C3RA/C4RA/C4OZ 6394 A Wedge Cobra Bellhousing Scattershield

Quote from Dan Case

Quote from C6ZZKGT

Here is an Ebay auction for a remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing by Ebay member "mep1170" with a starting bid of $2,795.00 and a Buy-It-Now of $3,633.50:

Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289.

Like new or better! As the people in the know are aware - machining of these was not great from the factory.

This one was “blueprinted”making the block side & the transmission mounting surfaces perfectly true as they were designed to be, taking another “to do” out of your list.

All threads - transmission mounting & starter are in excellent condition.

Block plate is included.

Never plentiful these are next to impossible to find - especially in this condition.

Expensive - as rarity dictates. This one is for the person who will not compromise, demands & can afford the best!

International buyers please contact me BEFORE bidding. Thank you.

Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289 | eBay

-Fred-

Display More

This is item predates the Ford numbered casting. These were made with racing Cobras in mind starting in 1963. This is the second of two versions Shelby American is known to have used in Cobras.

Display More

Thank you for your input on this, Dan.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from Dan Case

Quote from C6ZZKGT

Here is an Ebay auction for a used C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing by Ebay member "mustangmasters428" with a starting bid of $3,595.00:

Here we have an extremely rare NOS early factory Blow Proof COBRA small block 5 bolt manual shift Bell housing for a 4 speed Ford Toploader or Super T 10 standard Shift Transmission. Ford cast the earlier small block motors with 5 mounting holes and 2 alignment pin holes at the back of blocks where the bell housing fastens. A very rare piece for this specific application this bell housing works for the Top loader or T10 4 speed or a T5 5 speed and Perfect for that A/C Cobra and we believe its New.

This small block bell housing is just what's needed to bolt your transmission to that early Ford 221, 260, or 289 with the early 5 bolt pattern on the back of the block. Colored in what we believe is the original color there are no reason not to believe it is not new a unrestored survivor. Rarer than rare surely a special part for a really valueable car I hope a fellow restorer helps it find the right home. Seen in the home page at 5 K were looking to find a owner at a much fairer price thanks in advance.

If you don't need a Cobra we also offer the Aluminum version described below just ask and well set up a auction just for you

This cast aluminum bell housing has been cleaned, detailed, and inspected, and has been found to be free of cracks, damage, modifications or any repairs.

In addition the steel block plate is ready to install and also as clean as the bell making this kit a nice find to complete your classic restoration. Commonly used in vehicles such as Mustang, Falcons, Fairlanes, Comets, Galaxies, and Rancheros, these are getting very hard to find, especially in a good clean undamaged ready to go condition. Note: Should you have the need we do have its automatic counterpart available here on eBay, we felt the call from our faithful customers to offer the standard shift version this week as part of our weekly offering of standard shift items such as transmissions, shifters, bell housings, and flywheels.

The quality of these units are time tested, as Ford used a better grade of metal and built these to specifications that fit the job and perform it well. For slightly more than the price of inferior quality reproductions, you can be the proud owner of this original piece. Good Bidding!

Shelby Cobra Scatter Shield Standard Shift Transmission Bellhousing | eBay

-Fred-

Display More

The five bolt design safety steel bell housings marked COBRA were painted a couple of different colors of silver depending on time period. Painting was done to the exterior only before any machine work was done to the castings. There was not a single casting version but a family for them started by Shelby American in 1963 for their racing Cobras and carried on by Ford Motor Company as over the counter accessories for several years.

The first two versions were created for Shelby American and have no Ford engineering number on them. The four other COBRA versions had Ford numbers on them. The maker also produced them under their own brand name and there was a version for Sunbeam Tigers. Dearborn Steel Tubing Company individually packaged parts for Ford and shipped them as required. Boxes with new old stock parts inside had a shipping label on them from Dearborn Steel Tubing Company but that is not who made them.

Display More

Very interesting information, Dan. Thank you for the contribution of your time in relating this information here.

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing received no bids by June 9, 2024 and therefore did NOT sell.

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing is back on Ebay again with the same starting bid of $3,595.00:

Shelby Cobra Scatter Shield Standard Shift Transmission Bellhousing | eBay

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing received no bids by July 7, 2024 and therefore did NOT sell.

