Posts by C6ZZKGT

    The Comet export brace is a cleaner installation than the Mustang one. You can look at any 65/66 Shelby underhood picture to see the extra firewall reinforcement as the Mustang version is sandwiched between the export brace and the firewall. It sticks out beyond the export brace on the sides and is partially blended in with what appears to be seam sealer and then painted body color. The Comet version of the reinforcement is below the firewall pinch weld to the upper cowl and is not really obvious to the untrained eye. It is painted black like the rest of the engine compartment so it blends right in. The Comet shocks only have a single stud with bushings going through the shock tower caps so there is no place or need for extra washers like on the Mustang. The Mustang shock attaches with 2 bolts to the cap and that is where the washers are added. A friend of mine has a 65 Hipo Cyclone so this information is first hand as I regularly work on his car.

    -Fred-

    Darrell, I would have a tough time using an NOS block in even a Hipo Kar right now. I have an NOS 65 Hipo head that I will most likely never use. I have several NOS Hipo carbs just because they are only NOS once so it seems better to just have a part that is now a benchmark for rebuilt units. It seems no worse to me than having a high end Kar that is only a trailer queen and never gets driven.

    -Fred-

    Rene, if you do the mods that Bo suggests you will really appreciate the handling difference. I did this to one of my Kars 25 years ago and it has held up well without any unusual tire wear all of this time. I also added Koni shocks, export brace and Monte Carlo bar to triangulate the front end better for rigidity as Shelby did. I did not remove the original welded on shock tower brace brackets so that I can always put the Kar back to original. I have put over 80,000 miles on it since and the Konis are still good on all four corners. I can still adjust them up to kill if I really want to stiffen it more but I have them just slightly off of kill to make the Kar ride well. I used the original GT springs that came on my Kar although I have put the Meier springs on others with great success.

    -Fred-

    Darrell, did this come with the cam sprocket, cam retainer plate and crank sprocket with the crank sprocket counterweight? A new short block from Ford would have had all of this including the chain. It would also have had the key in the crank which yours does not have although it could have been removed. A new crank by itself does not come with a key. It would also have the rear cam plug which is not in your block. New ford short blocks would generally not have cosmoline protectant on the block. I am unsure whether your block has cosmoline or not but it does look like it might. If you do not have the other sprockets and parts it is entirely possible that this was actually bought as all seperate pieces. That does not make it bad but might explain the discrepancy on the crank. Slightly unrelated to this but interesting is that Ford had a red tag sale for 5 bolt 289 Hipo short blocks in 1972 for around $250 as I recall as Ford was trying to clear out old inventory. They also had 427 Cammers on the same deal for around $1,800. I ordered a few of all of these at the time and so did a number of my friends. None of us know anyone that ever receieved any of these from that one time deal, though.

    -Fred-

    Great set of pictures, Darrell!! Nice history to add the this site. Ford actually sold bare blocks and short blocks as new parts. Complete engine assemblies are available for current production only. Ford only offered long blocks through their authorized remanufacturers of which this one is not. I would say that this was a new short block from Ford and that the heads, althouigh probably purchased at the same time, were seperate. Another reaon that this makes sense is the lack of head locating dowels in the block as Ford did not put them in short blocks normally. It is great to see a totally new Hipo short block.

    -Fred-