Used C5DA Bellhousing

Quote from C6ZZKGT

Here is an Ebay auction for a used C5DA bellhousing by Ebay member "FORD PARTS AND ACCESSORYS" with a Buy-It-Now of $349.33:

This auction is for a clean used Original 3 & 4 Speed Manual Transmission Bell Housing for a 1965 1966 1967 1968 Ford or Mercury with a 6 BOLT 289 302 289 HiPo V8. This is Ford part number C5DZ-6392-A with Ford ID number C5DA-6394-A. It accepts a 157 tooth flywheel and both a 10" and 10 1/2" clutch and pressure plate. This has good threads and is clean and ready to install. This will also fit a 1969 1970 1971 1972 1973 302 in a Mustang Fairlane Torino Ranchero Shelby GT350 Cougar Cyclone Comet Montego. This includes the later 1968 style clutch fork pivot. You are welcome to come to our central New Jersey shop to inspect or pick up. If you have any questions or need other clutch linkage components, please ask. Thank-you and Happy Ebaying! (033026)

1965 66 67 1968 FORD 289 MUSTANG 3 & 4 SPEED BELL HOUSING FOR 157 TOOTH FLYWHEEL | eBay

-Fred-

The listing for this used C5DA bellhousing was ended by the seller April 15, 2026 with the following explanation "This listing was ended by the seller because the item is no longer available".

-Fred-

Here is an Ebay auction for a used C5DA bellhousing by Ebay member "mustangmanbob" with a Buy-It-Now of $285.00 or make offer:

Original Ford cast aluminum manual transmission bellhousing casting number C5DA-6394-A

157 tooth

1965 1966 1967 1968 1969 1970 1971 1972 1973

289 302 351W

Please note most cars used a 164 tooth after 1968 but this will fit with the 157 tooth fly.

Mustang Falcon Fairlane Ranchero Galaxie Torino Maverick Comet Montego

This will work with many many Ford V8 engines including 289 302 and 351. Bellhousing has the correct factory drilled and tapped 6 bolt (1965 and up) mounting bolt pattern. There is one alignment pin hole that has a chip, but this will not affect the transmission when installed.

Works with lots of different manual transmissions including 3 and 4 (top loader and Borg Warner) and 5 speed with the adapter plate.

. All threads checked and are good. Please zoom in on all pictures.

I would run a tap in all of them just to make sure everything is good.

Pictures give the best description and information on the item.

Fitment chart from factory

C5DA usage also.

Shipping price is US 48 only, and ebay global shipping center.

Ford V8 Bell housing 4 5 Speed Trans 289 351W 302 C5DA-6394-A Mustang Fairlane + | eBay

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used C5DA bellhousing and clutch fork by Ebay member "mustangmanbob" with a Buy-It-Now of $285.00 or make offer:

Original Ford cast aluminum manual transmission bellhousing casting number C5DA-6394-B

157 tooth

1965 1966 1967 1968 1969 1970 1971 1972 1973

289 302 351W

Please note most cars used a 164 tooth after 1968 but this will fit with the 157 tooth fly.

Mustang Falcon Fairlane Ranchero Galaxie Torino Maverick Comet Montego

This will work with many many Ford V8 engines including 289 302 and 351. Bellhousing has the correct factory drilled and tapped 6 bolt (1965 and up) mounting bolt pattern. It also has 2 extra holes drilled for the T5 adapter. They will not affect using a top loader, but I am pointing them out.

Works with lots of different manual transmissions including 3 and 4 (top loader and Borg Warner) and 5 speed with the adapter plate.

There are no cracks or repairs, but there are 2 flaws

1 tiny chipped being pointed to in picture 4. I would just put some epoxy on it

Small chip in picture 6 on trans mouting hole. The bolt in it seats well and is very tight, so no impact.

I have the T5 plate in another listing, and also a new engine trans spacer plate in another listing. If you want either or both of those, we can make a deal and no increase in shipping cost.

All threads checked and are good. Please zoom in on all pictures.

There are bolts threaded into the threaded holes. I would run a tap in all of them just to make sure everything is good. Stud in starter hole to make it easier to hang the starter. It can be removed if desired.

Pictures give the best description and information on the item. Bolts are free, not correct length, just to test hole threads.

Clutch Fork included, and is FREE, as it is dirty.

Ford V8 Bell housing 4 5 Speed Trans 289 351W 302 C5DA-6394-A Mustang Fairlane + | eBay

-Fred-

Display More

This used C5DA bellhousing sold May 4, 2026 on Ebay for $285.00.

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used C5DA bellhousing by Ebay member "JOHN427" with a Buy-It-Now of $375.00 or make offer:

Date code 1966 March

Found this in a crate of my endless collection of vintage Mustang parts.it’s perfect for a real hipo car. Just cleaned it with Simple Green. Still has that stuff they use to use for corrosion protection on the sides was not going to hot tank it. The bolts and clutch fork come with it. Look at all the photos.

FEEL FREE TO ASK ANY QUESTIONS??

The product is a vintage 1965-1968 Ford 289 HIPO Mustang Shelby 4-speed bell housing, made in the United States. This performance part is a genuine Ford OEM part with the OE/OEM part number C5DZ6392A and manufacturer part number C5DA6394A. It is designed for a manual transmission and rear-wheel drive vehicles, specifically the Ford Shelby models.

I even built a crate for it.

WILL SHIP TO THE LOWER 49 STATES ONLY!!!

1965 1966 1967 1968 FORD 289 HIPO MUSTANG SHELBY 4 SPEED BELL HOUSING EXCELLENT | eBay

-Fred-

Display More

This used C5DA bellhousing sold May 20, 2026 on Ebay for $375.00.

Quote from C6ZZKGT

Here is an Ebay auction for a used C5DA bellhousing by Ebay member "mustangmanbob" with a Buy-It-Now of $285.00 or make offer:

Original Ford cast aluminum manual transmission bellhousing casting number C5DA-6394-A

157 tooth

1965 1966 1967 1968 1969 1970 1971 1972 1973

289 302 351W

Please note most cars used a 164 tooth after 1968 but this will fit with the 157 tooth fly.

Mustang Falcon Fairlane Ranchero Galaxie Torino Maverick Comet Montego

This will work with many many Ford V8 engines including 289 302 and 351. Bellhousing has the correct factory drilled and tapped 6 bolt (1965 and up) mounting bolt pattern. There is one alignment pin hole that has a chip, but this will not affect the transmission when installed.

Works with lots of different manual transmissions including 3 and 4 (top loader and Borg Warner) and 5 speed with the adapter plate.

. All threads checked and are good. Please zoom in on all pictures.

I would run a tap in all of them just to make sure everything is good.

Pictures give the best description and information on the item.

Fitment chart from factory

C5DA usage also.

C5DA-6394-A [Blocked Image: https://www.mustangtek.com/4100/images/289Hipo_000.jpg]

65-66 289 Falcon 2v 3_4sp 65-68 289 Mustang 2v 3_4sp 65-67 289 Hipo Mustang 4sp from_8/20/64) 65-67 289 Mustang Falcon 4v-PF 4sp 70+ 302 Maverick w/MT

Shipping price is US 48 only, and ebay global shipping center.

Ford V8 Bell housing 4 5 Speed Trans 289 351W 302 C5DA-6394-A Mustang Fairlane + | eBay

-Fred-

Display More

This used C5DA bellhousing sold May 22, 2026 on Ebay for $285.00.

-Fred-