Hi,
Can you please merge my old account? Pretty sure it's the same name.
Thanks.
Hi,
Can you please merge my old account? Pretty sure it's the same name.
Thanks.
I have to say that any trouble I went to for the system to fit right was worth every bit for the great sound on the road. Just fantastic!
Phil.
I bought H-pipe and arvinode from NPD. Had them fitted by my mechanic, they hung way too low, so I took it to exhaust shop who removed whole system and changed angles on H-pipe to allow system to sit closer to floor. Problem was the H-pipe angles so make sure it's right before welding anything!
Phil.
We'll welcome her into the K "fold".
Phil.
I have my belt adjusted fully to the end of the bracket and the belt is still loose. Seems the belt is almost too big. Anyone else have this issue with the Kevin Marti repro belts?
Phil.
Hi Fred,
We've removed the pin and the seal fits much better, we just wanted to make sure that was the only pin before we put it all back together.
Thanks again. Phil.
Hi guys,
I'm having a rear main seal oil leak investigated and was wondering if there is only one locating pin for the seal. Found one on the bottom half, but is there another one on the top half?
Wanting to avoid removing the engine to find out. We're replacing the rope seal with a neoprene one and it doesn't sit flush with the pin there.
Thanks. Phil.
You guys should be on the stage. The next one out of town!!! <img src=images/icon_smile_big.gif border=0 align=middle>
Have a great day.
Phil.
Edited by - oziphil on 02/09/2011 07:20:38
Thanks, guys. And yes, why didn't I look in Bob's "bible"!! Thanks again, Bob.
Phil.
Thank, Jim.
Can someone explain(photo if poss.) how the accelerator return spring(next to carb) locates, along with it's bracket.
Autolite 4100 hipo carb, 06L SJ f/b.
Thanks. Phil.
Can anyone show how the wiring runs from firewall to temp sender etc across the top of the engine. Or a clear explanation please.
06L SJ F/back.
Thanks. Phil.
Another Aussie K. Well done and welcome!
Phil.
Guys,
Is the clip that holds the 2 brake lines(near the brake master cyl.)the same as the one near the heater blower motor that holds 1? My brake line clip kit has 3 that are all the same size, so will the 2 lines fit in the one clip together? Haven't taken them out of the packet to try yet.
Thanks. Phil.
Thanks, guys.
Phil.
Has anyone bought the Arvinode from NPD? I bought the clamp kit for it and there was only 4 regular type clamps and 2 larger band style clamps. After taking the system out I think I need 4 more regular and 2 more band ones. Thought there would be enough to do the whole system. Thanks.
Phil.
In these silicone days, you also see some gorgeous RESTORED pairs!!
Thanks to all for your replies. I was able to find a NOS handle and changed it over. The NOS one only had a hole in one side for the pin, so I had to shorten the pin to make it flush and not slice a finger each time is it used!
Certainly looks much better with the painted letters.
Thanks again.
Phil.
Is it easier to paint the highlighting in or buy another handle? Not sure if I can get an even or crisp finish. I don't want it to look "backyard".
My parking brake handle has the raised "BRAKE" lettering, but is not highlighted in white paint. Is this accepted as correct or does the raised lettering have to be white?
Thanks. Phil.