They usually do look better in pictures than in person.
-Fred-
They usually do look better in pictures than in person.
-Fred-
I believe that the particular flywheel in question is one that just ended on Ebay and has a casting number of C6ZE 6380 A with a stamping of C7ZE-A. The date code is 2C22 which at the very earliest would have been March 22, 1972. It is definitely not an original flywheel however it does match as a Ford replacement Hipo flywheel in the Ford parts manuals.
-Fred-
If the D1AE-AA number is on the balancer itself and not the pulley, it will be for a 400 engine. Is it possible that you misread it and maybe it is a D1ZE rather than a D1AE?
-Fred-
That wagon seemed to have the tailgate features that GM ended up using in the early 70's on their full size wagons.
-Fred-
I would take four of the number ones for my two Kars.
-Fred
It is also important to remember to make sure that you have the heavy return spring for the clutch pedal on the brake pedal hanger bracket as it acts as a pressure relief once the pedal gets about 2/3 of the way to the floor. If you do not have the spring it makes the clutch pedal get even harder to push down as it approaches the floor.
-Fred-
Intake manifold is Ebay item number: 140174877297
-Fred-
The original Hipo clutch disc is a C3OZ 7550 F and is 10 1/2 inches. The Ford replacement Hipo disc is a C7ZZ 7550 B and although it is listed in the Ford parts book as a 10 1/2 inch disc, it is actually closer to 10.4 inches. I have both of these discs in my stock and I have personally measured them so this is not a guess on my part.
-Fred-
I have both 65 and 66 originals and the lower arm is welded with the angle forward. If it was not this way, you would have less travel in a straight line for the lower clutch rod. This could give you a less clean clutch disengagement which would not be good.
-Fred-
At least you now have the seller in a negotiating position. You did not have that earlier. It appears that the seller would rather sell it than sit on it so now you need to consider the previous comments in this thread regarding a difference of a thousand or so between you and the Kar.
-Fred-
Actually being a Motorcraft distributor makes the date either for 1978 or 1988 as a 1968 date would be an Autolite.
-Fred-
Does this include both the housing and piston?
-Fred-
This is getting very confusing as these tend to stray from what is considered to be the "norm". Pictures of all of these posted here would be a real education for all of us.
-Fred-
The biggest problem with getting one of Fred's Kars would be convincing his wife to let him sell one. She wants him to keep all of the classics Kars. The penalty for selling one is not pretty.
-Fred-
Very well done, Dave.
-Fred-
If you bought this distributor plus the bare block that the seller has, you would be in $3,298 with only a block and distributor. By the time you were done you could easily tie up $10,000 in parts only.
-Fred-
The problem Fred's silver one for this particular buyer is that the silver one has the VIN matching drive train. There would be no challenge in that.
-Fred-
Fortunately for me my wife is totally into this stuff and backs me all the way. My wifes ideal place to live would be a warehouse with the Kars downstairs and our living quarters upstairs. This is truly her dream and we are working on trying to make that happen. Am I the luckiest guy on this site or what?
-Fred-
The NOS styled steel wheel hold down bolt that I have is the hook style and not the carriage bolt style.
-Fred-
Ed,
The bolt that you need is 9 1/2 inches long and fits a very few, but not all, 65 to 67 full size Fords. If you want exact applications you can contact me. The retainer plate was actually a 68 full size Mercury part. I do have an NOS bolt and I may have an extra used retainer but I am away from home at the moment so I am unsure of that.
-Fred-