Do you need for the filter to be narrower or shorter? One choice only please.
-Fred-
Do you need for the filter to be narrower or shorter? One choice only please.
-Fred-
Dave, I have been successful in getting them done. I had both a 65 and 66 style done as samples to make sure that this will work. I am in the process of gathering up the first 50 pumps that I need to meet their required quota.
-Fred-
Charles, I just sent you an email and a PM.
-Fred-
This car is back on Ebay again from the San Diego collection. It is still trying for the $125,000 mark.
http://cgi.ebay.com/ebaymotors/ws/…em=180225602084
-Fred
The S7MS 3600 B was wood and fit both the GT350 and GT500. It was available through the Ford parts system and would have been in a Ford box. It would not have come with the horn button as there were two different ones for the GT350 and GT500. The part number on this box is unreadable in the pictures and the receipt is for an S7MS 3600 A which is not in the Ford parts book.
-Fred-
I am happy that ZUL25 made it right for you Charles.
-Fred-
The sellers name is Marty Macintosh. He usually prices his items high in hopes of getting a player. He was the one that sold the Hipo fastback roof and title recently. He has used a number of handles on Ebay as listed below. You may recognize some of them:
User ID**********Effective Date****End Date
theroadcars*******Jan-19-08*******Present
cowboys_mustang**Nov-12-04******Jan-19-08
coyboys_mustang**Oct-11-04*******Nov-12-04
hipo2go**********Jun-10-04*******Oct-11-04
-Fred-
It is definitely a non Ford part or a GYPO as we call it in the business, as the description on the box begins with "replaces". Ford never did that. It is an earlier simulated Ford packaging. Sometimes they will have a real Ford part in the box but most of the time it is a substandard knock off. There are a lot of simulated Ford packaged parts on Ebay being represented as NOS. Sometimes the sellers are unaware of the difference and change their auction after I let them know however most of the time it is buyer beware.
-Fred-
Charles, Did ZUL25 try to make it right for you?
-Fred-
The Ford parts book calls for 1260 U-Joints for the 65/66 Mustang application. A 1310 setup will work on the rear end if the driveshaft and front slip yoke is set up that way. The difference is that the 1260 is an inside clip or Mechanics type where the 1310 is an outside clip or Spicer type. The 1330 U-Joint is an outside clip or Spicer type with a larger cross dimension. These of course are the stronger ones for the later big block, some 351 and Boss 302 cars.
-Fred-
This Kar has an aftermarket fan, later replacement balancer and timing cover.
-Fred-
The Rally-Pac is correct. The 65 one that you are referring to is for 5 dial instruments in 65 and all 66 Mustangs. Windshield washers were optional on 64 1/2 and 65.
-Fred-
I can not imagine that this Kar has reached this price level.
-Fred-
Bo,
I have seen a number of these GYPO valves sold on Ebay. The simulated Ford packaging fools a lot of people.
-Fred-
I have an NOS 8K Ford Rally-Pac in the Ford box that has FORD on the tach. It also does not say Rally-Pac on the bridge between the tach and the clock. This fits with the idea that the factory installed ones were likely to say MUSTANG on the tach and have Rally-Pac on the bridge.
-Fred-
Mark,
I have both emailed and sent a PM to you.
-Fred-
Are you looking for November/December 64 or 65?
-Fred
In defense of Cylinder Head Exchange, they are really good people to deal with normally as I go there quite often. However if they had any Hipo heads, I would alredy have gotten them as they call me whenever anything shows up. Between Cylinder Head Exchange and Valley Head Service, most heads can be salvagable. If you want to send me your head, I can run it around for you as they are both in my area and I did run the Valley Head Service shop at one time. Larry Ofria (Valley Head Service owner) and I go back embarrassingly far in time to around 1966. He was working out of a chicken coop at the time doing heads under contract for a chicken farmer from Texas. I am trying to remember the name of the chicken farmer. I remember now! It was someone named Carroll Shelby. Maybe you have heard of him?
-Fred-
The C5ZZ valve is definitely a screw in valve as I have several NOS ones in stock. They are listed in the 1965 bound Ford parts book as fitting 260, 289 and 289 Hipo engines. The C5AZ valve is also listed for the same engines. I would say that the C5ZZ one is probably the ones used on the early 5 bolt versions with a 378754-S 90 degree adaptor fitting for the PCV hose.
-Fred-
I just sent you an email and a PM.
-Fred-