Used "FoMoCo" Dual Point Distributor

    SOLD for $178.01

    Quote

    You are bidding on an original Mustang HIPO and Shelby dual point distributor for a 289 High performance . This fits 1965 1966 1967 and may work in many other years of Ford products inc. Fairlane Falcon Comet Cougar and Ford Truck .

    http://cgi.ebay.com/ebaymotors/ws/…2405145957&rd=1


    [Blocked Image: http://hipomustang.com/hpmx/images/prices/dist030103-1.jpg]


    [Blocked Image: http://hipomustang.com/hpmx/images/prices/dist030103-2.jpg]

    Here's another one SOLD for $159.50


    Quote:


    Item Description:


    This is a nice original hipo 289 dual point distributor part number C5OF 12127 for mustang's and shelby's.The shaft spins free with no side movement in the bushings.However it will need new points and condenser. Shipping will be $12.00 with insurance added. I accept money order,casher check, or PAY PAL.


    The date code on this distributor is 5LC.


    http://cgi.ebay.com/ebaymotors/ws/…item=2406574278

    I bought the one at the top after a number of emails with the seller. The thing is like brand new. Its not date correct for my car, but is visually correct. Its ready to drop in, but I will keep my eyes open for a date specific one.


    Brad

    This one SOLD for $150.00.


    DESCRIPTION:


    This auction is for a 1965 Ford Mustang 289 HiPo Dual Point Distributor – FoMoCo part number of C5OF 1217E. Shaft numbers - C50F-12131-B. Got this part with a large group of parts that have been sitting in a warehouse for years.


    [Blocked Image: http://www.hipomustang.com/cgi-bin/cars/d…tor120903-1.jpg]


    [Blocked Image: http://www.hipomustang.com/cgi-bin/cars/d…tor120903-2.jpg]


    http://cgi.ebay.com/ebaymotors/ws/…gory=33690&rd=1

    This FoMoCo stamped distributor SOLD for $225.00.


    DESCRIPTION:


    Here we have a Fomoco Dual Point Distributor for a 289 High Performance engine, commonly used in Mustangs, Fairlanes, and Cyclones. This distributor is free of excessive wear, and the lobes are still crisp to snap both sets of points open as originally designed. No excessive play in the shaft, this unit has no visible signs of gouges or repairs, and can be used as is, but would certainly be a beautiful candidate for a classic restoration.


    This unit, stamped with FoMoCo, has a factory part number of C50F-12127-E, and is dated 4G8 (shown in last photo). Standard distributors were equipped with a vacuum advance pod on the side, unlike these high performance units, which offered no vacuum advance. This unit has not been modified to disguise a removed vacuum unit. This is NOT a Motorcraft replacement - it's a gennie!


    http://cgi.aol.ebay.com/ebaymotors/ws/…gory=10076&rd=1

    Here's another used FoMoCo distributor that SOLD for $256.95.


    DESCRIPTION:


    This factory 289 HIPO distributor is in fine shape. No damage, cracks or broken pieces. Points and condensors intact. Shaft is tight and dist. gear looks good. Distributor is missing the lead wire but the wise restorer will do a Pertronix conversion anyway. Distributor is a FOMOCO unit with part # of C7OF. Date code is 7G2B. Excellent original item for the 289 HiPo Mustang/Shelby GT 350.

    This used FoMoCo dual point distributor SOLD for an amazing $355.00.


    DESCRIPTION:


    This is a used Ford (FoMoCo)HIPO 289 dual point distributor used in Mustangs, Cobras, and GT-350's. It's in good condition and spins freely. It has the following part numbers which you can also see in the pictures. On the top the stamped number is C50F 12127 E. Right below the 12127 there is a 5AA stamped in. On the distributor shaft housing there is a casting number of C50F-12131-B

    Quote

    I just wanted to double check that I am reading the date code correctly on this distributor - January of 65?


    That's the correct date code...although it looks a little rough, and is described as having play in the bushing, maybe you can buy it cheap enough so that the cost of refurbishing it won't bring the total cost too high.

    Here goes another used FoMoCo dual point distributor that Sold for $242.50.


    DESCRIPTION:


    You are looking at an original Ford dual point distributor part number C5OF-12127-E with a casting date of 5E3 (the 3 could possibly be an 8|, this unit has the FoMoCo cast into it. This unit could be used on a Mustang with the 'K' engine, Cobra or Shelby with the 289 HiPo, 271 and 306 HP engines. This distributor is in excellent condition and is ready for install.


    eBay link

    Edited once, last by SixT5HiPo (May 12, 2005 at 12:08 AM).

    This used dual point distributor is stamped FoMoCo, and SOLD for only $137.50.


    DESCRIPTION:


    ONE USED IN VERY GOOD CONDITION 1968 FORD K-CODE 289 HIPO DUAL POINT DISTRIBUTOR. MECHANICAL ADVANCE ONLY (NO VACUUM). REBUILT 11K AGO, TIGHT SHAFT, NEW POINTS/CONDENSER/CAP/ROTOR. ALL INTERNAL SCREWS CHANGED TO SOCKET HEAD CAP SCREWS. PRIMARY WIRE NOT ORIGINAL. FOMOCO CASTING # C5OF-12127-E (SHAFT HOUSING SAYS C5OF-12131-8) DATE CODE 8A17. READY TO INSTALL AND SET DWELL.


    [Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…tor032304-1.jpg]


    eBay link

    Edited once, last by SixT5HiPo (May 12, 2005 at 12:09 AM).

    This used FoMoCo dual point distributor is date coded "6H10", and SOLD for $255.00.


    DESCRIPTION:


    1966 289 HiPo Distributor marked "FoMoCo"

    Body Casting Code C50F-12131-B


    Manufacture code C50F-12127-E


    Date Code 6H10


    This is the FOMOCO Casting Ford distributor for the 1966 HiPo 289, not the Autolite which was implemented in 1967 production year as well as the service part replacements up to September 1971. If you are looking for a true restoration piece this is the one you need, not the Motocraft or the Autolite.


    eBay link

    Edited once, last by SixT5HiPo (May 26, 2005 at 8:56 PM).

    This used FoMoCo dual point distributor SOLD for $153.19.


    DESCRIPTION:


    This came in a car I bought. Dual point distributor; everything is there. Front wire is cut, shaft turns smoothly, gears are not chipped, spring brackets not bent. This might be from the HiPo 289 Shelby engine. Check your part numbers to be sure. Here are the # C5OF-12127-E 6G15 FoMoCo. Hard distributor to find. Thanks for looking.


    eBay link

    Edited once, last by SixT5HiPo (May 26, 2005 at 8:55 PM).

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login