Posts by C6ZZKGT

    It is true the the 65 and early 66 K mounts are much different than standard mounts for either year. All of the extra bolts, rebound insulators and the thick main insulators give the impression that the mount is thicker overall. Ford made up for the extra thickness by using a cast frame bracket that is deeper than the standard 65 cast frame brackets. This makes the overall height of the engine the same with either style of mounts.

    -Fred-

    I was just notified by Ebay that the seller of this car was just suspended by Ebay. It is not clear to me what happened but Ebay recommended that if I had sent the seller any money that I should use all means possible to recover it. Luckily I was not the high bidder and have not sent any funds for this car. Maybe this explains why it was back on Ebay so fast after the first sale.

    -Fred-

    I had a 66 T5 Hipo GT Convertible and it too had the evenly spaced export brace, cowl reinforcement and shock tower washers. I was involved with another 66 T5 C code fastback that had the evenly spaced export brace, cowl reinforcement and shock tower washers as well. The export cars used different bolts and washers than standard cars for the export brace to firewall. Shelbys used the same ones as well. Not all export cars received these items but my understanding is that the ones destined for Europe usually did have the entire package of pieces as Ford felt that the road conditions there were rougher. The idea was to give the cars added rigidity. Cars destined for Canada usually did not have these.

    -Fred-

    This car is back on Ebay again by the same seller. I guess the last buyer did not complete the sale. I do not know how to post a link so I will just give the Ebay auction number of 170061164448.

    -Fred-

    The seller stated that the title is for a convertible but not necessarily for a K code. If it was a K code title I am sure that he would have highlighted that in his description. All the same, it all looks shady to me as well.

    -Fred-

    Special Ed,

    I am basing my statement of an eight inch rear end based on the fact that I have both an eight and a nine inch housing standing next to each other making it easy to compare. Axle tubes on both eight and nine rear ends in 65-66 Mustangs are tapered at the spring perches. The picture taken from in front of the rear end, although dark, still appears to be an eight inch. The clincher for me is the way the housing is shaped. The oil fill plug on a nine inch is further below center line of the two dimples in the housing than an eight inch. The axle tubes on a nine inch are straight across where they weld to the center of the housing and an eight inch has a slight step like this one. The area on the housing where the oil fill plug goes is not depressed on a nine inch like it is on an eight inch. The nine inch housing has a noticeable 2 1/2 inch wide flat vertical band that is in the center of the rear part of the housing just to the left of the oil fill plug. The band is part of the housing stamping and not an added piece.

    -Fred-

    This last set of manifolds were from a 64 Fairlane. Keep in mind that the right side 63 and 64 Fairlane Hipo exhaust manifold has a provision for an automatic choke that is not used on a Mustang. It will fit a Mustang but the appearance of the manifold with the choke provision is wrong.