NOS D1AZ 12A132 A dual point conversion kit

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $60.00 and a Buy-It-Now of $80.00:

!! Please take your time and look and read description fully !!

**This is the Christmas Early Bird Special**                             

You are bidding on (1) New 289 / 427 HiPo service replacement (K) & (W) code dual point mechanical /

centrifugal distributor breaker plate & spacer. #D1AZ-12A132-A supersede #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! Comes complete as seen in pictures. Two piece steel plate & Ford Motorcraft original paper package. This is 100% correct for the *(K) code 289 HiPo dual point distributor part number C5OF-12127-E & *(W) code 427 HiPo dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane mechanical advance distributors. Also will work 100% as a conversion kit for any of these Ford V8 engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor housing: FoMoCo, Autolite & Motorcraft. Correct fit for the 1964 to 1974 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with a Ford V8 engines & Ford V8 distributors.

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by December 1, 2021 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with higher starting bid of $85.00 and a higher Buy-It-Now of $110.50:

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $60.00 and a Buy-It-Now of $80.00:

!! Please take your time and look and read description fully !!

**This is the Christmas Early Bird Special**                             

You are bidding on (1) New 289 / 427 HiPo service replacement (K) & (W) code dual point mechanical /

centrifugal distributor breaker plate & spacer. #D1AZ-12A132-A supersede #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! Comes complete as seen in pictures. Two piece steel plate & Ford Motorcraft original paper package. This is 100% correct for the *(K) code 289 HiPo dual point distributor part number C5OF-12127-E & *(W) code 427 HiPo dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane mechanical advance distributors. Also will work 100% as a conversion kit for any of these Ford V8 engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor housing: FoMoCo, Autolite & Motorcraft. Correct fit for the 1964 to 1974 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with a Ford V8 engines & Ford V8 distributors.

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by December 1, 2021 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with higher starting bid of $85.00 and a higher Buy-It-Now of $110.50:

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by December 27, 2021 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $60.00 and a Buy-It-Now of $80.00:

!! Please take your time and look and read description fully !!

**This is the Christmas Early Bird Special**                             

You are bidding on (1) New 289 / 427 HiPo service replacement (K) & (W) code dual point mechanical /

centrifugal distributor breaker plate & spacer. #D1AZ-12A132-A supersede #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! Comes complete as seen in pictures. Two piece steel plate & Ford Motorcraft original paper package. This is 100% correct for the *(K) code 289 HiPo dual point distributor part number C5OF-12127-E & *(W) code 427 HiPo dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane mechanical advance distributors. Also will work 100% as a conversion kit for any of these Ford V8 engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor housing: FoMoCo, Autolite & Motorcraft. Correct fit for the 1964 to 1974 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with a Ford V8 engines & Ford V8 distributors.

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by December 1, 2021 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with higher starting bid of $85.00 and a higher Buy-It-Now of $110.50:

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by December 27, 2021 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with lower starting bid of $70.00 and a lower Buy-It-Now of $95.00:

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $60.00 and a Buy-It-Now of $80.00:

!! Please take your time and look and read description fully !!

**This is the Christmas Early Bird Special**                             

You are bidding on (1) New 289 / 427 HiPo service replacement (K) & (W) code dual point mechanical /

centrifugal distributor breaker plate & spacer. #D1AZ-12A132-A supersede #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! Comes complete as seen in pictures. Two piece steel plate & Ford Motorcraft original paper package. This is 100% correct for the *(K) code 289 HiPo dual point distributor part number C5OF-12127-E & *(W) code 427 HiPo dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane mechanical advance distributors. Also will work 100% as a conversion kit for any of these Ford V8 engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor housing: FoMoCo, Autolite & Motorcraft. Correct fit for the 1964 to 1974 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with a Ford V8 engines & Ford V8 distributors.

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by December 1, 2021 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with higher starting bid of $85.00 and a higher Buy-It-Now of $110.50:

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by December 27, 2021 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with lower starting bid of $70.00 and a lower Buy-It-Now of $95.00:

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by January 1, 2022 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $60.00 and a Buy-It-Now of $80.00:

!! Please take your time and look and read description fully !!

