January 2, 2010 at 9:45 PM #21 DaveI will look tomorrow, but I cant recall seeing an inner clip. Which if there is not will mean those caps are there by the grace of god.I'll let you know.Thanks
January 2, 2010 at 10:25 PM #22 Google is your friend!http://www.driveshaftspecialist.com/HTML%20measure…ID%20Guide.html
January 3, 2010 at 7:09 AM #23 Google sure is.OKI have a modified driveshaft with an inner lock front joint.I have done lots of searching and know what length I need between joint centres.One dimension I do not have is the length of the front slip yoke - tip to joint centreline.The site Charles gave me says 7.75" with a 1310 outerlock joint.I have 8.25" with an innerlock joint.Is the 7.75" correct?I Have 2 options, buy the correct slip yoke, tube yoke and joint and get the one I have rebuilt.Or look for a second hand unit and get it shortened.I have not come across an inner lock joint before - I now know my joint wont fall apart.If someone would kindly confirm the front slip yoke length that would be great.Charles, I am sorry to intrude on your posting about markings.Thanks for the help everyone