Used FoMoCo Hipo Distributor

Quote from C6ZZKGT

This Ebay auction for a used FoMoCo Hipo distributor was ended by the seller December 18, 2019 with the following explanation "This listing was ended by the seller because the item is no longer available".

-Fred-

This used FoMoCo Hipo distributor that is "no longer available" is back on Ebay again with no changes:

https://www.ebay.com/itm/1639972847…=STRK:MEWAX:VRI

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "toobadmustsell" with a Buy-It-Now of $499.99:

ORIGINAL FACTORY FORD C5OF-12127-E FOMOCO DUAL POINT DISTRIBUTOR with DATE 8B27, FITS FORD SMALL BLOCK HIPO 289 and FACTORY REPLACE UNIT , FOR THE LATER BOSS 302 ENGINES , NICE USED CONDITION, AND HAS NOT BEEN MONKEY WITH ! I THINK THIS ONE WAS SOLD OVER THE COUNTER FOR THE BOSS 302 REPLACEMENT, AS THE DATE IS 1968 FEB 27,

https://www.ebay.com/itm/FORD-C5OF-…V0AAOSwMtdd1Ha5

-Fred-

This Ebay auction for a used FoMoCo Hipo distributor was ended by the seller December 18, 2019 with the following explanation "This listing was ended by the seller because the item is no longer available".

-Fred-

This used FoMoCo Hipo distributor that is "no longer available" is back on Ebay again with no changes:

https://www.ebay.com/itm/1639972847…=STRK:MEWAX:VRI

-Fred-

This Ebay auction for a used FoMoCo Hipo distributor was ended by the seller January 2, 2020 with the following explanation "This listing was ended by the seller because the item is no longer available".

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used early FoMoCo Hipo distributor by Ebay member "olddudescarparts" with a Buy-It-Now of $1,350.00:

This listing is for a 289 HIPO distributor Fits all Ford and Mercury with 260 289 302 engines Thanks for looking see our return policy for returns Check our ebay store for more great deals on NOS items and good used Ford parts PLEASE READ BEFORE BIDDING... NOS,or NEW OLD STOCK does not mean the part is mint or even perfect! We do not own or sell anything that is perfect. Ford Motor Company has always been in the business of building mass produced vehicles and parts, NOT show cars When we describe something as being NOS that means it is new and has never been installed on a car.Any obvious flaws are mentioned and most times even pictured in the description so there should be no surprises,CHECK OUR FEEDBACK.We try our best to accurately describe the parts we sell but we can and do make mistakes just like everyone else .IF YOU HAVE ANY DOUBTS about the condition or application of the item being sold then please ask questions before bidding. Thank you for reading this and for your understanding.

https://www.ebay.com/itm/1964-1-2-1…ZkAAOSw6Mldctrf

-Fred-

This used early FoMoCo Hipo distributor sold January 6, 2020 on Ebay for $1,350.00.

-Fred-

Here is an Ebay auction for a restored FoMoCo Hipo distributor by Ebay member "mysunshine302" with a starting bid of $750.00:

I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts too the up coming younger generations to use.
You are bidding on a professionally *totally restored *Original 289 HiPo FoMoCo housing (K) code dual point distributor. ***This is not a used service replacement Motorcraft or Autolite replacement housing HiPo dual point distributor. This is a 100% original FoMoCo housing HiPo dual point distributor. Distributor curb has been set up to original 1966 factory 289 HiPo spec. Ready to install and Rev!
Part number on original aluminum FoMoCo housing C50F-12127-E date code 8B27. Part number cast on lower aluminum housing C5OF-12131-B. Correct for the 289 HiPo (K) code engine in the Shelby GT350 & AC Cobra & Ford Mustang GT & Ford Fairlane GT & Ford Falcon Sprint & Mercury Comet & Mercury Cougar XR7 & Mercury Cyclone & Spoiler. This is a great find of a original 289 HiPo *FoMoCo housing dual point distributor. Would work great if your building a concours show car or you lost your 289 HiPo distributor or building a HiPo car or HiPo engine to sell.
Comes complete as in all the pictures with ***All NOS Motorcraft points & NOS condenser & NOS dual point breaker plate & NOS primary wire installed & NOS screw & hardware. New shaft bushing.
***Also including NOS Motorcraft cap & NOS Motorcraft rotor.
Still has nice looking original patina aluminum & machine finish.**NOT Spray Painted**
Look's NOS. **Ready to install & run!