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing is back on Ebay again with the same starting bid of $3,595.00:

Shelby Cobra Scatter Shield Standard Shift Transmission Bellhousing | eBay

-Fred-

Quote from Dan Case

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from Dan Case

Quote from C6ZZKGT

Here is an Ebay auction for a used C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing by Ebay member "mustangmasters428" with a starting bid of $3,595.00:

Here we have an extremely rare NOS early factory Blow Proof COBRA small block 5 bolt manual shift Bell housing for a 4 speed Ford Toploader or Super T 10 standard Shift Transmission. Ford cast the earlier small block motors with 5 mounting holes and 2 alignment pin holes at the back of blocks where the bell housing fastens. A very rare piece for this specific application this bell housing works for the Top loader or T10 4 speed or a T5 5 speed and Perfect for that A/C Cobra and we believe its New.

This small block bell housing is just what's needed to bolt your transmission to that early Ford 221, 260, or 289 with the early 5 bolt pattern on the back of the block. Colored in what we believe is the original color there are no reason not to believe it is not new a unrestored survivor. Rarer than rare surely a special part for a really valueable car I hope a fellow restorer helps it find the right home. Seen in the home page at 5 K were looking to find a owner at a much fairer price thanks in advance.

If you don't need a Cobra we also offer the Aluminum version described below just ask and well set up a auction just for you

This cast aluminum bell housing has been cleaned, detailed, and inspected, and has been found to be free of cracks, damage, modifications or any repairs.

In addition the steel block plate is ready to install and also as clean as the bell making this kit a nice find to complete your classic restoration. Commonly used in vehicles such as Mustang, Falcons, Fairlanes, Comets, Galaxies, and Rancheros, these are getting very hard to find, especially in a good clean undamaged ready to go condition. Note: Should you have the need we do have its automatic counterpart available here on eBay, we felt the call from our faithful customers to offer the standard shift version this week as part of our weekly offering of standard shift items such as transmissions, shifters, bell housings, and flywheels.

The quality of these units are time tested, as Ford used a better grade of metal and built these to specifications that fit the job and perform it well. For slightly more than the price of inferior quality reproductions, you can be the proud owner of this original piece. Good Bidding!

Shelby Cobra Scatter Shield Standard Shift Transmission Bellhousing | eBay

-Fred-

Display More

The five bolt design safety steel bell housings marked COBRA were painted a couple of different colors of silver depending on time period. Painting was done to the exterior only before any machine work was done to the castings. There was not a single casting version but a family for them started by Shelby American in 1963 for their racing Cobras and carried on by Ford Motor Company as over the counter accessories for several years.

The first two versions were created for Shelby American and have no Ford engineering number on them. The four other COBRA versions had Ford numbers on them. The maker also produced them under their own brand name and there was a version for Sunbeam Tigers. Dearborn Steel Tubing Company individually packaged parts for Ford and shipped them as required. Boxes with new old stock parts inside had a shipping label on them from Dearborn Steel Tubing Company but that is not who made them.

Display More

Very interesting information, Dan. Thank you for the contribution of your time in relating this information here.

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing received no bids by June 9, 2024 and therefore did NOT sell.

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing is back on Ebay again with the same starting bid of $3,595.00:

Shelby Cobra Scatter Shield Standard Shift Transmission Bellhousing | eBay

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing received no bids by July 7, 2024 and therefore did NOT sell.

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing is back on Ebay again with the same starting bid of $3,595.00:

Shelby Cobra Scatter Shield Standard Shift Transmission Bellhousing | eBay

-Fred-

Display More

This the first Ford numbered version C3RA-A. This version is also very rare in great usable condition.

Display More

Excellent observation, Dan. Thank you for your input.

-Fred-

Quote from C6ZZKGT

Quote from Dan Case

Quote from C6ZZKGT

Here is an Ebay auction for a remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing by Ebay member "mep1170" with a starting bid of $2,795.00 and a Buy-It-Now of $3,633.50:

Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289.

Like new or better! As the people in the know are aware - machining of these was not great from the factory.

This one was “blueprinted”making the block side & the transmission mounting surfaces perfectly true as they were designed to be, taking another “to do” out of your list.

All threads - transmission mounting & starter are in excellent condition.

Block plate is included.

