Used FoMoCo Hipo Distributor

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "mustangeer" with a starting bid of $600.00:

Original factory part C5OF-12127-E, for automatic or manual transmission use, K-code or GT350 Cobra Special SBF engine. Production housing has FoMoCo cast in it, unlike the later Autolite or Motorcraft service units, stamp dated 5LB (1965 Nov wk 2) suits mid production built cars. Full mechanical advance with no vacuum advance or standoff on the side. Professionally rebuilt and restored with many new parts by expert Tim O’Connor, it has not since been installed, place this quality unit proudly front and center on your 289 High Performance mill.

https://www.ebay.com/itm/65-66-1965…m4383.l4275.c10

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "mustangeer" with a starting bid of $600.00:

Original factory part C5OF-12127-E, for automatic or manual transmission use, K-code or GT350 Cobra Special SBF engine. Production housing has FoMoCo cast in it, unlike the later Autolite or Motorcraft service units, stamp dated 5LB (1965 Nov wk 2) suits mid production built cars. Full mechanical advance with no vacuum advance or standoff on the side. Professionally rebuilt and restored with many new parts by expert Tim O’Connor, it has not since been installed, place this quality unit proudly front and center on your 289 High Performance mill.

https://www.ebay.com/itm/65-66-1965…m4383.l4275.c10

-Fred-

This used FoMoCo Hipo distributor sold June 30, 2019 on Ebay for $621.00 with 2 bids from 2 bidders.

-Fred-

Here is an Ebay auction for a restored FoMoCo Hipo distributor by Ebay member "mysunshine302" with a starting bid of $575.00:

I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts too the up coming younger generations to use.
You are bidding on a professionally *totally restored by Logistic Automotive a *Original 289 HiPo FoMoCo housing (K) code dual point distributor. ***This is not a remanufactured Motorcraft or Autolite replacement housing HiPo dual point distributor. This is a 100% original FoMoCo housing HiPo dual point distributor. It has been set up to original 1966 factory 289 HiPo spec. Ready to install and Rev!
Part number on original FoMoCo housing C50F-12127-E date code 6A28 = January, 28 of 1966. Correct for the early 289 HiPo (K) code engine in the Shelby GT350 & AC Cobra & Ford Mustang GT & [/size]Ford Fairlane GT & Ford Falcon Sprint & Mercury Comet & Mercury Cougar XR7 & Mercury Cyclone & Spoiler. This is a great find of a original 1966 early 289 HiPo *FoMoCo housing dual point distributor. Great if your building a concours show car or you lost your 289 HiPo distributor or building a HiPo car or HiPo engine to sell.
Comes complete as in all the pictures with ***All NOS Motorcraft points & NOS condenser & NOS dual point breaker plate & NOS primary wire installed & NOS screw & hardware. New shaft bushing. Also including NOS Motorcraft cap & NOS Motorcraft rotor.
Still has nice looking original patina aluminum & machine finish.**NOT Spray Painted**
**Ready to install & run!

https://www.ebay.com/itm/289-HiPo-F…m4383.l4275.c10

-Fred-

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "welbury3028" with a Buy-It-Now of $500.00:

Fomoco Mustang Dual Point Mech Adv Distributor 302 FORD 1967 1968 1969 1970. Condition is Used.

C50F-12127-E
6D1

Has rust good for casing

https://www.ebay.com/itm/Fomoco-Mus…kIAAOSwHQRdjg99

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "welbury3028" with a Buy-It-Now of $500.00:

Fomoco Mustang Dual Point Mech Adv Distributor 302 FORD 1967 1968 1969 1970. Condition is Used.

C50F-12127-E
6D1

Has rust good for casing

https://www.ebay.com/itm/Fomoco-Mus…kIAAOSwHQRdjg99

-Fred-

Display More

This used FoMoCo Hipo distributor is incomplete as it does not have the breaker plate. The seller also states that it has rust, which it does.

-Fred-

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "valhallastudio" with a Buy-It-Now of $579.99:

Ford distributor, January 29 1968 date code.
See pictures for condition.
See my other Ford parts listed.

https://www.ebay.com/itm/FoMoCo-Dua…1.c100167.m2940

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a restored FoMoCo Hipo distributor by Ebay member "mysunshine302" with a starting bid of $575.00:

