I need a 1-1/2" fan spacer (with bolts a plus).
Can anyone out there help me out?
Thanks
Edited by - SixT5HiPo on 06/17/2009 21:20:23
I need a 1-1/2" fan spacer (with bolts a plus).
Can anyone out there help me out?
Thanks
Edited by - SixT5HiPo on 06/17/2009 21:20:23
Take a look on ebay - there are usually quite a few different ones for sale.
PM sent-I've got one sitting right here on my desk for you!
<BLOCKQUOTE id=quote><font size=1 face="Verdana" id=quote>quote:<hr height=1 noshade id=quote>
PM sent-I've got one sitting right here on my desk for you!
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana" size=2 id=quote>
You guys are the best.
I located one already - if it doesn't work out I'll get back in touch.
Thanks again.
6hypo5conv,
If the spacer you have on your desk is correct for a 65K, build june 2, 1965, I would love to buy it.
Can you tell me how much?
Thanks, Wally
Guys, (Charlees & Wally) The 1 1/2" spacer that I have acording to anouther post looking for 1 and a very rough (installed) measurement from the one on my engine is NOT correct for a HIPO, the correct one is something like 2.3 or 2.4" (look up the other post-there is no mention of the spacer in Tony'd book-just the fan itself)I just sold a lot of 5 spacers on ebay that some were LONGER than that and 1 was SHORTER, I wonder if the "HIPO" spacer is used on any other Ford application so we can check other resources?
Chose a fan spacer that provides a minimum of 1/2"- 1" prefered clearence between the fan blade and the radiator core.
<BLOCKQUOTE id=quote><font size=1 face="Verdana" id=quote>quote:<hr height=1 noshade id=quote>
Guys, (Charlees & Wally) The 1 1/2" spacer that I have acording to anouther post looking for 1 and a very rough (installed) measurement from the one on my engine is NOT correct for a HIPO, the correct one is something like 2.3 or 2.4" (look up the other post-there is no mention of the spacer in Tony'd book-just the fan itself)I just sold a lot of 5 spacers on ebay that some were LONGER than that and 1 was SHORTER, I wonder if the "HIPO" spacer is used on any other Ford application so we can check other resources?
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana" size=2 id=quote>
The correct 2.36 inch spacer I bought on ebay was being sold as a T-bird spacer. Don't recall for what year(s) or engine.
If you look on page 32 of the 4th edition of Tony's book it mentions the 1965/66 fan spaces as being 2.36 inches.
Sorry about that Rick, must have had my mind somewhere else!
Don’t have an account yet? Register yourself now and be a part of our community!