Used C5OE Heads

SixT5HiPo · April 15, 2007 at 6:36 PM

This set of rebuilt HiPo heads was SOLD for $1900.00 by eBay seller "mustang-67".

DESCRIPTION:

You are bidding very nice set of rare 289 HiPo 1966 Shelby GT350 heads. Heads have been completly rebuilt with new parts. Heads are numbered #19 & #20 with the 2 dots above the 289 marks. Built date on both heads are 6B25 - Feb 25, 1966. Additional pictures on request.

[Blocked Image: http://img.villagephotos.com/p/2007-6/1263969/heads041507-1.jpg]

[Blocked Image: http://img.villagephotos.com/p/2007-6/1263969/heads041507-2.jpg]

[Blocked Image: http://img.villagephotos.com/p/2007-6/1263969/heads041507-3.jpg]

[url=http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=011&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=320101361527&rd=1,1]eBay link[/url]

SixT5HiPo · April 20, 2007 at 8:37 PM

This modified set of remanufactured heads was SOLD for $511.00 by eBay seller "fi-v8".

DESCRIPTION:

The casting number on these 1965 289 4V (4 bbl) matched set of heads is C5OE. They have Milidon guide plates and Competetion Cams roller tip rockers. They are ported and polished and haven't been run since the fresh valve job. The heads have been lightly surfaced, and are in excellent condition. A friend was going to use them on a Cobra, and decided to sell it before it was completed.

[Blocked Image: http://img.villagephotos.com/p/2007-6/1263969/heads042007-1.jpg]

[Blocked Image: http://img.villagephotos.com/p/2007-6/1263969/heads042007-2.jpg]

[Blocked Image: http://img.villagephotos.com/p/2007-6/1263969/heads042007-3.jpg]

eBay link

CharlesTurner · May 15, 2007 at 7:30 PM

This set of used heads was SOLD for $800 by eBay seller "strikerskia".

BuyItNow set at $800

(These only lasted a little more than a couple hours once posted...)

DESCRIPTION:

*********MATCHED SET***********

FORD 289 "K" CODE HI-PO HEADS IN EXCELLENT CONDITION. PREVIOUSLY CHECKED FOR CRACKS. MATCHED SET. C50E CASTING. 4L16 DATE CODES. IF YOU ARE BUILDING A VINTAGE 289 HIGH PERFORMANCE MOTOR, THESE ARE THE PARTS FOR YOU. THANKS FOR LOOKING AND GOOD LUCK!

eBay link

[Blocked Image: http://img.villagephotos.com/p/2007-6/1263969/heads041607.jpg]

SixT5HiPo · May 20, 2007 at 9:17 PM

This pair of heads was SOLD for $1,380.55 by eBay seller "purefomoco".

DESCRIPTION:

Items shown for bid are a matching set of 271 HiPo-4V cylinder heads date coded 6A31 (Dec 31 1966). I was told (tale?) they were originally removed from a 67 Shelby Mustang GT 350 from a junk yard years ago in the (Herkemer area) near Albany NY (date codes however does correspond with 67 289 hi-po). Note: these heads could also be purchased over the counter through Ford Parts as a (4V Cobra Clyinder Head Kit) for use on any smallblock 289 65/66 and early 67 Ford products to upgrade performance with solid lifter hi-po cam .Casting time for both heads are to the day and hour ,could the tale be so?? Check photos please. High performance 289Special engines were found on Fairlanes,Mustangs,Comets and Shelby Cobras. I purchased these knowing they are a fresh rebuild (new springs,valves, etc.) but removed from an engine that broke a timing chain (within hours), and valves got slightly kissed by the pistons with no visable damage other than a mark (line across 3 exhaust valves as shown) but I recommend a machine shop check for any problems (bent valves, etc.) prior to installation. I was going to use on my 65 Cyclone but used the low compression heads and dished pistons for today's low octane gasoline. This is an honest discription as always on my e-bay aution items. Shipping costs to be actual amount by priority mail only.

[Blocked Image: http://img.villagephotos.com/p/2007-6/1263969/heads050107-1.jpg]

[Blocked Image: http://img.villagephotos.com/p/2007-6/1263969/heads050107-2.jpg]

[Blocked Image: http://img.villagephotos.com/p/2007-6/1263969/heads050107-3.jpg]

[Blocked Image: http://img.villagephotos.com/p/2007-6/1263969/heads050107-4.jpg]

eBay link

Participate now!