Used C8ZE Replacement Harmonic Balancer

C6ZZKGT · December 13, 2021 at 4:27 AM Official Post

This used C8ZE replacement Hipo harmonic balancer received no bids by December 12, 2021 and therefore did NOT sell.

-Fred-

C6ZZKGT · December 13, 2021 at 4:28 AM Official Post

This used C8ZE replacement Hipo harmonic balancer is back on Ebay again with no changes

FORD 289 HiPO HARMONIC BALANCER C8ZE-A SMALL BLOCK FORD 302 SERVICE REPLACEMENT | eBay

-Fred-

C6ZZKGT · December 21, 2021 at 5:11 AM Official Post

This used C8ZE replacement Hipo harmonic balancer received no bids by December 19, 2021 and therefore did NOT sell.

-Fred-

C6ZZKGT · December 21, 2021 at 5:12 AM Official Post

This used C8ZE replacement Hipo harmonic balancer is back on Ebay again with a lower starting bid of $159.95:

FORD 289 HiPO HARMONIC BALANCER C8ZE-A SMALL BLOCK FORD 302 SERVICE REPLACEMENT | eBay

-Fred-

C6ZZKGT · December 21, 2021 at 5:15 AM Official Post

Here is an Ebay auction for a used C8ZE replacement Hipo harmonic balancer by Ebay member "mustangmanbob" with a Buy-It-Now of $265.00:

This is an original Ford 289 HiPo High Performance 289 engine harmonic balancer that was sold as a service replacement for the 1965 - 1967 OEM harmonic balancer.

It is in good shape, cleaned and cast blast grey painted.

FORD 289 HiPO HARMONIC BALANCER C8ZE-A SMALL BLOCK 302 SERVICE REPLACEMENT | eBay

-Fred-

C6ZZKGT · December 27, 2021 at 9:59 PM Official Post

This used C8ZE replacement Hipo harmonic balancer received no bids by December 26, 2021 and therefore did NOT sell.

-Fred-

C6ZZKGT · December 27, 2021 at 10:00 PM Official Post

This used C8ZE replacement Hipo harmonic balancer is back on Ebay again with no changes:

FORD 289 HiPO HARMONIC BALANCER C8ZE-A SMALL BLOCK FORD 302 SERVICE REPLACEMENT | eBay

-Fred-

C6ZZKGT · January 4, 2022 at 3:00 AM Official Post

This used C8ZE replacement Hipo harmonic balancer received no bids by January 2, 2022 and therefore did NOT sell.

-Fred-

C6ZZKGT · January 4, 2022 at 3:02 AM Official Post

This used C8ZE replacement Hipo harmonic balancer is back on Ebay again with no changes:

FORD 289 HiPO HARMONIC BALANCER C8ZE-A SMALL BLOCK FORD 302 SERVICE REPLACEMENT | eBay

-Fred-

C6ZZKGT · January 10, 2022 at 5:26 AM Official Post

This used C8ZE replacement Hipo harmonic balancer received no bids by January 9, 2022 and therefore did NOT sell.

-Fred-

C6ZZKGT · January 10, 2022 at 5:27 AM Official Post

This used C8ZE replacement Hipo harmonic balancer is back on Ebay again with a lower starting bid of $149.95:

FORD 289 HiPO HARMONIC BALANCER C8ZE-A SMALL BLOCK FORD 302 SERVICE REPLACEMENT | eBay

-Fred-

C6ZZKGT · January 17, 2022 at 9:09 PM Official Post

This used C8ZE replacement Hipo harmonic balancer received no bids by January 16, 2022 and therefore did NOT sell.

-Fred-

C6ZZKGT · January 17, 2022 at 9:10 PM Official Post

This used C8ZE replacement Hipo harmonic balancer is back on Ebay again with no changes:

FORD 289 HiPO HARMONIC BALANCER C8ZE-A SMALL BLOCK FORD 302 SERVICE REPLACEMENT | eBay

-Fred-

C6ZZKGT · January 24, 2022 at 8:06 PM Official Post

This used C8ZE replacement Hipo harmonic balancer received no bids by January 23, 2022 and therefore did NOT sell.

-Fred-

C6ZZKGT · January 24, 2022 at 8:07 PM Official Post

This used C8ZE replacement Hipo harmonic balancer is back on Ebay again with no changes:

FORD 289 HiPO HARMONIC BALANCER C8ZE-A SMALL BLOCK FORD 302 SERVICE REPLACEMENT | eBay

-Fred-

C6ZZKGT · January 31, 2022 at 6:17 PM Official Post

This used C8ZE replacement Hipo harmonic balancer received no bids by January 30, 2022 and therefore did NOT sell.

-Fred-

C6ZZKGT · February 19, 2022 at 5:03 PM Official Post

Here is an Ebay auction for a used C8ZE replacement Hipo harmonic balancer by Ebay member "auntiek351" with a Buy-It-Now of $244.44:

This is a good used original Ford Harmonic Balancer for a 1963 1964 1965 1966 1967 Mustang Shelby GT350 Fairlane with a 289 HiPo High Performance Special V8. This is the Ford service balancer with ID number C8ZE-A. It has not been rebalanced and has an excellent seal surface. This has very clear timing marks and has not been altered or damaged. It is clean and ready to install on your engine. Thank-you for looking. (021722)

FORD 289 HIPO HARMONIC BALANCER C8ZE-A SPECIAL HI-PERFORMANCE MUSTANG K CODE | eBay

-Fred-

C6ZZKGT · March 14, 2022 at 6:40 PM Official Post

This used C8ZE replacement Hipo harmonic balancer sold March 13, 2022 on Ebay for $244.44.