https://www.ebay.com/itm/362879837811?ul_noapp=true

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a restored FoMoCo Hipo distributor by Ebay member "mysunshine302" with a starting bid of $750.00:

I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts too the up coming younger generations to use.
You are bidding on a professionally *totally restored *Original 289 HiPo FoMoCo housing (K) code dual point distributor. ***This is not a used service replacement Motorcraft or Autolite replacement housing HiPo dual point distributor. This is a 100% original FoMoCo housing HiPo dual point distributor. Distributor curb has been set up to original 1966 factory 289 HiPo spec. Ready to install and Rev!
Part number on original aluminum FoMoCo housing C50F-12127-E date code 8B27. Part number cast on lower aluminum housing C5OF-12131-B. Correct for the 289 HiPo (K) code engine in the Shelby GT350 & AC Cobra & Ford Mustang GT & Ford Fairlane GT & Ford Falcon Sprint & Mercury Comet & Mercury Cougar XR7 & Mercury Cyclone & Spoiler. This is a great find of a original 289 HiPo *FoMoCo housing dual point distributor. Would work great if your building a concours show car or you lost your 289 HiPo distributor or building a HiPo car or HiPo engine to sell.
Comes complete as in all the pictures with ***All NOS Motorcraft points & NOS condenser & NOS dual point breaker plate & NOS primary wire installed & NOS screw & hardware. New shaft bushing.
***Also including NOS Motorcraft cap & NOS Motorcraft rotor.
Still has nice looking original patina aluminum & machine finish.**NOT Spray Painted**
Look's NOS. **Ready to install & run!

https://www.ebay.com/itm/362879837811?ul_noapp=true

-Fred-

Display More

Keep in mind that the date code on this distributor is February 27, 1968 and is noted in the sellers description.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a restored FoMoCo Hipo distributor by Ebay member "mysunshine302" with a starting bid of $750.00:

I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts too the up coming younger generations to use.
You are bidding on a professionally *totally restored *Original 289 HiPo FoMoCo housing (K) code dual point distributor. ***This is not a used service replacement Motorcraft or Autolite replacement housing HiPo dual point distributor. This is a 100% original FoMoCo housing HiPo dual point distributor. Distributor curb has been set up to original 1966 factory 289 HiPo spec. Ready to install and Rev!
Part number on original aluminum FoMoCo housing C50F-12127-E date code 8B27. Part number cast on lower aluminum housing C5OF-12131-B. Correct for the 289 HiPo (K) code engine in the Shelby GT350 & AC Cobra & Ford Mustang GT & Ford Fairlane GT & Ford Falcon Sprint & Mercury Comet & Mercury Cougar XR7 & Mercury Cyclone & Spoiler. This is a great find of a original 289 HiPo *FoMoCo housing dual point distributor. Would work great if your building a concours show car or you lost your 289 HiPo distributor or building a HiPo car or HiPo engine to sell.
Comes complete as in all the pictures with ***All NOS Motorcraft points & NOS condenser & NOS dual point breaker plate & NOS primary wire installed & NOS screw & hardware. New shaft bushing.
***Also including NOS Motorcraft cap & NOS Motorcraft rotor.
Still has nice looking original patina aluminum & machine finish.**NOT Spray Painted**
Look's NOS. **Ready to install & run!

https://www.ebay.com/itm/362879837811?ul_noapp=true

-Fred-

Display More

Keep in mind that the date code on this distributor is February 27, 1968 and is noted in the sellers description.

-Fred-

Display More

This distributor received no bids by January 19, 2020 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a restored FoMoCo Hipo distributor by Ebay member "mysunshine302" with a starting bid of $750.00:

I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts too the up coming younger generations to use.
You are bidding on a professionally *totally restored *Original 289 HiPo FoMoCo housing (K) code dual point distributor. ***This is not a used service replacement Motorcraft or Autolite replacement housing HiPo dual point distributor. This is a 100% original FoMoCo housing HiPo dual point distributor. Distributor curb has been set up to original 1966 factory 289 HiPo spec. Ready to install and Rev!
Part number on original aluminum FoMoCo housing C50F-12127-E date code 8B27. Part number cast on lower aluminum housing C5OF-12131-B. Correct for the 289 HiPo (K) code engine in the Shelby GT350 & AC Cobra & Ford Mustang GT & Ford Fairlane GT & Ford Falcon Sprint & Mercury Comet & Mercury Cougar XR7 & Mercury Cyclone & Spoiler. This is a great find of a original 289 HiPo *FoMoCo housing dual point distributor. Would work great if your building a concours show car or you lost your 289 HiPo distributor or building a HiPo car or HiPo engine to sell.
Comes complete as in all the pictures with ***All NOS Motorcraft points & NOS condenser & NOS dual point breaker plate & NOS primary wire installed & NOS screw & hardware. New shaft bushing.
***Also including NOS Motorcraft cap & NOS Motorcraft rotor.
Still has nice looking original patina aluminum & machine finish.**NOT Spray Painted**
Look's NOS. **Ready to install & run!

https://www.ebay.com/itm/362879837811?ul_noapp=true

-Fred-

Display More

Keep in mind that the date code on this distributor is February 27, 1968 and is noted in the sellers description.

-Fred-

Display More

This distributor received no bids by January 19, 2020 and therefore did NOT sell.

-Fred-

Display More

This restored FoMoCo Hipo distributor is back on Ebay again with a much lower Buy-It-Now of $595.00:

https://www.ebay.com/itm/3628907097…em=362890709708

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a restored FoMoCo Hipo distributor by Ebay member "mysunshine302" with a starting bid of $750.00:

I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts too the up coming younger generations to use.
You are bidding on a professionally *totally restored *Original 289 HiPo FoMoCo housing (K) code dual point distributor. ***This is not a used service replacement Motorcraft or Autolite replacement housing HiPo dual point distributor. This is a 100% original FoMoCo housing HiPo dual point distributor. Distributor curb has been set up to original 1966 factory 289 HiPo spec. Ready to install and Rev!
Part number on original aluminum FoMoCo housing C50F-12127-E date code 8B27. Part number cast on lower aluminum housing C5OF-12131-B. Correct for the 289 HiPo (K) code engine in the Shelby GT350 & AC Cobra & Ford Mustang GT & Ford Fairlane GT & Ford Falcon Sprint & Mercury Comet & Mercury Cougar XR7 & Mercury Cyclone & Spoiler. This is a great find of a original 289 HiPo *FoMoCo housing dual point distributor. Would work great if your building a concours show car or you lost your 289 HiPo distributor or building a HiPo car or HiPo engine to sell.
Comes complete as in all the pictures with ***All NOS Motorcraft points & NOS condenser & NOS dual point breaker plate & NOS primary wire installed & NOS screw & hardware. New shaft bushing.
***Also including NOS Motorcraft cap & NOS Motorcraft rotor.
Still has nice looking original patina aluminum & machine finish.**NOT Spray Painted**
Look's NOS. **Ready to install & run!

https://www.ebay.com/itm/362879837811?ul_noapp=true

-Fred-

Display More

Keep in mind that the date code on this distributor is February 27, 1968 and is noted in the sellers description.

-Fred-

Display More

This distributor received no bids by January 19, 2020 and therefore did NOT sell.

-Fred-

Display More

This restored FoMoCo Hipo distributor is back on Ebay again with a much lower Buy-It-Now of $595.00:

https://www.ebay.com/itm/3628907097…em=362890709708

-Fred-

Display More

The auction for this restored FoMoCo Hipo distributor was ended by the seller January 28, 2020 with the following explanation "This listing was ended by the seller because there was an error in the listing".

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "valhallastudio" with a Buy-It-Now of $532.89:

Ford distributor, January 29 1968 date code.
See pictures for condition.
See my other Ford parts listed.

https://www.ebay.com/itm/FoMoCo-Dua…s4AAOSwUSRdjWVW

-Fred-

The listing for this used FoMoCo Hipo distributor was ended by the seller February 18, 2020 with the following explanation "This listing was ended by the seller because the item is no longer available".

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "valhallastudio" with a Buy-It-Now of $532.89:

Ford distributor, January 29 1968 date code.
See pictures for condition.
See my other Ford parts listed.

https://www.ebay.com/itm/FoMoCo-Dua…s4AAOSwUSRdjWVW

-Fred-

The listing for this used FoMoCo Hipo distributor was ended by the seller February 18, 2020 with the following explanation "This listing was ended by the seller because the item is no longer available".

