289 HIPO FORD MUSTANG SHELBY RAM BOX 4V ALUMINUM INTAKE

Here is an Ebay auction for a used SHELBY 4V Ram Box intake manifold by Ebay member "brandongokart" with a Buy-It-Now of $4,495.00:

260 289 HIPO FORD MUSTANG SHELBY COBRA RAM BOX 4V ALUMNUM INTAKE NICE Rare 302 | eBay

-Fred-

Here is another Ebay auction for the same used SHELBY 4V Ram Box intake manifold by Ebay member "brandongokart" but with a starting bid of $3,995.95 instead of a Buy-It-Now:

Here is one of the rarest Shelby intakes. And one of the cleanest ones I’ve ever seen. This is a very rare intake to start with but this one is a single 4 carb set up. Almost unheard of. As you can see in the last picture i have a 2x4 set up on my car. Really an amazing intake. Chances are if you have ever seen one it has been a 2x4 like mine. Very cool intake! Please feel free to ask any questions 518848zero314

Thanks!

260 289 HIPO FORD MUSTANG SHELBY COBRA RAM BOX 4V ALUMNUM INTAKE NICE Rare 302 | eBay

-Fred-

Quote from C6ZZKGT

Here is another Ebay auction for the same used SHELBY 4V Ram Box intake manifold by Ebay member "brandongokart" but with a starting bid of $3,995.95 instead of a Buy-It-Now:

Here is one of the rarest Shelby intakes. And one of the cleanest ones I’ve ever seen. This is a very rare intake to start with but this one is a single 4 carb set up. Almost unheard of. As you can see in the last picture i have a 2x4 set up on my car. Really an amazing intake. Chances are if you have ever seen one it has been a 2x4 like mine. Very cool intake! Please feel free to ask any questions 518848zero314

Thanks!

260 289 HIPO FORD MUSTANG SHELBY COBRA RAM BOX 4V ALUMNUM INTAKE NICE Rare 302 | eBay

-Fred-

This used SHELBY 4V Ram Box intake manifold received no bids by October 3, 2021 and therefore did NOT sell.

-Fred-

Here is an Ebay auction for a used SHELBY 4V Ram Box intake manifold by Ebay member "arbez.nation" with a starting bid of $0.99:

SHELBY BOX ALUMINUM 4V INTAKE MANIFOLD - BUDDY BAR - SB FORD 289 302 - VERY RARE | eBay

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used SHELBY 4V Ram Box intake manifold by Ebay member "arbez.nation" with a starting bid of $0.99:

SHELBY BOX ALUMINUM 4V INTAKE - BUDDY BAR - SMALL BLOCK FORD 289 302 - VERY RARE SHELBY LETTERED - BUDDY BAR CAST UNDERNEATH - NO OTHER CASTING NUMBERS OR MARKINGS DAMAGED - CRACKED TOP - TOP DOESN'T SIT FLUSH WHERE THE CRACK IS - BROKEN BOLT - SEE PICTURES NO BOLTS - YOU WILL RECEIVE IT EXACTLY AS PICTURED I PURCHASED THIS WITH A BUNCH OF PERFORMANCE PARTS BACK IN 1978 BECAUSE OF THE CRACKED TOP I PUT IT ON A SHELF WHERE IT HAS REMAINED FOR THE LAST 43 YEARS PICTURED EXACTLY AS I RECEIVED IT BACK IN 1978 IT IS JUST WANTING FOR SOMEONE WITH A LITTLE TIG WELDING/ALUMINUM SKILLS TO BRING HER BACK VERY UNCOMMON MANIFOLD - YOU RARELY SEE THESE FOR SALE SOLD AS-IS - PLEASE ASK ANY & ALL QUESTIONS BEFORE BIDDING CONTINENTAL US BIDDERS ONLY - PLEASE BUYER PAYS A FLAT $75.00 FEE FOR SHIPPING - INSURANCE OPTIONAL AT BUYERS EXPENSE SHIPPING VIA UPS GROUND - FREE LOCAL PICKUP THANKS FOR LOOKING

SHELBY BOX ALUMINUM 4V INTAKE MANIFOLD - BUDDY BAR - SB FORD 289 302 - VERY RARE | eBay

-Fred-

Display More

This used SHELBY 4V Ram Box intake manifold sold October 10, 2021 on Ebay for $2,100.00 with 30 bids from 9 bidders.

-Fred-

Here is an Ebay auction for a used SHELBY 4V Ram Box intake manifold top only by Ebay member "brandongokart" with a starting bid of $1,250.00:

260 289 HIPO FORD MUSTANG SHELBY COBRA RAM BOX 4V ALUMNUM INTAKE TOP NICE 302 | eBay

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used SHELBY 4V Ram Box intake manifold top only by Ebay member "brandongokart" with a starting bid of $1,250.00:

This is just the top hat of the intake, good for a guy who wants to go from 2x4 too the rare single 4. Very cool intake! Please feel free to ask any questions 518848zero314 Thanks!

260 289 HIPO FORD MUSTANG SHELBY COBRA RAM BOX 4V ALUMNUM INTAKE TOP NICE 302 | eBay

-Fred-

This used SHELBY 4V Ram Box intake manifold top only sold March 12, 2022 on Ebay for $1,250.00 with 1 bid from 1 bidder.