-Fred-

C6ZZKGT · March 27, 2022 at 12:56 AM Official Post

Here is an Ebay auction for a used C8ZE replacement Hipo harmonic balancer by Ebay member "1hotvega" with a Buy-It-Now of $300.00 or make offer:

289 K code balancer. very nice never hammered on, no visible wear on the seal area. Rubber a little cracked on the backside, otherwise could pass as NOS.

Ford Mustang 289 K Code HiPo Harmonic Balancer NOS | eBay

-Fred-

C6ZZKGT · April 1, 2022 at 9:08 PM Official Post

Here is an Ebay auction for a used C8ZE replacement Hipo harmonic balancer by Ebay member "tolisto_0" with a Buy-It-Now of $225.00 or make offer:

Mustang / Shelby / Fairlane 289 Hi-Po / K-Code 6-1/2" (6.5-inch) Harmonic Balancer Vibration Damper C8ZE-A C5OE-A. 6-1/2" harmonic balancer C8ZE-A S.D. D9 / C5OZ-6316

{ NOTE: will also fit 302 and 302 strokers - 306, 317, 319, 320, 326, 327, 331, 337, 347, 355, 357 & 363 }

C8ZE-A Mustang / Shelby / Fairlane 289 Hi-Po / 289 K-Code Ford service replacement balancer for the 289 Hi-Po / 289 K-Code motors 0-30 degree timing markings

Hi-Po / K-Code service replacement balancer C8ZE-A looks very similar to original C5OE-A 289 Hi-Po / 289 K-Code balancer except for a few minor differences.

C8ZE-A service replacement has a slight step on the face as compared to the smooth face of the original 289 Hi-Po / 289 K-Code balancer.

Ford Harmonic Balancer - Fits 1963-67 Mustang / Shelby / Fairlane 289 Hi-Po / 289 K-Code: C5OE-A | C5OE-C | C5OZ-6316-C | C8ZE-A S.D. D9 | C8ZE-A S.D. C2

289 Hi-Po / 289 K-Code Harmonic Balancer C8ZE Ford Mustang / Shelby / Fairlane 289 Hi-Po / 289 K-Code

original C5OE-A 289 Hi-Po / 289 K-Code service replacement balancer C8ZE-A looks very similar to original C5OE-A 289 Hi-Po / 289 K-Code balancer except for a few minor differences.

C8ZE-A service replacement has a slight step on the face as compared to the smooth face of the original Hi-Po balancer.

(See pic w/ red arrows on it - not actual part - used for illustration purposes only)

This is the Ford Service Replacement balancer for the 289 Hi-Po / 289 K-Code. It was never used on production engines.

The service replacement balancers for the 289 Hi-Po / 289 K-Code motor had a number cast into them which was C8ZE with an A underneath it.

There would also be a step down in the outer surface where the timing numbers are, as in,

it would go straight back for like an inch & a quarter or so, and then have a little step for the last half inch or so on the end closest to the timing chain cover.

(See pic w/ red arrows on it - not actual part - used for illustration purposes only)

289 "Hi-Po" / 289 "K-Code" harmonic balancer (model C8ZE-A) used for a 289 Hi-Po / 289 K-code FORD Mustang / Shelby / Fairlane with a 289 V-8.

used C8ZE replacement 289 Hi-Po / 289 K-Code harmonic balancer

This is the Ford service replacement for the 289 High Performance / 289 Hi-Po / 289 K-Code FORD Mustang / Shelby / Fairlane engine.

This is a Ford 289 Hi-Po / 289 Hi-Performance / 289 K-Code Crankshaft Damper C5OZ-6316-C.

This item is in good condition please see pictures. This is an authentic Ford assembly line part with minimal signs of age.

Ford 289 Vibration Damper. C8ZE-A part # cast in. Service part, built from 1968 and later.

This is original production part.

It seems Ford used existing C5OE centers to produce the very few balancers needed for AC equipped 289 Hi-Po / K-Code 289 motors in 1967.

By 1968 production, the center casting changed to a C8ZE-A which also became the default service part.

If you try to fit an original 67 A/C crank pulley to the C5OE balancer you will see that it will not fit or will fit so tight as to bind on the outer ring.

The '67 A/C pulley would not fit in the C5OE damper so a new outer ring was made to allow it.

Since this was an alteration to a production part but a very small quantity, the casting number was removed and re-stamped.

Plans were in place for a "Hi-Po 302" for '68 (dropped for the also dropped 302 street tunnel port) manufacturing changed the blueprint to effect the changes.

The casting number was changed to C8ZE to reflect the updated part. Since neither of the intended use engines were produced, the dampers were sold over the counter.

FORD 289 Hi-Po / 289 K-Code Harmonic Balancer C8ZE-A Small Block 302 Service Replacement

This is an original Ford Mustang / Shelby / Fairlane 289 Hi-Po / 289 High Performance / 289 K-Code 289 engine harmonic balancer that was sold as a service replacement for the 1963 - 1967 OEM harmonic balancer.

Ford Mustang / Shelby / Fairlane 289 K-Code / 289 Hi-Po Harmonic Balancer. 289 Hi-Po / 289 K-Code balancer. very nice never hammered on, Rubber a little cracked on the backside.

Mustang Fairlane 289 HiPo KCode Harmonic Balancer Vibration Damper C8ZE-A C5OE-A | eBay

-Fred-

Used C8ZE Replacement Harmonic Balancer

Participate now!

Users Viewing This Thread