Original exhaust manifolds

Here's another set of used manifolds that <b>SOLD</b> for $225.00.

<b>DESCRIPTION</b>:

These are an original set of 289 HiPo exhaust manifolds and are in very good condition. I bought these but have decided to use headers instead. One of them was listed as being NOS, but I can't tell which one it is just by looking at them. They are both in excellent shape and very clean. The casting numbers are C7ZE-9431-A and C7ZE-0430-A. They only need studs to hold the exhaust pipes to them. I have seen other hipo manifolds like these sold on Ebay, but nowhere in this kind of condition. I have done nothing to these, there is absolutely no rust on them. Just bolt them on and go. These would make an excellent addition to a HiPo 289 or Shelby.

<center>[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…old020305-1.jpg]</center>

<center>[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…old020305-2.jpg]</center>

http://cgi.ebay.com/ebaymotors/ws/…me=STRK:MEWA:IT

This set of used manifolds <b>SOLD</b> for $304.00.

<b>DESCRIPTION</b>:

289 HiPo original exhaust manifolds in good used condition. These are originals, and need new bolts. I am parting a 289 HiPo engine and will be listing the rest of it soon. Carb is already gone. Buyer pays $30.00 s/h USA USPS Parcel Post (international s/h will be more). I accept paypal, money orders, and checks.

<center>[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…lds031305-1.jpg]</center>

<center>[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…lds031305-2.jpg]</center>

<center>[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…lds031305-3.jpg]</center>

<center>ebay link</center>

Here's a set that <b>SOLD</b> for $280.55.

<b>DESCRIPTION</b>:

THIS AUCTION IS FOR A PAIR OF LEFT AND RIGHT SIDE HI PO 289 EXHAUST MANIFOLDS TO FIT A 1965-1966-1967 MUSTANG. FORD PART #C3OE-9431-B & #C7ZE-9430-A. THESE MANIFOLDS HAVE BEEN MEDIA BLASTED AND SPRAYED WITH A HIGH TEMPERATURE PAINT CONTAINING CERAMIC AND ARE IN GREAT SHAPE...READY FOR INSTALLATION IN YOUR SHOW CAR. THANK YOU FOR LOOKING AND HAPPY BIDDING.

<center>[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…lds031205-1.jpg]</center>

<center>[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…lds031205-2.jpg]</center>

<center>[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…lds031205-3.jpg]</center>

<center>ebay link</center>

This used pair of manifolds is painted silver and <b>SOLD</b> for $208.16.

<b>DESCRIPTION</b>:

Original 65 K code Mustang exhaust manifolds. These are in great shape, and they were sprayed silver to keep them from rusting years ago. Part numbers are visible in photos. Ask questions before bidding. USA & Canada sales only.

<center>[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…folds032505.jpg]</center>

<center>ebay link</center>

Here's a used set of exhaust manifolds that <b>SOLD</b> for $260.00.

<b>DESCRIPTION</b>:

Hi all. This is a set of High Performance K code 271 HP Ford Mustang exhaust manifolds. NO RESERVE AUCTION! The year of these are 1965-66 the numbers are, pass side, C4ZE-0430-A and below that is G2 and on the inner side is cast "10 4 5" Driver side, C30E-9431-E and below that is G3 and on the inner side is cast "10 14 5". No cracks or welds on the shelf in a box for the past 28 years. Thanks...

<center>[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…lds032705-1.jpg]</center>

<center>[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…lds032705-2.jpg]</center>

<center>ebay link</center>

This set of used manifolds <b>SOLD</b> for $222.50. (Note the heat riser fitting on the C3OE-C manifold identifying it as an early HiPo Fairlane piece used with automatic chokes.)

<b>DESCRIPTION</b>:

Pair of Ford 289 HIPO factory exhaust manifolds, #C3OE-9430-C, and C7ZE-9431-A, very nice cond. Satisfaction guaranteed, full refund if not as described.

<center>[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…folds033105.jpg]</center>

<center>ebay link</center>

Here's another set of early Fairlane HiPo manifolds that <b>SOLD</b> for $310.00. (Note the incorrect casting numbers that the seller has in the description, and the erronious reference to them as being for Mustangs. While they will fit Mustangs perfectly, these are actually early HiPo Fairlane castings.)

