Posts by C6ZZKGT

  • Do you want your old Account back?

    You can do a search on this site for your forum name as it may bring up your former handle.

    -Fred-

  • Back Again....Again....Again

    Rene, Welcome back as I too am glad to see this site going again. It has been back up since March 2019. Your email suggestion is a good one and Niko had already planned on sending emails to former users of the site and did that yesterday with a good response rate.

    -Fred-

  • Used 289 Carburetor Spacer Plate

    Here is an Ebay auction for a used Hipo 289 carburetor spacer by Ebay member "1970grayvette" with a Buy-It-Now of $42.95 or make offer:

    Payment due in 2 days unless other arrangements are made before hand.

    SHIPPING QUOTE- is for the 48 States- Elsewhere may cost more.



    Occasionally I make mistakes. If you have a problem with an item, please let me know BEFORE you leave negative/neutral, and I will do my best to make it right by you.

    This is a factory OEM carb spacer for a 1964-1969 Ford 289/302/351. The part number is C4OE-9A589. It is old, used, and needs some cleaning- but in good usable shape! see pics.

    https://www.ebay.com/itm/1964-1965-…m4383.l4275.c10

    -Fred-

  • Used C3OE Harmonic Balancer

    Quote from C6ZZKGT

    Here is an Ebay auction for a used C3OE Hipo harmonic balancer by Ebay member "papajoe5557" with a Buy-It-Now of $399.99 or make offer:

    VINTAGE ORIGINAL C30E 289 HIPO K CODE AC COBRA HARMONIC BALANCER. SOME HAMMER MARKS BUT WILL WORK FINE. VERY RARE HARD TO FIND PART

    https://www.ebay.com/itm/1240484328…mMakeTrack=true

    -Fred-

    This used C3OE Hipo harmonic balancer sold January 20, 2020 on Ebay for $399.99.

    -Fred-

  • Used 289 Carburetor Spacer Plate

    This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

    https://www.ebay.com/itm/1538039685…em=153803968517

    -Fred-

  • Used 289 Carburetor Spacer Plate

    Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "magmustangs" with a starting bid of $99.00:

    1964-1969 Ford Mustang, GT, GTA, GT/CS, Mach 1, Grande, Shelby GT350, Falcon, Fairlane, Torino, Ranchero, Mercury Cougar, XR7, Eliminator, Montego, Comet, Cyclone. ORIGINAL 4V CARBURETOR SPACER For 289-HIPO-302-351W Engine. 1" HEIGHT. This is an ORIGINAL FORD PART. Casting Number C4OE-9A589-A and (FoMoCo). Removed from a 65 Mustang GT Fastback with 289 4V Motor. This Spacer is in Great Original Condition. It is Clean and Straight. Has a Natural Metal Finish and Looks Great. Smooth Gasket Surfaces. No heavy Build-Up on the inside. Has a Good PCV Port Tube. Not clogged. No Cracks. No rust or corrosion. Overall, this is a Great Original 4V Carburetor Spacer. Please email with questions. 100719-2 WE HAVE AN EBAY STORE WITH THOUSANDS OF ORIGINAL FORD PARTS. CHECK IT OUT.

    https://www.ebay.com/itm/1964-…831f13:g:hrIAAOSw1Txdm6uf

    -Fred-

    This used Hipo 289 carburetor spacer received no bids by January 20, 2020 and therefore did NOT sell.

    -Fred-

  • Another Hello from Germany

    I had one of those four known 66 Hipo T-5 GT convertibles for a few years. It is dark Ivy Green with black luxury (pony) interior. As I understand it is now in a museum in Switzerland. I regret having sold it as it too had its original drive train. The downside to the Kar when I bought it was the severe rust issues. I did replace panels with mostly NOS parts at the time and it came out good.

    I am happy for you that you have such a time capsule of a Kar.

    -Fred-

  • Car capsule

    I have several customers of mine that use them successfully.

    -Fred-

  • New PDF Edition of "Mustang & Ford Small Block V8, 1962-1969"

    Quote from bobmannel

    The is only one edition of the book. Yes, there are mistakes in the book. Nothing too serious, but bothersome. For example, HiPo cranks were not stamped with hardness markings. They were visually inspected for nodularity -- hence the polished area on the early HiPo cranks. Also, C3AE-E heads are not HiPo heads. The PDF Edition has all the corrections incorporated. Plus, if new errors are discovered, new PDFs are posted, which anyone who has purchased the PDF Edition can download and replace that file for free. Details are on the website.

    Bob,

    As I recall, your book represents 17 years of research on your part putting it together. Am I correct here? The printed books used to come with a separate correction sheet. Do they still come with one?

    On another subject, I am sure that Bob meant to type C5AE-E for the heads above and not C3AE-E. I chose not to correct it without your knowledge.