Never plentiful these are next to impossible to find - especially in this condition.

Expensive - as rarity dictates. This one is for the person who will not compromise, demands & can afford the best!

International buyers please contact me BEFORE bidding. Thank you.

Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289 | eBay

-Fred-

Display More

This is item predates the Ford numbered casting. These were made with racing Cobras in mind starting in 1963. This is the second of two versions Shelby American is known to have used in Cobras.

Display More

Thank you for your input on this, Dan.

-Fred-

Display More

This remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing is back on Ebay again with the same starting bid of $2,795.00 and the came Buy-It-Now of $3,633.50:

Shelby Cobra 5-Bolt Scattershield Bellhousing C4OZ-6394-A C4RA-6395-A 260 289 | eBay

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from Dan Case

Quote from C6ZZKGT

Here is an Ebay auction for a used C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing by Ebay member "mustangmasters428" with a starting bid of $3,595.00:

Here we have an extremely rare NOS early factory Blow Proof COBRA small block 5 bolt manual shift Bell housing for a 4 speed Ford Toploader or Super T 10 standard Shift Transmission. Ford cast the earlier small block motors with 5 mounting holes and 2 alignment pin holes at the back of blocks where the bell housing fastens. A very rare piece for this specific application this bell housing works for the Top loader or T10 4 speed or a T5 5 speed and Perfect for that A/C Cobra and we believe its New.

This small block bell housing is just what's needed to bolt your transmission to that early Ford 221, 260, or 289 with the early 5 bolt pattern on the back of the block. Colored in what we believe is the original color there are no reason not to believe it is not new a unrestored survivor. Rarer than rare surely a special part for a really valueable car I hope a fellow restorer helps it find the right home. Seen in the home page at 5 K were looking to find a owner at a much fairer price thanks in advance.

If you don't need a Cobra we also offer the Aluminum version described below just ask and well set up a auction just for you

This cast aluminum bell housing has been cleaned, detailed, and inspected, and has been found to be free of cracks, damage, modifications or any repairs.

In addition the steel block plate is ready to install and also as clean as the bell making this kit a nice find to complete your classic restoration. Commonly used in vehicles such as Mustang, Falcons, Fairlanes, Comets, Galaxies, and Rancheros, these are getting very hard to find, especially in a good clean undamaged ready to go condition. Note: Should you have the need we do have its automatic counterpart available here on eBay, we felt the call from our faithful customers to offer the standard shift version this week as part of our weekly offering of standard shift items such as transmissions, shifters, bell housings, and flywheels.

The quality of these units are time tested, as Ford used a better grade of metal and built these to specifications that fit the job and perform it well. For slightly more than the price of inferior quality reproductions, you can be the proud owner of this original piece. Good Bidding!

Shelby Cobra Scatter Shield Standard Shift Transmission Bellhousing | eBay

-Fred-

Display More

The five bolt design safety steel bell housings marked COBRA were painted a couple of different colors of silver depending on time period. Painting was done to the exterior only before any machine work was done to the castings. There was not a single casting version but a family for them started by Shelby American in 1963 for their racing Cobras and carried on by Ford Motor Company as over the counter accessories for several years.

The first two versions were created for Shelby American and have no Ford engineering number on them. The four other COBRA versions had Ford numbers on them. The maker also produced them under their own brand name and there was a version for Sunbeam Tigers. Dearborn Steel Tubing Company individually packaged parts for Ford and shipped them as required. Boxes with new old stock parts inside had a shipping label on them from Dearborn Steel Tubing Company but that is not who made them.

Display More

Very interesting information, Dan. Thank you for the contribution of your time in relating this information here.

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing received no bids by June 9, 2024 and therefore did NOT sell.

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing is back on Ebay again with the same starting bid of $3,595.00:

Shelby Cobra Scatter Shield Standard Shift Transmission Bellhousing | eBay

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing received no bids by July 7, 2024 and therefore did NOT sell.

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing is back on Ebay again with the same starting bid of $3,595.00:

Shelby Cobra Scatter Shield Standard Shift Transmission Bellhousing | eBay

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing received no bids by August 4, 2024 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from Dan Case

Quote from C6ZZKGT

Here is an Ebay auction for a remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing by Ebay member "mep1170" with a starting bid of $2,795.00 and a Buy-It-Now of $3,633.50:

Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289.