<b>DESCRIPTION</b>:

This is a set of High Performance K Code 289 HP Ford Mustang exhaust manifolds. The year of these are 65-68. The number for the left side is G30E-9431-B and below that is G3. The number for the right side is G30E-9430-G. No Cracks or Welds. Have advertised locally so have the right to end early. Happy bidding.

<center>[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…lds040405-1.jpg]</center>

<center>ebay link</center>

Here's a used set of exhaust manifolds that <b>SOLD</b> for $155.50.

<b>DESCRIPTION</b>:

The REAL DEAL !

Original Ford K code HiPo exhaust manifolds from a Mustang fastback. I bought these a while ago and had them in storage. I had them Ceramic Coated because it's the strongest coating that can be applied without turning color or flaking off from heat.

Beautiful in every aspect, there are no broken tabs or studs, and they are in very nice condition as the pictures show. These will be perfect for that restoration to that K code HiPo Ford! Don't miss out on these rare and factory Ford original items. Why settle for reproductions when you can have the real deal!

<center>[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…lds070405-1.jpg]

[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…lds070405-2.jpg]

eBay link</center>

Here's a used left side exhaust manifold that <b>SOLD</b> for $177.50.

<b>DESCRIPTION</b>:

Original 289-306 HP 1967 Shelby GT-350 Exhaust Manifold.

Original 289-271 HiPo Exhaust Manifold 1964 1/2, 1965, 1966, 1967, Ford Mustang.

This is a rare ORIGINAL High Performance driver's side exhaust manifold. This is NOT A REPRODUCTION Part.

Clean blasted, NOT Painted, Honest BARE metal, and in EXCELLENT Condition with No Cracks, Porting, or other visable flaws. Studs & threads are in good condition too.

<center>[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…old072405-1.jpg]

[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…old072405-2.jpg]

eBay link</center>

Here's a pair of used manifolds that <b>SOLD</b> for $260.00.

<b>DESCRIPTION</b>:

Original 289 HiPo exhaust manifolds. Exhaust manifolds are in good condition. They will need new studs. I had the old ones removed. #'s are C4ZE-9430-A & C3OE-9431-B. Buyer pays $30.00 s/h USA USPS Parcel Post (international s/h will be more). I accept paypal, money orders, and checks. I wait 10 days for checks to clear before shipping. If you have any questions please email me.

<center>

[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…olds09205-1.jpg]

[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…olds09205-2.jpg]

eBay link</center>

A single used left side exhaust manifold <b>SOLD</b> for $104.01.

<b>DESCRIPTION</b>:

YOU ARE BIDDING ON AN ORIGINAL DRIVER'S SIDE EXHAUST MANIFOLD FOR THE 271 HORSEPOWER HIPO 289 V8. THIS PART HAS BEEN FULLY CLEANED AND INSPECTED, AND IS READY FOR INSTALLATION. THE HEAD FLANGE SURFACE IS CLEAN AND STRAIGHT, AND THE THREADS FOR THE EXHAUST STUDS ARE IN GREAT SHAPE. THERE ARE NO VISIBLE CRACKS OR OTHER DAMAGE.

THE PART NUMBER IS C3OE-9431-B AND THE DATE CODE IS 10 13 5.

THIS MANIFOLD WILL FIT ALL EARLY MUSTANGS, FALCONS, FAIRLANES AND COMETS WITH A SMALL BLOCK FORD V8. IT IS A MUCH BETTER DESIGN THAN THE OTHER MANIFOLDS OF THE ERA.

<center>

[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…old092005-1.jpg]

[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…old092005-2.jpg]

eBay link</center>

Here's a set of used manifolds that <b>SOLD</b> for $315.00.

<b>DESCRIPTION</b>:

ORIGINAL 289 HIPO EXHAUST MANIFOLDS FROM AN EARLY MUSTANG. IN PRETTY GOOD SHAPE FOR BEING 40 YEARS OLD. CASTING NUMBERS, C4ZE-9430-A AND C3OE-9431-B. SHIPPING TO BE CALCULATED AT AUCTIONS END TO WINNING BIDDERS ZIP CODE.

<center>

[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…folds100605.jpg]

eBay link</center>

Here's yet another set of used exhaust manifolds that <b>SOLD</b> for $228.50.

<b>DESCRIPTION</b>;

This auction is for a used pair of 289 HiPo exhaust manifolds, which were used on K-code Mustangs, Fairlanes, and Shelbys. The driver's side has part # C3OE 9431-B and the passenger side has part # C4ZE 9430-A.

