cleaning out garage

eight NOS Boss 302 rods in Ford boxes $800/set

used hipo 289/ boss 302 rods, floated $400/set

cast iron 4V intakes $100 ea.

C8 part #'d hipo balancers $250 ea.

motorcraft dual point distr. $250

hipo timing gear hatchets $100 ea.

1.08 4V Autolite 4100 non hipo carb dated 66, $70

driver's side hipo exhaust manifold $100

hipo std bore short block dated 5B(crank, rods and pistons installed) never disassembled $3500

hipo 289 heads, one dated 4C other 4D, machined and assembled $1200

hipo 289 heads dated 6M, thermactor, modified, machined and assembled $1200

Lots of Shelby stuff too. Paul

Edited by - paul on 05/07/2009 21:43:40

The 6M heads have been ported and polished. Bigger valves. The push rod slots were worn so giude plates were intalled. The cresent shaped steam passages in the bottom of the heads have been welded up too. All the above were done before I owned the heads. Paul.

Also, I forgot to list on initial posting the following:

NOS upper and lower FORD 65 mustang control arms @ $1000/ALL FOUR

NOS L $ R door hinge asy. C5ZZ-6522810-B & 6522811-B @ $200/PR

NOS L & R door wx strip C5ZZ-6520531-A & 6520530-A @ $250/PR

MSuHsEtLaBnYG, I do have an oil pan and Richard, I do still have the 1.08 carb. Paul @ 817-691-0159 or deemarvin@tx.rr.com .