I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts too the up coming younger generations to use.
You are bidding on a professionally *totally restored by Logistic Automotive a *Original 289 HiPo FoMoCo housing (K) code dual point distributor. ***This is not a remanufactured Motorcraft or Autolite replacement housing HiPo dual point distributor. This is a 100% original FoMoCo housing HiPo dual point distributor. It has been set up to original 1966 factory 289 HiPo spec. Ready to install and Rev!Part number on original FoMoCo housing C50F-12127-E date code 6A28 = January, 28 of 1966. Correct for the early 289 HiPo (K) code engine in the Shelby GT350 & AC Cobra & Ford Mustang GT & Ford Fairlane GT & Ford Falcon Sprint & Mercury Comet & Mercury Cougar XR7 & Mercury Cyclone & Spoiler. This is a great find of a original 1966 early 289 HiPo *FoMoCo housing dual point distributor. Great if your building a concours show car or you lost your 289 HiPo distributor or building a HiPo car or HiPo engine to sell.
Comes complete as in all the pictures with ***All NOS Motorcraft points & NOS condenser & NOS dual point breaker plate & NOS primary wire installed & NOS screw & hardware. New shaft bushing. Also including NOS Motorcraft cap & NOS Motorcraft rotor.
Still has nice looking original patina aluminum & machine finish.**NOT Spray Painted****Ready to install & run!

https://www.ebay.com/itm/289-HiPo-F…m4383.l4275.c10

-Fred-

This restored FoMoCo Hipo distributor sold September 29, 2019 on Ebay for $575.00.

-Fred-

Quote from C6ZZKGT

This restored FoMoCo Hipo distributor sold September 29, 2019 on Ebay for $575.00.

-Fred-

Please note that this distributor has an odd date code as the date codes in this era were a number for the year and then 2 letters for the month and week of the month.

-Fred-

Quote from C6ZZKGT

This used FoMoCo Hipo distributor is incomplete as it does not have the breaker plate. The seller also states that it has rust, which it does.

-Fred-

This used FoMoCo Hipo distributor sold October 28, 2019 on Ebay for $500.00.

-Fred-

Here is an Ebay auction for a used early FoMoCo Hipo distributor by Ebay member "valhallastudio" with a Buy-It-Now of $592.89:

Dual point mechanical advance distributor, see pictures for condition.

See my other Ford parts listed.

https://www.ebay.com/itm/289-HIPO-F…28AAOSwlr1dx5yD

-Fred-

Here is an Ebay auction for a used early FoMoCo Hipo distributor by Ebay member "welbury3028" with a Buy-It-Now of $725.00:

1963-1965 Ford Distributor #C3OF12127F *RARE*. Condition is Used. Shipped with USPS Priority Mail.

https://www.ebay.com/itm/1963-1965-…5.c100005.m1851

-Fred-

Here is an Ebay auction for a used early FoMoCo Hipo distributor by Ebay member "naylorauto" with a Buy-It-Now of $700.00:

Available is a dual-point distributor. Production date November 1963. Has had a period Mallory coil attached to it. Also has a FoMoCo script cap, which appears to be in good condition. Free shipping to 48 states.

https://www.ebay.com/itm/1963-65-Sh…5.c100035.m1982

-Fred-

Here is an Ebay auction for a restored FoMoCo Hipo distributor by Ebay member "mysunshine302" with a starting bid of $9.95 on a reserve auction:

I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts too the up coming younger generations to use.
You are bidding on a professionally *totally restored *Original 289 HiPo FoMoCo housing (K) code dual point distributor. ***This is not a service replacement Motorcraft or Autolite replacement housing HiPo dual point distributor. This is a 100% original used FoMoCo housing HiPo dual point distributor. It has been set up to original 1966 factory 289 HiPo spec. Ready to install and Rev!
**This would make a great early Christmas gift.**
Part number on original FoMoCo housing C50F-12127-E date code 6D1 = April, first week of 1966. Part number cast on lower aluminum housing C5OF-12131-B. Correct for the early 289 HiPo (K) code engine in the Shelby GT350 & AC Cobra & Ford Mustang GT & Ford Fairlane GT & Ford Falcon Sprint & Mercury Comet & Mercury Cougar XR7 & Mercury Cyclone & Spoiler. This is a great find of a original 1966 early 289 HiPo *FoMoCo housing dual point distributor. Great if your building a concours show car or you lost your 289 HiPo distributor or building a HiPo car or HiPo engine to sell.
Comes complete as in all the pictures with ***All NOS Motorcraft points & NOS condenser & NOS dual point breaker plate & NOS primary wire installed & NOS screw & hardware & New shaft bushing & NOS gear.
Still has nice looking original patina aluminum & machine finish.**NOT Spray Painted**
**Ready to install & run!

https://www.ebay.com/itm/289-HiPo-F…utorefresh=true

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a restored FoMoCo Hipo distributor by Ebay member "mysunshine302" with a starting bid of $9.95 on a reserve auction:

I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts too the up coming younger generations to use.
You are bidding on a professionally *totally restored *Original 289 HiPo FoMoCo housing (K) code dual point distributor. ***This is not a service replacement Motorcraft or Autolite replacement housing HiPo dual point distributor. This is a 100% original used FoMoCo housing HiPo dual point distributor. It has been set up to original 1966 factory 289 HiPo spec. Ready to install and Rev!**This would make a great early Christmas gift.**
Part number on original FoMoCo housing C50F-12127-E date code 6D1 = April, first week of 1966. Part number cast on lower aluminum housing C5OF-12131-B. Correct for the early 289 HiPo (K) code engine in the Shelby GT350 & AC Cobra & Ford Mustang GT & Ford Fairlane GT & Ford Falcon Sprint & Mercury Comet & Mercury Cougar XR7 & Mercury Cyclone & Spoiler. This is a great find of a original 1966 early 289 HiPo *FoMoCo housing dual point distributor. Great if your building a concours show car or you lost your 289 HiPo distributor or building a HiPo car or HiPo engine to sell.
Comes complete as in all the pictures with ***All NOS Motorcraft points & NOS condenser & NOS dual point breaker plate & NOS primary wire installed & NOS screw & hardware & New shaft bushing & NOS gear.
Still has nice looking original patina aluminum & machine finish.**NOT Spray Painted****Ready to install & run!

https://www.ebay.com/itm/289-HiPo-F…utorefresh=true

-Fred-

Please note that this distributor has an odd date code as the date codes in this era were a number for the year and then 2 letters for the month and week of the month.

-Fred-

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "toobadmustsell" with a Buy-It-Now of $499.99:

[size=6]ORIGINAL FACTORY FORD C5OF-12127-E FOMOCO DUAL POINT DISTRIBUTOR with DATE 8B27, FITS FORD SMALL BLOCK HIPO 289 and FACTORY REPLACE UNIT , FOR THE LATER BOSS 302 ENGINES , NICE USED CONDITION, AND HAS NOT BEEN MONKEY WITH ! I THINK THIS ONE WAS SOLD OVER THE COUNTER FOR THE BOSS 302 REPLACEMENT, AS THE DATE IS 1968 FEB 27, [/size]

[size=4]https://www.ebay.com/itm/FORD-C5OF-…V0AAOSwMtdd1Ha5[/size]

[size=2]-Fred-[/size]

Quote from C6ZZKGT

Here is an Ebay auction for a used early FoMoCo Hipo distributor by Ebay member "valhallastudio" with a Buy-It-Now of $592.89:

C3OF-12127-F

Dual point mechanical advance distributor, see pictures for condition.

See my other Ford parts listed.

https://www.ebay.com/itm/289-HIPO-F…28AAOSwlr1dx5yD

-Fred-

Display More

This used early FoMoCo Hipo distributor sold December 10, 2019 on Ebay for $525.00.

-Fred-

Here is an Ebay auction for a used early FoMoCo Hipo distributor by Ebay member "olddudescarparts" with a Buy-It-Now of $1,350.00:

This listing is for a 289 HIPO distributor Fits all Ford and Mercury with 260 289 302 engines Thanks for looking see our return policy for returns Check our ebay store for more great deals on NOS items and good used Ford parts PLEASE READ BEFORE BIDDING... NOS,or NEW OLD STOCK does not mean the part is mint or even perfect! We do not own or sell anything that is perfect. Ford Motor Company has always been in the business of building mass produced vehicles and parts, NOT show cars When we describe something as being NOS that means it is new and has never been installed on a car.Any obvious flaws are mentioned and most times even pictured in the description so there should be no surprises,CHECK OUR FEEDBACK.We try our best to accurately describe the parts we sell but we can and do make mistakes just like everyone else .IF YOU HAVE ANY DOUBTS about the condition or application of the item being sold then please ask questions before bidding. Thank you for reading this and for your understanding.

https://www.ebay.com/itm/1964-1-2-1…ZkAAOSw6Mldctrf

-Fred-

Quote from C6ZZKGT

Please note that this distributor has an odd date code as the date codes in this era were a number for the year and then 2 letters for the month and week of the month.

-Fred-

This restored FoMoCo Hipo distributor sold December 15, 2019 on Ebay for $630.00 with 36 bids from 11 bidders.

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "toobadmustsell" with a Buy-It-Now of $499.99:

ORIGINAL FACTORY FORD C5OF-12127-E FOMOCO DUAL POINT DISTRIBUTOR with DATE 8B27, FITS FORD SMALL BLOCK HIPO 289 and FACTORY REPLACE UNIT , FOR THE LATER BOSS 302 ENGINES , NICE USED CONDITION, AND HAS NOT BEEN MONKEY WITH ! I THINK THIS ONE WAS SOLD OVER THE COUNTER FOR THE BOSS 302 REPLACEMENT, AS THE DATE IS 1968 FEB 27,

https://www.ebay.com/itm/FORD-C5OF-…V0AAOSwMtdd1Ha5

-Fred-

This Ebay auction for a used FoMoCo Hipo distributor was ended by the seller December 18, 2019 with the following explanation "This listing was ended by the seller because the item is no longer available".

-Fred-

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "valhallastudio" with a Buy-It-Now of $532.89:

Ford distributor, January 29 1968 date code.
See pictures for condition.
See my other Ford parts listed.

https://www.ebay.com/itm/FoMoCo-Dua…s4AAOSwUSRdjWVW

-Fred-