<center>

[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…lds120705-1.jpg]

eBay link</center>

This set of used manifolds <b>SOLD</b> for $225.00.

<b>DESCRIPTION</b>:

You are bidding on a pair of original Mustang Hipo exhaust manifolds. Part number C4ZE-9430-A with G2 and C3OE-9431-B. The drivers side alpha code underneath part number is unreadable but there is a 2 that is legible. Date codes on other side read 6 22 5 passenger side and 10 8 5 drivers side. Minor surface rust on back side of drivers side but could be cleaned up easily. No cracks and studs are in good shape. These were purchased from Bob's Ford Parts in Portland, Oregon and never used.

<center>

[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…old010706-1.jpg]

[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…old010706-2.jpg]

[Blocked Image: http://www.hipomustang.com/cgi-bin/parts/…old010706-3.jpg]

eBay link</center>

This set of used manifolds <b>SOLD</b> for $286.00.

<b>DESCRIPTION</b>:

Welcome! Up for bid are these 289 High Performance Exhaust manifolds. These were removed from a 1966 K code Mustang over 25 years ago. RH manifold is stamped C4ZE-9430-A and G1...on the reverse side the date stamping is 2-9-6 (6 may be a 5). The LH manifold is stamped C3OE-9431-B and G2...on the reverse side the date stamping is 11-2-5 (5 is tough to make out). They are in great shape with NO issues other than what you see...Grab 'em!

<center>eBay link</center>

This set of used manifolds <b>SOLD</b> for AU$350.00.

<b>DESCRIPTION</b>:

Up for auction is a pair of HIPO - K Code exhaust manifolds for Mustangs. They are coded:

C30Z-9431-B

C5ZZ-9430-B

CONDITION: No cracks, repairs have been done to them, all four exhaust flange studs are intact and threads are fine.

These sell well over US$250+ in the states alone - when & if they are listed. Was planing to install into my 67 Stang, but have changed to a different head package that requires much larger ports.

Postage will be determined at auction's end . An additional $5.00 handling charge is applicable for trip to Post office (petrol cost) & for packing materials.

Happy bidding.

<center>

eBay link</center>

After one relisting, this pair of used manifolds <b>SOLD</b> for $299.99 by seller "bossmusclecars".

<b>DESCRIPTION</b>:

One pair of original Ford 289 HIPO exhaust manifolds. Left side part # C3OE-9431-B. Right side part # C4ZE-9430-A. These are super nice original castings with no heavy pitting. Exhaust studs are intact. These manifolds had been cleaned and painted with cast iron grey paint, but they have developed some minor surface rust from sitting. There are no apparent cracks or breaks. Overall, a very nice original set of HiPo manifolds.

<center>eBay link</center>

This set of used manifolds <b>SOLD</b> for $175.00 by eBay seller "clssic67".

<b>DESCRIPTION</b>:

These manifolds are ORIGINAL, and I am selling them for cheaper than reproduction units that go for $300. My manifolds were pulled from the wrecking yard in the 70's and used on my 1967 Mustang C-code until now. I sandblasted and painted these with high temp flat black to make them look brand new. The date codes are a little hard to read. One of them has the two studs still in it. The other studs were bad and were pulled off with the nuts that wouldnt come off them. These come with the flanges on the end. No hardware included.

Drivers side: C30E-9431-B.

Passenger side: C4ZE-9430-A

Build date codes are as follow(as best as I can read)

DS: A165

PS: L164

<center>

eBay link</center>

Here's a used set of original exhaust manifolds that <b>SOLD</b> for $350.00 by eBay seller "jone67".

<b>DESCRIPTION</b>:

Here is an original set of 289 High Performance exhaust manifolds. Drivers side has C3OE prefix and passenger side has C4ZE. These would work on your 1964, 1965, 1966, or 1967 K code Mustang. They would also be correct for an early 67 Shelby GT 350. They are in good used condition. They do have some pitting and would benefit from bead blasting and painting. Selling at NO RESERVE! Thanks for looking.

<center>

eBay lonk</center>

This set of used exhaust manifolds was <b>SOLD</b> for $250.00 by eBay seller "wundrtwn2".

<b>DESCRIPTION</b>:

Here's a nice pair of HiPo 289 manifolds. Will bolt in any "Windsor" motor in a Mustang, Fairlane, Comet, Cougar, the list goes on. No cracks or problems.

<center>

eBay link</center>