Posts by C6ZZKGT

    Here is an Ebay auction for a used Motorcraft Hipo distributor by Ebay member "oldiron36" with a starting bid of $150.00:

    I bought this in the 90's for a project that never came through, now it is time to clean out the garage. This is a 289 HiPo mechanical advance distributor. I never had it on an engine, so I can't say it does work, but it looks to be in great condition. The shaft turns free with only the drag from the points. Looks to have new points in it (I seem to remember buying new ones for it). It has been painted aluminum (not by me).

    https://www.ebay.com/itm/289-HiPo-m…NkAAOSwIM5ePwy6

    -Fred-

    This used Motorcraft Hipo distributor sold February 15, 2020 on Ebay for $188.00 with 5 bids from 5 bidders.

    -Fred-

    The listing for this used C4DR toploader tail housing was ended by the seller February 15, 2020 with the following explanation "This listing was ended by the seller because the item is no longer available".

    -Fred-

    The Buy-It-Now price on this cable has been reduced again to $129.95.

    -Fred-

    This NOS crankshaft washer was ended by the seller February 15, 2020 with the following explanation "This listing was ended by the seller because the item is no longer available".

    -Fred

    Here is an Ebay auction for a rebuilt C7ZZ 7563 B Hipo pressure plate by Ebay member "tarheelmark698" with a Buy-It-Now of $275.00 or make offer:

    1969-70 Ford Mustang Boss302 10 1/2” Clutch Pressure Plate C7ZZ-7563-B Reman.. Condition is Remanufactured. Also fits 1967 HIPO. Email me any questions Thanks Mark.

    https://www.ebay.com/itm/1969-70-Fo…9AAAOSwiS9d6tUG

    -Fred-

    This is the correct Ford replacement for the earlier Hipo 289 pressure plate.

    -Fred-

    Here is an Ebay auction for a used C4DR toploader tail housing by Ebay member "nsboyd1210" with a Buy-It-Now of $225.00:

    For sale is a 1964-1/2 to 1965 Ford Mustang Falcon 4-speed toploader transmission tailhousing that is drilled for the Mustang. Many years ago I cleaned and painted it and installed a new bushing and seal. It needs to be cleaned and painted again. C4DR-7A040 A

    https://www.ebay.com/itm/1964-1965-…McAAOSw3cVeRebP

    -Fred-

    The listing for this used C5OE Hipo harmonic balancer was "is no longer available" is back on Ebay again with a starting bid of $199.00 and a Buy-It-Now of $399.99:

    https://www.ebay.com/itm/202904514067?ul_noapp=true

    -Fred-

    This NOS D1AZ 12A132 A dual point conversion kit received no bids by February 14, 2020 and therefore did NOT sell.

    -Fred-

    This pair of used C7ZE heads sold February 13, 2020 on Ebay for $2,500.00.

    -Fred-

    This 65 Mustang Koupe Poppy Red with black standard interior received no bids by February 14, 2020 and therefore did NOT sell.

    -Fred-

    Here is an Ebay auction for a set of used Tri Power carburetors by Ebay member "brownlee5212" with a starting bid of $0.99:

    Up For Auction are a set of Ford Small Block Tri Power Carbs. Part # C4AF-9510-V FRONT & REAR C4AF-9510-U CENTER. These are from a large Vintage Ford Speed Parts Estate and have been in a basement since the 1970's and other than being dirty they are in great shape.

    https://www.ebay.com/itm/1841587759…=STRK:MEBIDX:IT

    -Fred-

    This set of used Tri Power carburetors sold February 13, 2020 on Ebay for $910.00 with 25 bids from 9 bidders.

    -Fred-

    This 65 K code Koupe is back on Ebay again with no changes:

    https://www.ebay.com/itm/2646331923…em=264633192375

    -Fred-

    Here is a 65 K code Koupe listed on Ebay by seller "matt1964mustang" with a starting bid of $3,900.00:

    1965 mustang coupe rare K Code 289 Hipo four speed. The car is rusty! It has a title, original door tag. The car is a factory 289 hipo car K code Wimbledon White with bright red interior. The car was not a factory GT car. This car is not for the average builder. It will require extensive metal replacement. I do have a 6 cyl body that the some of the factory parts could be used on this car. Structure mainly. This is your chance to own a part of mustang history. Unfortunately the drive train is not with this car but is obtainable with cash and looking. I have found drive trains for three of these cars myself. Swap meets are your friends for HIPO cars! Thank you for looking. The luck winner must put down a 1000 deposit with in 48 hours and contact me with arrangements to pay the remainder.


    Thank you, Matt

    https://www.ebay.com/itm/264625470114?ul_noapp=true

    -Fred-

    This 65 K code Koupe received no bids by February 13, 2020 and therefore did NOT sell.

    -Fred-

    Here is a 66 K code Koupe listed on Ebay by seller "matt1964mustang" with a starting bid of $4,500.00:

    1966 Mustang K Code Coupe. It has rust but is very build able car. It has spent its life in Oklahoma. The car is a 1966 mustang K code 289 HIPO rare Ivy green metallic with black vinyl roof. The roof is in great shape. The rearend of the car is it’s original 9” which is worth 2500 in its self. The motor and transmission are not original to the car or HIPo. The motor parts and transmission for Hipo cars can still be found at swap meets. I have assembled three of them through eBay and swap meets. Happy hunting. This is a chance to own a rare piece of Mustang history. There were a lot of 66 mustangs but not 66 k code mustangs. The luck winner is required to make a 1000 deposit with in 48 hours and make contact with me to discuss final payment/shipping.


    Good luck bidding, Matt

    https://www.ebay.com/itm/264625492220?ul_noapp=true

    -Fred-

    This 66 K code Koupe received no bids by February 13, 2020 and therefore did NOT sell.

    -Fred-