Like new or better! As the people in the know are aware - machining of these was not great from the factory.

This one was “blueprinted”making the block side & the transmission mounting surfaces perfectly true as they were designed to be, taking another “to do” out of your list.

All threads - transmission mounting & starter are in excellent condition.

Block plate is included.

Never plentiful these are next to impossible to find - especially in this condition.

Expensive - as rarity dictates. This one is for the person who will not compromise, demands & can afford the best!

International buyers please contact me BEFORE bidding. Thank you.

Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289 | eBay

-Fred-

Display More

This is item predates the Ford numbered casting. These were made with racing Cobras in mind starting in 1963. This is the second of two versions Shelby American is known to have used in Cobras.

Display More

Thank you for your input on this, Dan.

-Fred-

Display More

This remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing is back on Ebay again with the same starting bid of $2,795.00 and the came Buy-It-Now of $3,633.50:

Shelby Cobra 5-Bolt Scattershield Bellhousing C4OZ-6394-A C4RA-6395-A 260 289 | eBay

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing received no bids by August 8, 2024 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from Dan Case

Quote from C6ZZKGT

Here is an Ebay auction for a remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing by Ebay member "mep1170" with a starting bid of $2,795.00 and a Buy-It-Now of $3,633.50:

Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289.

Like new or better! As the people in the know are aware - machining of these was not great from the factory.

This one was “blueprinted”making the block side & the transmission mounting surfaces perfectly true as they were designed to be, taking another “to do” out of your list.

All threads - transmission mounting & starter are in excellent condition.

Block plate is included.

Never plentiful these are next to impossible to find - especially in this condition.

Expensive - as rarity dictates. This one is for the person who will not compromise, demands & can afford the best!

International buyers please contact me BEFORE bidding. Thank you.

Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289 | eBay

-Fred-

Display More

This is item predates the Ford numbered casting. These were made with racing Cobras in mind starting in 1963. This is the second of two versions Shelby American is known to have used in Cobras.

Display More

Thank you for your input on this, Dan.

-Fred-

Display More

This remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing is back on Ebay again with the same starting bid of $2,795.00 and the same Buy-It-Now of $3,633.50:

Shelby Cobra 5-Bolt Scattershield Bellhousing C4OZ-6394-A C4RA-6395-A 260 289 | eBay

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing received no bids by August 8, 2024 and therefore did NOT sell.

-Fred-

Display More

Display More

This remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing is back on Ebay again with a new lower starting bid of $2,495.00 and a new lower Buy-It-Now of $3,295.00:

Shelby Cobra 5-Bolt Scattershield Bellhousing C4OZ-6394-A C4RA-6395-A 260 289 | eBay

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from Dan Case

Quote from C6ZZKGT

Here is an Ebay auction for a remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing by Ebay member "mep1170" with a starting bid of $2,795.00 and a Buy-It-Now of $3,633.50:

Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289.

Like new or better! As the people in the know are aware - machining of these was not great from the factory.

This one was “blueprinted”making the block side & the transmission mounting surfaces perfectly true as they were designed to be, taking another “to do” out of your list.

All threads - transmission mounting & starter are in excellent condition.

Block plate is included.

Never plentiful these are next to impossible to find - especially in this condition.

Expensive - as rarity dictates. This one is for the person who will not compromise, demands & can afford the best!

International buyers please contact me BEFORE bidding. Thank you.

Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289 | eBay

-Fred-

Display More

This is item predates the Ford numbered casting. These were made with racing Cobras in mind starting in 1963. This is the second of two versions Shelby American is known to have used in Cobras.

Display More

Thank you for your input on this, Dan.

-Fred-

Display More

This remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing is back on Ebay again with the same starting bid of $2,795.00 and the same Buy-It-Now of $3,633.50:

Shelby Cobra 5-Bolt Scattershield Bellhousing C4OZ-6394-A C4RA-6395-A 260 289 | eBay

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing received no bids by August 8, 2024 and therefore did NOT sell.

