Rick, What BIGAL is referring to is the lack of clearance at the shock tower to remove some of the bolts without moving the exhaust manifolds. This would especially apply on the right hand side long bolts.
-Fred-
Rick, What BIGAL is referring to is the lack of clearance at the shock tower to remove some of the bolts without moving the exhaust manifolds. This would especially apply on the right hand side long bolts.
-Fred-
Even though it is incorrect, I think that the woodgrain on the AM 8 track radio bezel does go well with the rest of the interior.
-Fred-
Mark, I find that it shows up better without magnifying the image. Just have your correct Hipo carburetor in hand for comparison and the difference really stands out.
-Fred-
Mark, I went through all of my Ford master parts catalogs on this. The good news is that I did finally find the application. The bad news is that I found it in my 64-72 Ford truck master catalog. It has many truck applications from 64-67 and they are all 330 M/D, 330 H/D, 361 and 391 engines.
-Fred-
Great job, Stephan!!
-Fred-
Mark, You will pretty much need to have a correct Hipo carburetor in hand to notice the subtle difference. If you compare your Hipo carburetor where the fast idle cam for the manual choke linkage attaches to the carburetor, you will notice the lack of the cast in stop on the carburetor in the picture compared to yours. Clone carburetors do not have this stop as only Hipo carburetors have them.
-Fred-
San Jose did not have a buck tag.
-Fred-
Rick, The air cleaner does not need to be off to see the difference as one of the differences is in the casting that shows in the pictures.
-Fred-
This Kar appears to have a clone carburetor.
-Fred-
Possibly I am misunderstanding what you are trying to say but the C3OE-A casting number is the correct number for a Hipo rear main bearing cap.
-Fred-
The medallion that you are referring to is a round Cobra emblem that is a subkit number C3RA 19D531 A consisting of two of the emblems. They definitely came with camshaft kits and multiple carburetion kits such as tripower, dual quads and the 4-2V kit(Webers). They did not come with single carburetor, engine dress up or oil pan kits.
-Fred-
Back on Ebay again as a regular auction with no Buy-It-Now:
http://cgi.ebay.com/ebaymotors/ws/…K%3AMEWAX%3AVRI
-Fred-
This Kar is back on Ebay again with no changes:
http://cgi.ebay.com/ebaymotors/For…5fCarsQ5fTrucks
-Fred-
Being as this Kar was originally an automatic transmission Kar, would it have had a VIN stamped trans? If so, where would it be stamped? I am restoring a similar Kar right now for someone else that was a San Jose build.
-Fred-
Welcome aboard, Mike.
-Fred-
The data plate itself is a made up one due to the strange codes. It is interesting that they would not use their new serial number on this plate.
-Fred-
Kenyon, I just sent you an email.
-Fred-
What year "K" code are you working with? The earlier "K" code Fairlanes used smaller intake valves than Mustangs.
-Fred-
Scott, Could you please post a link to this engine?
-Fred-