Is there any difference between a regular 289 flywheel and a hipo flywheel? I have a new 157 tooth steel flywheel with no markings other than 157 stamped in it that I'd like to use if it will work.
thanks
Is there any difference between a regular 289 flywheel and a hipo flywheel? I have a new 157 tooth steel flywheel with no markings other than 157 stamped in it that I'd like to use if it will work.
thanks
Looking for a black '65 bucket upholstery kit for one seat. I really only need the upper (or back) but will take the whole kit. Please email me at hp289@shaw.ca.
I am looking to sell off my NOS parts as well as a few other items. Please note that I live in southern B.C. Thanks. Brock
-Original Ford Parts Dept microfische monitor and fische for all ford, lincoln, mercury cars and trucks from `65-79. $400
-NOS L/R front fenders, w/boxes- $450 each
-NOS front valance, w/box $195
-NOS `65 glove box lock, w/keys & box $65
-NOS K manifolds C3OE, C40E, K54 dates $550 pr.
-NOS `66 washer pump, w/box $50
-NOS `66 dash pad, w/box black $250
-NOS `65 K motor mount rubbers, large $200 pair
-NOS lights warning kit, w/box $50
-NOS underhood lamp kit, w/box $50
-NOS front bumper, w/box $250
-NOS LH wing window glass carlite Sun-X $100
-repop`66 dash bezel $20
-new `66 front seat upholstry, one bucket, black std $45
more NOS stuff in boxes:
- `66 std gas cap C6ZZ $175
- `69 gas cap C9ZZ-9030-A $175
- `65 Gt/`66 glove box lock $75
- C6OZ-6206081-C lock asy w/chrome bezel, keys $75
- C6ZZ-15A000-A dash mount clock kit $200
- late`65-`66 C5ZZ-18578-A heater switch $75
- `66 grill moulding center cover, very early FoMoCo box $75
- `65-`67 4 speed shifter lever w/lock out $275
<BLOCKQUOTE id=quote><font size=1 face="Verdana" id=quote>quote:<hr height=1 noshade id=quote>
IF you have any left over carpet from doing the fold down just cut it from that
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana" size=2 id=quote>
I don't have any leftovers or old carpet to cut from. They need to have the surge bound edges.
I am looking for the two little pieces that glue to the bottom of the fibreglas 1/4's. Black.
thanks
<BLOCKQUOTE id=quote><font size=1 face="Verdana" id=quote>quote:<hr height=1 noshade id=quote>
I also have a March/65 built KFB California car 5R09K202912 for sale with all ford sheetmetal, silver smoke grey, black std int, disc brakes, rally pac. K motor is gone and has a rebuilt 5 bolt std 289. Original fresh rebuilt VIN stamped HEH-T trans and 9 inch are present. Car is undergoing an engine bay facelift (bare metal to paint)and will be available in a few weeks.
I have owned this car for just over a year now and have over 45K into it so I'm taking a bit of a beating selling it at 37K.
thanks again
Brock
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana" size=2 id=quote>
The `65 is now sold to the person I should have sold the green one to. thanks
<BLOCKQUOTE id=quote><font size=1 face="Verdana" id=quote>quote:<hr height=1 noshade id=quote>
What makes the Ford microfiche reader so unique that it's the only one that can read Ford produced microfiche?
JIM
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana" size=2 id=quote>
Ford microfishe won't work on typical monitors found at places like the library. I bought this setup from a local Ford parts dept years ago.
I am looking to sell off my NOS parts as well as a few other items. Please note that I live in southern B.C. Thanks. Brock
-NOS `66 washer pump, w/box $50
-NOS lights warning kit, w/box $50
-NOS LH wing window glass carlite Sun-X $75
-NOS `66 std gas cap C6ZZ $175
-NOS `69 gas cap C9ZZ-9030-A $175
-NOS `65 glove box lock, w/keys & box $65
-NOS `65 Gt/`66 glove box lock $65
-NOS C6OZ-6206081-C glove box lock asy w/chrome bezel, keys $75
-NOS C6ZZ-15A000-A dash mount clock kit $195
-NOS late`65-`66 C5ZZ-18578-A heater switch $65
-NOS `66 grill moulding center cover, very early FoMoCo box $75
-repop`66 dash bezel $15
-new `66 front seat upholstry, one bucket, black std $45
-Original Ford Parts Dept microfische monitor and fische for all ford, lincoln, mercury cars and trucks from `65-79. $400
Edited by - 1966KGT on 12/04/2009 13:03:27
I have the horse and corral NOS $200 please pm me if anyones interested
I'm sorry for those who have requested shipping quotes. I simply don't have time right now to run around shipping parts as life has gotten complicated for the time being. I'll repost these items at a later date. I thought I could lighten my load as far as getting rid of some things, but like I said, no time. thanks. Brock
List is updated now with prices. I've been very busy and appologize for any delays in responding to your emails. thanks. Brock
I am looking to sell off my NOS parts as well as a few other items. Here is a partial list. Please note that I live in southern B.C.