-Fred-

Here is an Ebay auction for an NOS SHELBY 4V Ram Box intake manifold by Ebay member "jollyroge" with a starting bid of $0.99:

NOS Shelby Ram Box 289 302 intake manifold Cobra GT350 Mustang. Here is a rare intake manifold. This was developed for Shelby in the late 60’s by George Spears from Shelby/ Spearco . It was Ford’s answer to the Chevrolet “Smokey Ram” box manifold that was developed for the 302 Chevy Z-28 . This was available in the 1968-69 Shelby parts catalogs and could be acquired with either a single 4 bbl top plate or a 2 x4 bbl top plate. When you take the lid off you can see all the developmental work that went into this to make the runners long and equal length for a ram affect without a tall Tunnel port style intake runner. This made for a broad useful powerband and could fit under the hood of most any car application. This manifold is new and has never been installed or used. No special gaskets or distributor are needed and it will bolt into a stock engine application. A very rare piece that I have personally used on some of my engines in the past. It works very well. Enclosed is a picture and description from the 1969 Shelby parts catalog describing the intake. The ultimate intake manifold for your small block Ford. Will fit all 260-289 302 and any 8.200 “ deck Ford small block engine including 331” or 347” stroker motors. Perfect in every way ready to bolt on or put in your collection . You don’t see one these for sale very often and never NOS . Winner pays actual UPOS shipping charges . Good luck bidding !

NOS Shelby Ram Box 289 302 intake manifold Cobra GT350 Mustang | eBay

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for an NOS SHELBY 4V Ram Box intake manifold by Ebay member "jollyroge" with a starting bid of $0.99:

NOS Shelby Ram Box 289 302 intake manifold Cobra GT350 Mustang. Here is a rare intake manifold. This was developed for Shelby in the late 60’s by George Spears from Shelby/ Spearco . It was Ford’s answer to the Chevrolet “Smokey Ram” box manifold that was developed for the 302 Chevy Z-28 . This was available in the 1968-69 Shelby parts catalogs and could be acquired with either a single 4 bbl top plate or a 2 x4 bbl top plate. When you take the lid off you can see all the developmental work that went into this to make the runners long and equal length for a ram affect without a tall Tunnel port style intake runner. This made for a broad useful powerband and could fit under the hood of most any car application. This manifold is new and has never been installed or used. No special gaskets or distributor are needed and it will bolt into a stock engine application. A very rare piece that I have personally used on some of my engines in the past. It works very well. Enclosed is a picture and description from the 1969 Shelby parts catalog describing the intake. The ultimate intake manifold for your small block Ford. Will fit all 260-289 302 and any 8.200 “ deck Ford small block engine including 331” or 347” stroker motors. Perfect in every way ready to bolt on or put in your collection . You don’t see one these for sale very often and never NOS . Winner pays actual UPOS shipping charges . Good luck bidding !

NOS Shelby Ram Box 289 302 intake manifold Cobra GT350 Mustang | eBay

-Fred-

This NOS SHELBY 4V Ram Box intake manifold sold February 4, 2023 on Ebay for $2,025.00 with 21 bids from 14 bidders.

-Fred-

Here is an Ebay auction for an NOS SHELBY 4V Ram Box intake manifold with all related mounting pieces by Ebay member "sprystang" with a Buy-It-Now of $9,500.00 or make offer:

Up For Sale is a Complete Upgrade Package for your Shelby Cobra or Early Ford Mustang or Hot Rod. Some of these parts are extremely *Rare and very hard to find. These parts were all purchased in the early ‘70’s and never used. The Intake, oil pan, valve covers and magneto are all NOS. Never ran. See pictures for details or PM me and I can get you pictures of whatever you need. So the parts are as follows.

1. Shelby Ram Box Manifold for Small Block Ford 221-260-289-302. SIngle Quad For use with 850 cfm carb. Intake is originally made by Buddy Barr as cast on the bottom. 1 of Less then 100 intakes ever made, actually probably 50, since the other 50 were the dual quad! It is new, old stock. Never ran, and it shows. Very Rare, and if they turn up for sale, they are usually cracked and repaired. This one is perfect!

2.Pair of Rare Hard to find Original Mooneyes Valve covers, not the cheap repos. These are finned and have NN55 cast into the bottom, with original chrome breathers.

3. Original COBRA finned oil pan. I believe this is the 6.5 Quart version. No cracks or broken fins, N.O.S.

4. Original 260 ALuminum TIming Chain Cover and Water pump with Oil fill, must be used with this intake and valve cover combo. It is in very good shape.

5. Aluminum Remote Oil filter adapter with fittings. Vintage and in great shape

6. New Vertex Magneto Ronco with original Box. Magneto needs cleaned on the outside as it was sitting on a shelf. But shows no signs of ever being ran. Has 30067 stamped on tag.

7. Original 289 HI-PO K Code Distributor. Part Number C50F 12127-E Date code 6H26 I believe.

Check out all the pictures and ask plenty of questions. I prefer buyer picks up in person or arrange transportation. I would hate to lose these parts in shipping them.

*Ultimate* Shelby Cobra SBF NOS *Rare* Ram Box Intake - Cobra Oil Pan - Vertex | eBay

-Fred-