor mount stud that holds the parts together?

cobraboy · February 1, 2009 at 10:34 AM

Try 379891-S

RPM_old · February 1, 2009 at 1:31 PM

Are there no letters etc.in front of that number and do you have part number for the bottom steel piece with the frame stud in it?...Thanks

cobraboy · February 1, 2009 at 5:09 PM

There is another number in brackets listed for that bolt it is

[BB-838-K]

The plates with the frame stud are made of two parts welded together

The upper part number is C3OZ-6046-A same for L and R

The lower left hand is C5ZZ-6029-A

The lower right hand is C5ZZ-6028-A

RPM_old · February 1, 2009 at 5:19 PM

Wow,that bottom piece didn't come from Ford with both pieces welded together under one part number?

cobraboy · February 1, 2009 at 6:09 PM

you will need a much better qualified person than me to answer that one

jwc66k · February 1, 2009 at 10:56 PM

Quote from RPM

Wow,that bottom piece didn't come from Ford with both pieces welded together under one part number?

The upper assembly dropped straight down into the lower (frame)bracket. It therefore could not be one piece. All the part numbers are listed in the Hi-Po registry except the hardware items:

- special bolt - 379891-S2 (2 ea);

- washer to lower bracket - 353472-S8 (2 ea);

- nut to lower bracket - 34421-S8 (2 ea);

- bolt to frame - 372993-S8 (6 ea);

- nut to frame - 377704-S8 (6 ea, although others were authorized).

All the items are available at AMK.

Jim

Participate now!