**This is the Christmas Early Bird Special**                             

You are bidding on (1) New 289 / 427 HiPo service replacement (K) & (W) code dual point mechanical /

centrifugal distributor breaker plate & spacer. #D1AZ-12A132-A supersede #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! Comes complete as seen in pictures. Two piece steel plate & Ford Motorcraft original paper package. This is 100% correct for the *(K) code 289 HiPo dual point distributor part number C5OF-12127-E & *(W) code 427 HiPo dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane mechanical advance distributors. Also will work 100% as a conversion kit for any of these Ford V8 engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor housing: FoMoCo, Autolite & Motorcraft. Correct fit for the 1964 to 1974 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with a Ford V8 engines & Ford V8 distributors.

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by December 1, 2021 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with higher starting bid of $85.00 and a higher Buy-It-Now of $110.50:

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by December 27, 2021 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with lower starting bid of $70.00 and a lower Buy-It-Now of $95.00:

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by January 1, 2022 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with higher starting bid of $95.00 and a higher Buy-It-Now of $125.00:

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $60.00 and a Buy-It-Now of $80.00:

!! Please take your time and look and read description fully !!

**This is the Christmas Early Bird Special**                             

You are bidding on (1) New 289 / 427 HiPo service replacement (K) & (W) code dual point mechanical /

centrifugal distributor breaker plate & spacer. #D1AZ-12A132-A supersede #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! Comes complete as seen in pictures. Two piece steel plate & Ford Motorcraft original paper package. This is 100% correct for the *(K) code 289 HiPo dual point distributor part number C5OF-12127-E & *(W) code 427 HiPo dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane mechanical advance distributors. Also will work 100% as a conversion kit for any of these Ford V8 engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor housing: FoMoCo, Autolite & Motorcraft. Correct fit for the 1964 to 1974 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with a Ford V8 engines & Ford V8 distributors.

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by December 1, 2021 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with higher starting bid of $85.00 and a higher Buy-It-Now of $110.50:

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by December 27, 2021 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with lower starting bid of $70.00 and a lower Buy-It-Now of $95.00:

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by January 1, 2022 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with higher starting bid of $95.00 and a higher Buy-It-Now of $125.00:

289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit sold January 24, 2022 on Ebay for $95.00.

-Fred-

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

!! Please take your time looking & read description fully !!

!! Very easy to install !!

You are bidding on a NOS service replacement dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS Ford service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper & the Motorcraft paper package. *Not the 3 Motorcraft boxes* This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

NOS 289 HiPo dual point distributor breaker plate Kit 390 427 428 429 351 302 | eBay

-Fred-

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

!! Please take your time looking & read description fully !!

!! Very easy to install !!

You are bidding on a NOS service replacement dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS Ford service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper & the Motorcraft paper package. *Not the 3 Motorcraft boxes* This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

NOS 289 HiPo dual point distributor breaker plate Kit 390 427 428 429 351 302 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by November 27, 2022 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

!! Please take your time looking & read description fully !!

!! Very easy to install !!

You are bidding on a NOS service replacement dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS Ford service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper & the Motorcraft paper package. *Not the 3 Motorcraft boxes* This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

NOS 289 HiPo dual point distributor breaker plate Kit 390 427 428 429 351 302 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by November 27, 2022 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with the same starting bid of $150.00 and the same Buy-It-Now of $195.00:

NOS 289 HiPo dual point distributor breaker plate Kit 390 427 428 429 351 302 | eBay

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

!! Please take your time looking & read description fully !!

!! Very easy to install !!

You are bidding on a NOS service replacement dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS Ford service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper & the Motorcraft paper package. *Not the 3 Motorcraft boxes* This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

NOS 289 HiPo dual point distributor breaker plate Kit 390 427 428 429 351 302 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by November 27, 2022 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with the same starting bid of $150.00 and the same Buy-It-Now of $195.00:

NOS 289 HiPo dual point distributor breaker plate Kit 390 427 428 429 351 302 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by December 18, 2022 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

!! Please take your time looking & read description fully !!

!! Very easy to install !!

You are bidding on a NOS service replacement dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS Ford service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper & the Motorcraft paper package. *Not the 3 Motorcraft boxes* This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

NOS 289 HiPo dual point distributor breaker plate Kit 390 427 428 429 351 302 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by November 27, 2022 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with the same starting bid of $150.00 and the same Buy-It-Now of $195.00:

NOS 289 HiPo dual point distributor breaker plate Kit 390 427 428 429 351 302 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by December 18, 2022 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with a new higher starting bid of $175.00 and a new higher Buy-It-Now of $227.50:

NOS 289 HiPo dual point distributor breaker plate Kit 390 427 428 429 351 302 | eBay

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

!! Please take your time looking & read description fully !!

!! Very easy to install !!