    -Fred-

  • Correct PCV part number for Feb 66 K-Code?

    The C5AZ 6A666 A and the C5AZ 6A666 A1 are the same part. This is the correct valve and I have a few NOS ones of these and I will get a better look at them when I return on Wednesday. I have seen the number with the A1 suffix on the Ford box but the actual part number is with the suffix A only. There is really not a Ford part number C5AZ 6A666 A1, only the C5AZ 6A666 A.

    -Fred-

  • 6F09K337758 on Ebay

    This Kar received no bids by January 20, 2020 and therefore did NOT sell.

    -Fred-

  • Used FoMoCo Weber Intake Manifold

    Here is an Ebay auction for a used FoMoCo Weber intake manifold by Ebay member "gs7shelby" with a starting bid of $2,500.00:

    This is a 289-302 Ford Weber Intake manifold produced by the Buddy Bar Casting Co. for FoMoCo, part number C6AE 9425-A. It is in excellent condition and has never been repaired, which means no heli-coils, no re-welding, no corrosion, no cracks. The intake has "Buddy Bar Casting" on the bottom and "FoMoCo", "C6AE 9425-A", "SK36852" cast into the top of the manifold. This is a very clean original intake manifold! This particular intake is not reproduced.

    Please check out my other auctions. Please ask any questions before bidding. The intake will be insured when shipped. You can call or text me at 6026940168 George. Thank you!


    https://www.ebay.com/itm/WEBER…513a61:g:f7UAAOSwxphbFJgu

    -Fred-

    This used FoMoCo Weber intake manifold is back on Ebay again with a new higher starting bid of $2,750.00:

    https://www.ebay.com/itm/1435074575…em=143507457529

    -Fred-

  • Used 289 Carburetor Spacer Plate

    This used Hipo 289 carburetor spacer without PCV is back on Ebay again with no changes:

    https://www.ebay.com/itm/2742170623…em=274217062320

    -Fred-

  • Used 289 Carburetor Spacer Plate

    Quote from C6ZZKGT

    Here is an Ebay auction for a used Hipo 289 carburetor spacer without PCV by Ebay member "1943ninny" with a starting bid of $49.99:

    ORIGINAL 1964 1965 1966 MUSTANG SHELBY GT 350 289 HIPO CARB SPACER NO VAC PORT. Condition is Used. Shipped with USPS First Class Package.

    https://www.ebay.com/itm/ORIGINAL-1…yoAAOSwpXBeHP9s

    -Fred-

    This used Hipo 289 carburetor spacer without PCV received no bids by January 20, 2020 and therefore did NOT sell.

    -Fred-

  • Used 65 Early 66 Engine Frame Bracket

    This pair of used 65 early 66 engine frame mount brackets are back on Ebay again with no changes:

    https://www.ebay.com/itm/1640406867…em=164040686797

    --Fred-

  • Used 65 Early 66 Engine Frame Bracket

    This pair of used 65 early 66 engine frame mount brackets received no bids by January 20, 2020 and therefore did NOT sell.

    -Fred-

  • NOS C5ZZ 16228 B Hipo Fender Emblems

    Here is an Ebay auction for a pair of NOS C5ZZ 16228 B Hipo fender emblems by Ebay member "cobranda" with a starting bid of $100.00:

    1964 1/2 - 1966 NOS MUSTANG

    (FITS ALL MODELS & ALL BODIES)

    289 HIPO FRONT FENDER EMBLEM PLATES

    2-PIECES

    NOS FORD PART#:

    ONE

    C5ZZ-16228-B

    EMBLEM

    W,ATTG PARTS

    2 BRAND NEW NOS FORD EMBLEM PLATES: 64 1/2-66 MUSTANG

    289 HIPO FRONT FENDER EMBLEM PLATES, EACH in their own

    NOS FORD WHITE & BLUE BOXES

    SOLD AS 2-PIECES / 2-EMBLEM PLATES

    THESE ARE the HIPO PLATES

    EACH NOS FORD MUSTANG HIPO PLATE will INSTALL:

    LEFT to RIGHT FENDERS - UNIVERSALLY

    THESE NOS EMBLEM PLATES, will INSTALL onto the FENDER 1ST, BEFORE you INSTALL the 289 BADGE

    289 EMBLEM "NOT" INCLUDED

    EACH NOS FORD HIPO EMBLEM, INCLUDES MOUNTING HARDWARE

    MOUNTING BARREL NUTS

    https://www.ebay.com/itm/1964-…bc5912:g:GOoAAOSwdOxeCiCy

    -Fred-

    This pair of NOS C5ZZ 16228 B Hipo fender emblems are back on Ebay again with no changes:

    https://www.ebay.com/itm/3334867197…em=333486719783

    -Fred-