-Fred-

Display More

Display More

This remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing is back on Ebay again with a new lower starting bid of $2,495.00 and a new lower Buy-It-Now of $3,295.00:

Shelby Cobra 5-Bolt Scattershield Bellhousing C4OZ-6394-A C4RA-6395-A 260 289 | eBay

-Fred-

Display More

The listing for this new C4RA/C4OZ Wedge Cobra scattershield bellhousing was ended by the seller August 10, 2024 with the following explanation "This listing was ended by the seller because there was an error in the listing".

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from Dan Case

Quote from C6ZZKGT

Here is an Ebay auction for a remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing by Ebay member "mep1170" with a starting bid of $2,795.00 and a Buy-It-Now of $3,633.50:

Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289.

Like new or better! As the people in the know are aware - machining of these was not great from the factory.

This one was “blueprinted”making the block side & the transmission mounting surfaces perfectly true as they were designed to be, taking another “to do” out of your list.

All threads - transmission mounting & starter are in excellent condition.

Block plate is included.

Never plentiful these are next to impossible to find - especially in this condition.

Expensive - as rarity dictates. This one is for the person who will not compromise, demands & can afford the best!

International buyers please contact me BEFORE bidding. Thank you.

Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289 | eBay

-Fred-

Display More

This is item predates the Ford numbered casting. These were made with racing Cobras in mind starting in 1963. This is the second of two versions Shelby American is known to have used in Cobras.

Display More

Thank you for your input on this, Dan.

-Fred-

Display More

This remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing is back on Ebay again with the same starting bid of $2,795.00 and the same Buy-It-Now of $3,633.50:

Shelby Cobra 5-Bolt Scattershield Bellhousing C4OZ-6394-A C4RA-6395-A 260 289 | eBay

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing received no bids by August 8, 2024 and therefore did NOT sell.

-Fred-

Display More

Display More

This remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing is back on Ebay again with a new lower starting bid of $2,495.00 and a new lower Buy-It-Now of $3,295.00:

Shelby Cobra 5-Bolt Scattershield Bellhousing C4OZ-6394-A C4RA-6395-A 260 289 | eBay

-Fred-

Display More

The listing for this new C4RA/C4OZ Wedge Cobra scattershield bellhousing was ended by the seller August 10, 2024 with the following explanation "This listing was ended by the seller because there was an error in the listing".

-Fred-

Display More

This remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing is back on Ebay again with a new lower Buy-It-Now of $2,595.00 or make offer:

Shelby Cobra 5-Bolt Scattershield Bellhousing C4OZ-6394-A C4RA-6395-A 260 289 | eBay

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from Dan Case

Quote from C6ZZKGT

Here is an Ebay auction for a remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing by Ebay member "mep1170" with a starting bid of $2,795.00 and a Buy-It-Now of $3,633.50:

Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289.

Like new or better! As the people in the know are aware - machining of these was not great from the factory.

This one was “blueprinted”making the block side & the transmission mounting surfaces perfectly true as they were designed to be, taking another “to do” out of your list.

All threads - transmission mounting & starter are in excellent condition.

Block plate is included.

Never plentiful these are next to impossible to find - especially in this condition.

Expensive - as rarity dictates. This one is for the person who will not compromise, demands & can afford the best!

International buyers please contact me BEFORE bidding. Thank you.

Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289 | eBay

-Fred-

Display More

This is item predates the Ford numbered casting. These were made with racing Cobras in mind starting in 1963. This is the second of two versions Shelby American is known to have used in Cobras.

Display More

Thank you for your input on this, Dan.

-Fred-

Display More

This remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing is back on Ebay again with the same starting bid of $2,795.00 and the same Buy-It-Now of $3,633.50:

Shelby Cobra 5-Bolt Scattershield Bellhousing C4OZ-6394-A C4RA-6395-A 260 289 | eBay

-Fred-

Display More

This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing received no bids by August 8, 2024 and therefore did NOT sell.

-Fred-

Display More

Display More

This remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing is back on Ebay again with a new lower starting bid of $2,495.00 and a new lower Buy-It-Now of $3,295.00:

Shelby Cobra 5-Bolt Scattershield Bellhousing C4OZ-6394-A C4RA-6395-A 260 289 | eBay

-Fred-

Display More

The listing for this new C4RA/C4OZ Wedge Cobra scattershield bellhousing was ended by the seller August 10, 2024 with the following explanation "This listing was ended by the seller because there was an error in the listing".