You are bidding on a NOS service replacement dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS Ford service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper & the Motorcraft paper package. *Not the 3 Motorcraft boxes* This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

NOS 289 HiPo dual point distributor breaker plate Kit 390 427 428 429 351 302 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by November 27, 2022 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with the same starting bid of $150.00 and the same Buy-It-Now of $195.00:

NOS 289 HiPo dual point distributor breaker plate Kit 390 427 428 429 351 302 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by December 18, 2022 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with a new higher starting bid of $175.00 and a new higher Buy-It-Now of $227.50:

NOS 289 HiPo dual point distributor breaker plate Kit 390 427 428 429 351 302 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by January 8, 2023 and therefore did NOT sell.

-Fred-

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with a new lower starting bid of $125.00 and a new lower Buy-It-Now of $162.50:

!! Please take your time looking & read description fully !!

! Very easy to install !!

You are bidding on a NOS service replacement dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS USA made service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper but **Not Motorcraft paper package **Not the 3 Motorcraft boxes** This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

289 HiPo dual point distributor D1AZ-12A132-A breaker plate Kit 427 428 351 | eBay

-Fred-

Quote from C6ZZKGT

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with a new lower starting bid of $125.00 and a new lower Buy-It-Now of $162.50:

!! Please take your time looking & read description fully !!

! Very easy to install !!

You are bidding on a NOS service replacement dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS USA made service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper but **Not Motorcraft paper package **Not the 3 Motorcraft boxes** This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

289 HiPo dual point distributor D1AZ-12A132-A breaker plate Kit 427 428 351 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit sold July 18, 2023 on Ebay for $162.50 with 2 bids from 2 bidders.

-Fred-

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

!! Please take your time looking & read description fully !!

!! Very easy to install !!

You are bidding on a NOS service replacement dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS USA made service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper & the Motorcraft paper package. **Not the 3 Motorcraft boxes** This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

289 HiPo dual point distributor D1AZ-12A132-A breaker plate Kit 427 428 351 | eBay

-Fred-

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

!! Please take your time looking & read description fully !!

!! Very easy to install !!

You are bidding on a NOS service replacement dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS USA made service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper & the Motorcraft paper package. **Not the 3 Motorcraft boxes** This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

289 HiPo dual point distributor D1AZ-12A132-A breaker plate Kit 427 428 351 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by August 3, 2023 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

!! Please take your time looking & read description fully !!

!! Very easy to install !!

You are bidding on a NOS service replacement dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS USA made service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper & the Motorcraft paper package. **Not the 3 Motorcraft boxes** This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

289 HiPo dual point distributor D1AZ-12A132-A breaker plate Kit 427 428 351 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by August 3, 2023 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with the same starting bid of $150.00 and the same Buy-It-Now of $195.00:

289 HiPo dual point distributor D1AZ-12A132-A breaker plate Kit 427 428 351 | eBay

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

!! Please take your time looking & read description fully !!

!! Very easy to install !!

You are bidding on a NOS service replacement dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS USA made service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper & the Motorcraft paper package. **Not the 3 Motorcraft boxes** This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

289 HiPo dual point distributor D1AZ-12A132-A breaker plate Kit 427 428 351 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by August 3, 2023 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with the same starting bid of $150.00 and the same Buy-It-Now of $195.00:

289 HiPo dual point distributor D1AZ-12A132-A breaker plate Kit 427 428 351 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by August 11, 2023 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

!! Please take your time looking & read description fully !!

!! Very easy to install !!

You are bidding on a NOS service replacement dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS USA made service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper & the Motorcraft paper package. **Not the 3 Motorcraft boxes** This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

289 HiPo dual point distributor D1AZ-12A132-A breaker plate Kit 427 428 351 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by August 3, 2023 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with the same starting bid of $150.00 and the same Buy-It-Now of $195.00:

289 HiPo dual point distributor D1AZ-12A132-A breaker plate Kit 427 428 351 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by August 11, 2023 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with a much higher starting bid of $195.00 and a much higher Buy-It-Now of $253.50:

NOS/New 289 HiPo dual point breaker plate kit C9AZ-12151-B | eBay

-Fred-

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $115.00 and a Buy-It-Now of $149.50:

!! Please take your time looking & read description fully !!

!! Very easy to install !!

You are bidding on a NOS service replacement HiPo dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package kit comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS USA made service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper & the Motorcraft paper package. **Not the 3 Motorcraft boxes** This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

289 HiPo dual point distributor D1AZ-12A132-A breaker plate Kit 427 428 351 | eBay

-Fred-