-Fred-

Display More

The listing for this used FoMoCo Hipo distributor that was ended by the seller "because the item is no longer available" is back on Ebay again with no changes:

https://www.ebay.com/itm/2334996346…=STRK:MEWAX:VRI

-Fred-

Here is an Ebay auction for a used early FoMoCo Hipo distributor by Ebay member "zzzx12" with a Buy-It-Now of $875.00:

C30E 12127 D 289 HIPO DISTRIBUTOR

MUSTANG - FALCON - COMET - SHELBY COBRA

Very Nice Condition

Contact with any questions...Thanks

https://www.ebay.com/itm/C30E-12127…ucAAOSw9s5eWxLd

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used early FoMoCo Hipo distributor by Ebay member "zzzx12" with a Buy-It-Now of $875.00:

C30E 12127 D 289 HIPO DISTRIBUTOR

MUSTANG - FALCON - COMET - SHELBY COBRA

Very Nice Condition

Contact with any questions...Thanks

https://www.ebay.com/itm/C30E-12127…ucAAOSw9s5eWxLd

-Fred-

Display More

This used early FoMoCo Hipo distributor sold March 3, 2020 on Ebay for $875.00.

-Fred-

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "jwshelby2001 " with a starting bid of $0.99:

FoMoCo Dual Point Distributor 289 FORD 1965 1966 1967 GT350 MUSTANG and COBRA. Condition is Used. Very clean. Original wire end. Been stored in my house for the last 20 years. Should fit Sunbeam Tigers also. 271 horse HI PO engines. 5DD date code. You might not find a nicer one than this distributor. These are scarce,

https://www.ebay.com/itm/FoMoCo-Dua…&orig_cvip=true

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a FoMoCo Hipo distributor by Ebay member "jwshelby2001 " with a starting bid of $0.99:

FoMoCo Dual Point Distributor 289 FORD 1965 1966 1967 GT350 MUSTANG and COBRA. Condition is Used. Very clean. Original wire end. Been stored in my house for the last 20 years. Should fit Sunbeam Tigers also. 271 horse HI PO engines. 5DD date code. You might not find a nicer one than this distributor. These are scarce,

https://www.ebay.com/itm/FoMoCo-Dua…&orig_cvip=true

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "jwshelby2001 " with a starting bid of $0.99:

FoMoCo Dual Point Distributor 289 FORD 1965 1966 1967 GT350 MUSTANG and COBRA. Condition is Used. Very clean. Original wire end. Been stored in my house for the last 20 years. Should fit Sunbeam Tigers also. 271 horse HI PO engines. 5DD date code. You might not find a nicer one than this distributor. These are scarce,

https://www.ebay.com/itm/FoMoCo-Dua…&orig_cvip=true

-Fred-

This used FoMoCo Hipo distributor sold March 12, 2020 on Ebay for $400.00 with 22 bids from 11 bidders.

-Fred-

Here is an Ebay auction for a restored FoMoCo Hipo distributor by Ebay member "mysunshine302" with a starting bid of $595.00:

You are bidding on a professionally *totally restored *Original 289 HiPo FoMoCo housing (K) code dual point distributor. ***This is not a service replacement Motorcraft or Autolite replacement housing HiPo dual point distributor. This is a *100% original used FoMoCo housing 289 HiPo dual point distributor. It has been set up to original 1966 factory 289 HiPo spec. Ready to install and Rev!

Part number on original FoMoCo housing C50F-12127-E date code 6D2 = April, second week of 1966. Part number cast on lower aluminum housing C5OF-12131-B. Correct for the early 289 HiPo (K) code engine in the Shelby GT350 & AC Cobra & Ford Mustang GT & Ford Fairlane GT & Ford Falcon Sprint & Mercury Comet & Mercury Cougar XR7 & Mercury Cyclone & Spoiler. This is a great find of a original 1966 early 289 HiPo *FoMoCo housing dual point distributor. Great if your building a concours show car or you lost your 289 HiPo distributor or building a HiPo car or HiPo engine to sell.

Comes complete as in all the pictures with ***All NOS Motorcraft points & NOS condenser & NOS dual point breaker plate & NOS primary wire installed & NOS screw & hardware & New shaft bushing & NOS gear.