-Fred-

Display More

This remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing is back on Ebay again with a new lower Buy-It-Now of $2,595.00 or make offer:

Shelby Cobra 5-Bolt Scattershield Bellhousing C4OZ-6394-A C4RA-6395-A 260 289 | eBay

-Fred-

Display More

This remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing sold October 6, 2024 on Ebay for $2,595.00.

-Fred-

Here is an Ebay auction for a used C3RA Wedge Cobra scattershield bellhousing by Ebay member "mustangmasters428" with a starting bid of $3,595.00:

Here we have an extremely rare NOS early factory Blow Proof COBRA small block 5 bolt manual shift Bell housing for a 4 speed Ford Toploader or Super T 10 standard Shift Transmission. Ford cast the earlier small block motors with 5 mounting holes and 2 alignment pin holes at the back of blocks where the bell housing fastens. A very rare piece for this specific application this bell housing works for the Top loader or T10 4 speed or a T5 5 speed and Perfect for that A/C Cobra and we believe its New.

This small block bell housing is just what's needed to bolt your transmission to that early Ford 221, 260, or 289 with the early 5 bolt pattern on the back of the block. Colored in what we believe is the original color there are no reason not to believe it is not new a unrestored survivor. Rarer than rare surely a special part for a really valueable car I hope a fellow restorer helps it find the right home. Seen in the home page at 5 K were looking to find a owner at a much fairer price thanks in advance.

Shelby Cobra Scatter Shield Standard Shift Transmission Bellhousing | eBay

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used C3RA Wedge Cobra scattershield bellhousing by Ebay member "mustangmasters428" with a starting bid of $3,595.00:

Here we have an extremely rare NOS early factory Blow Proof COBRA small block 5 bolt manual shift Bell housing for a 4 speed Ford Toploader or Super T 10 standard Shift Transmission. Ford cast the earlier small block motors with 5 mounting holes and 2 alignment pin holes at the back of blocks where the bell housing fastens. A very rare piece for this specific application this bell housing works for the Top loader or T10 4 speed or a T5 5 speed and Perfect for that A/C Cobra and we believe its New.

This small block bell housing is just what's needed to bolt your transmission to that early Ford 221, 260, or 289 with the early 5 bolt pattern on the back of the block. Colored in what we believe is the original color there are no reason not to believe it is not new a unrestored survivor. Rarer than rare surely a special part for a really valueable car I hope a fellow restorer helps it find the right home. Seen in the home page at 5 K were looking to find a owner at a much fairer price thanks in advance.

Shelby Cobra Scatter Shield Standard Shift Transmission Bellhousing | eBay

-Fred-

This used C3RA Wedge Cobra scatter shield bellhousing received no bids by May 18, 2025 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used C3RA Wedge Cobra scattershield bellhousing by Ebay member "mustangmasters428" with a starting bid of $3,595.00:

Here we have an extremely rare NOS early factory Blow Proof COBRA small block 5 bolt manual shift Bell housing for a 4 speed Ford Toploader or Super T 10 standard Shift Transmission. Ford cast the earlier small block motors with 5 mounting holes and 2 alignment pin holes at the back of blocks where the bell housing fastens. A very rare piece for this specific application this bell housing works for the Top loader or T10 4 speed or a T5 5 speed and Perfect for that A/C Cobra and we believe its New.

This small block bell housing is just what's needed to bolt your transmission to that early Ford 221, 260, or 289 with the early 5 bolt pattern on the back of the block. Colored in what we believe is the original color there are no reason not to believe it is not new a unrestored survivor. Rarer than rare surely a special part for a really valueable car I hope a fellow restorer helps it find the right home. Seen in the home page at 5 K were looking to find a owner at a much fairer price thanks in advance.

Shelby Cobra Scatter Shield Standard Shift Transmission Bellhousing | eBay

-Fred-

This used C3RA Wedge Cobra scatter shield bellhousing received no bids by May 18, 2025 and therefore did NOT sell.

-Fred-

Display More

This used C3RA Wedge Cobra scattershield bellhousing is back on Ebay again with the same starting bid of $3,595.00:

Shelby Cobra Scatter Shield Standard Shift Transmission Bellhousing | eBay

-Fred-