-Microfische monitor and fische for all ford, lincoln, mercury and trucks from `65-79. This is an original Ford Parts dept setup and is the only monitor that will read Ford microfische. $450
-NOS L/R front fenders- $550 each
-NOS front valance $250
-NOS tail light panel $200
-NOS heater motor with cage (two wire)$225
-NOS `66 GT emblems $50 ea
-NOS `65 glove box lock $75
-NOS K manifolds $675
-NOS `66 washer pump $60
-NOS `66 dash pad, black $300
-NOS `65 K motor mount rubbers, large $200
-NOS park brake warning lamp kit $50
-NOS lights warning kit $50
-NOS underhood lamp kit $50
-NOS front bumper $295
-NOS LH wing window glass carlite Sun-X $100
-original hipo air cleaner lid $125
-original hipo valve covers $100
-set Mex main caps $295
-repop FB interior 1/4 panels $50
-repop`66 dash bezel $20
-new `66 front seat upholstry, one bucket, black std $50
I have a lot more to list but just can't recall all of what I have at the moment. I'll try to come up with a more complete list but for now just email me for more info. thanks. Brock
Edited by - 1966KGT on 07/06/2008 12:27:20
I have the large rubber insulators in NOS if interested.
Brock
I have a March/65 built KFB California car 5R09K202912 for sale with all ford sheetmetal, silver smoke grey, black std int, disc brakes, rally pac. K motor is gone and has a rebuilt 5 bolt std 289. Original fresh rebuilt VIN stamped HEH-T trans and 9 inch are present as well as the original data plate, motor mounts, and K manifolds. Car is undergoing an engine bay facelift (bare metal to paint)and will be available in a few weeks.
I have owned this car for just over a year now and have over 45K into it so I'm taking a bit of a beating selling it at 37K.
thanks
Brock
Edited by - 1966KGT on 07/09/2008 00:56:38
Thanks to all of you for your interest and Marv for the ad space but the car's been sold locally. BTW I also have a March/65 built KFB California car 5R09K202912 for sale with all ford sheetmetal, silver smoke grey, black std int, disc brakes, rally pac. K motor is gone and has a rebuilt 5 bolt std 289. Original fresh rebuilt VIN stamped HEH-T trans and 9 inch are present. Car is undergoing an engine bay facelift (bare metal to paint)and will be available in a few weeks.
I have owned this car for just over a year now and have over 45K into it so I'm taking a bit of a beating selling it at 37K.
thanks again
Brock
Edited by - 1966KGT on 06/26/2008 11:31:18
my new email is now working for pics and info. thanks.
Brock
Edited by - 1966KGT on 06/24/2008 12:52:44
I have decided to sell my FB to persue other interests. Specs are: VIN 6R09K109644( in registry), ivy green paint, black std interior, L.A. DSO, 15x7 & 15x6 S.S. wheels w/BF Goodrichs, original restored rally pac, beautiful all original body panels, dealer GT, #'s matching drivetrain, original data plate. Car won peoples choice at the Northwest Roundup in Bellevue, Wa. and is pictured in the 4th edition of the K registry. Thanks. $45K
Brock
Edited by - 1966KGT on 06/26/2008 11:32:05
<BLOCKQUOTE id=quote><font size=1 face="Verdana" id=quote>quote:<hr height=1 noshade id=quote>
One of my 1966 Kars was Sauterne Gold and I painted it as original. It looked good as the color goes but I never fell in love with it and eventually sold it as I wanted a different color. It was a really nice rust free Hipo GT black pony interior convertible and in retrospect, I could have painted it a different color and I may have kept the Kar. The keeper Kars that I have now are 1966 Hipo GT black pony interor fastbacks. One is Silver Frost and the other is Signal Flare Red. Both colors are more than acceptable in my book.
-Fred-
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana" size=2 id=quote>
Fred, If you don't mind me asking, did you buy the silver frost Kar from Carl Lind in washington state?
it's supposed to be a C50F-J carb, is it not?
This is the second repop fan that I have seen recently described as the "older" repop, which was made by the original manufacturer. It too appears to be the latest repop from Branda with the incorrect reverse stamping on the blades, which were made in Taiwan.