Hipo Rotating assembly

I have a complete Hipo assembly including Crank .010/010 with correct Brinnel test mark, Correct C3AE 3/8 bolt rods with new ARP bolts and resized to correct specs on Sunnen equipment (by me, I own a state of the art machine shop). The Pistons are Old school 289 TRW forgings with larger valve reliefs cut. The pistons are .030 and have been used for about 500 miles, but are in excellent condition. There is also a set of speed pro rings, but they have 500 miles on them and you may not want to use used rings. I will also include a new set of clevite bearings with the correct set of hipo rod bearings, not the generic cb-634p std 289/302 bearing. The complete assembly has been computor balanced on Sunnen equipment.

I am asking $1200 and this includes the timing set and hatchet.

770-622-4979 or email at maloofracing at mindspring dot com

Thanks, Bryan

I pulled this stuff out yesterday, and found that I have thrown away the rings. I will include a new set of Sealed Power Moly riings with the assy.

I have had a number of questions if this is a 5 or 6 bolt block. There is no block.......it is a rotating assembly. I also found the flywheel that the engine was balanced with, and has a 5G30 date. The engine that this came out of is dated 5H17. I believe this to be a Hipo flywheel, but no way to tell for sure. It has a paint mark, but it is too faded to tell if it is truely orange.