Still has nice looking original patina aluminum & machine finish.**NOT Spray Painted**

**Ready to install & run!

https://www.ebay.com/itm/289-HiPo-F…vcAAOSwiI1eZS0k

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a restored FoMoCo Hipo distributor by Ebay member "mysunshine302" with a starting bid of $595.00:

You are bidding on a professionally *totally restored *Original 289 HiPo FoMoCo housing (K) code dual point distributor. ***This is not a service replacement Motorcraft or Autolite replacement housing HiPo dual point distributor. This is a *100% original used FoMoCo housing 289 HiPo dual point distributor. It has been set up to original 1966 factory 289 HiPo spec. Ready to install and Rev!

Part number on original FoMoCo housing C50F-12127-E date code 6D2 = April, second week of 1966. Part number cast on lower aluminum housing C5OF-12131-B. Correct for the early 289 HiPo (K) code engine in the Shelby GT350 & AC Cobra & Ford Mustang GT & Ford Fairlane GT & Ford Falcon Sprint & Mercury Comet & Mercury Cougar XR7 & Mercury Cyclone & Spoiler. This is a great find of a original 1966 early 289 HiPo *FoMoCo housing dual point distributor. Great if your building a concours show car or you lost your 289 HiPo distributor or building a HiPo car or HiPo engine to sell.

Comes complete as in all the pictures with ***All NOS Motorcraft points & NOS condenser & NOS dual point breaker plate & NOS primary wire installed & NOS screw & hardware & New shaft bushing & NOS gear.

Still has nice looking original patina aluminum & machine finish.**NOT Spray Painted**

**Ready to install & run!

https://www.ebay.com/itm/289-HiPo-F…vcAAOSwiI1eZS0k

-Fred-

Display More

This restored distributor received no bids by March 29, 2020 and therefore did NOT sell.

-Fred-

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "susanandsuzyco" with a Buy-It-Now of $500.00:

This is an original FoMoCo

1965-67 Ford Shelby GT-350 Cobra / 289 Hi Po

Mechanical Advance / Dual Point Distributor

It is in good condition and turns nicely. This is an original

dated 6H10, (August 10, 1966), distributor, not a re-stamp.

Ford #C5OF-12127-E

Shaft #C5OF-12131-B

https://www.ebay.com/itm/1965-66-67…WAAAOSwGIVejH6n

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "susanandsuzyco" with a Buy-It-Now of $500.00:

This is an original FoMoCo

1965-67 Ford Shelby GT-350 Cobra / 289 Hi Po

Mechanical Advance / Dual Point Distributor

It is in good condition and turns nicely. This is an original

dated 6H10, (August 10, 1966), distributor, not a re-stamp.

Ford #C5OF-12127-E

Shaft #C5OF-12131-B

https://www.ebay.com/itm/1965-66-67…WAAAOSwGIVejH6n

-Fred-

Display More

This used FoMoCo Hipo distributor sold April 9, 2020 on Ebay for $500.00.

-Fred-

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "susanandsuzyco" with a Buy-It-Now of $500.00:

This is an original FoMoCo

1965-67 Ford Shelby GT-350 Cobra / 289 Hi Po

Mechanical Advance / Dual Point Distributor

It is in good condition and turns nicely. This is an original

dated 6H10, (August 10, 1966), distributor, not a re-stamp.

Ford #C5OF-12127-E

Shaft #C5OF-12131-B

https://www.ebay.com/itm/1965-66-67…WAAAOSwGIVejH6n

-Fred-

Display More

This used FoMoCo Hipo distributor sold April 9, 2020 on Ebay for $500.00.

-Fred-

-Fred-

Display More

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "toobadmustsell" with a Buy-It-Now of $499.99:

ORIGINAL FACTORY FORD C5OF-12127-E FOMOCO DUAL POINT DISTRIBUTOR with DATE 5BA, FITS FORD SMALL BLOCK HI-PO 289 and FACTORY REPLACE UNIT , FOR THE LATER BOSS 302 ENGINES , NICE USED CONDITION, AND HAS NOT BEEN MONKEY WITH ! I

https://www.ebay.com/itm/FORD-C5OF-…ysAAOSwM6hehraW

-Fred-