Used 289 Carburetor Spacer Plate

Quote from C6ZZKGT

Here is an Ebay auction for a used Hipo 289 carburetor spacer by Ebay member "mikes_chevys" with a Buy-It-Now of $49.00:

One original Ford carburetor spacer,part # C4OE-9A589-A.This was used on 1964-1968 Mustangs with a 289 or 302,and 1969 Mustangs with a 351w.This has been beadblasted and it is in great shape.This is an impossible to find item,so dont miss out on this one.See my other auctions for more hard to find items.Thanks and happy bidding.

Payment is to be received within 7 days of auctions close.All items are shipped within 24 hours of payment being received.I only ship to the united states.

https://www.ebay.com/itm/1964-1965-…5.c100005.m1851

-Fred-

This used Hipo 289 carburetor spacer sold April 28, 2020 on Ebay for $40.00.

-Fred-

Here is an Ebay auction for a used Hipo 289 carburetor spacer by Ebay member "oldpartsman-1" with a Buy-It-Now of $49.99:

1964-1969 Ford Mustang, GT, GTA, GT/CS, Mach 1, Grande, Shelby GT350, Falcon, Fairlane, Torino, Ranchero, Mercury Cougar, XR7, Eliminator, Montego, Comet, Cyclone. ORIGINAL 4V CARBURETOR SPACER For 289-HIPO-302-351W Engine. 1" HEIGHT. This is an ORIGINAL FORD PART. Casting Number C4OE-9A589-A . Removed from a good running 66 Mustang GT with a 289 A code 4V Motor. This Spacer is in Great Original Condition. It is Straight and should clean-up great. No heavy Build-Up on the inside. Has a Good PCV Port Tube. Not clogged. No Cracks. Overall, this is a Great Original 4V Carburetor Spacer

https://www.ebay.com/itm/1964-1965-…f8AAOSwe~Ze8N6R

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used Hipo 289 carburetor spacer by Ebay member "four28cobrajet" with a Buy-It-Now of $74.99:

This item is a ford v8 4bbl aluminum factory oem carburetor spacer plate. This spacer was factory on most 289 and 302 4v engines 1963 - 1968 including mustangs, it was also used on the 1969 mustang gt350 351w and the 1969 cougar 351w.

This spacer is the more rare one. It has a raised gasket surface going all the way around the top of the spacer. The spacer has been glass beaded. The spacer is in mint condition, with basically no pitting. Most of the spacers, if you are lucky enough to find them, they are usually pitted pretty badly. The spacer basically looks like brand new, and would look great on any show quality vehicle.

Ford # C4OE-9A589-A & C4OE-9A589-E

https://www.ebay.com/itm/Ford-Carbu…5.c100036.m2109

-Fred-

Display More

This used Hipo 289 carburetor spacer sold June 25, 2020 on Ebay for $74.99.

-Fred-

Here is an Ebay auction for a used Hipo 289 carburetor spacer by Ebay member "w.j.i.e." with a Buy-It-Now of $50.00 or make offer:

https://www.ebay.com/itm/1965-66-Mu…sQAAOSwU~Vek0r-

-Fred-

Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "kevinstang " with a starting bid of $49.99:

Your bidding on this old original Ford 4 barrel carb spacer with the C30E-9A589-E part number marked on it as shown. Original to late 1963 and early 1964 289 V8 engines with the 4 barrel autolite 4100 carb and factory intake. Selling as I bought it- could use more cleaning, but overall not bad looking early part. According to books I have this spacer was used primarily on early 289 high performance engines in Fairlanes, Galaxies and Falcons and possibly some early 1964 1/2 Mustangs. Shoud fit and work with other year 289 -4V applications as well when a carb spacer is needed. Look at pictures carefully and bid accorgingly.

https://www.ebay.com/itm/274420371565?ul_noapp=true

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "kevinstang " with a starting bid of $49.99:

Your bidding on this old original Ford 4 barrel carb spacer with the C30E-9A589-E part number marked on it as shown. Original to late 1963 and early 1964 289 V8 engines with the 4 barrel autolite 4100 carb and factory intake. Selling as I bought it- could use more cleaning, but overall not bad looking early part. According to books I have this spacer was used primarily on early 289 high performance engines in Fairlanes, Galaxies and Falcons and possibly some early 1964 1/2 Mustangs. Shoud fit and work with other year 289 -4V applications as well when a carb spacer is needed. Look at pictures carefully and bid accorgingly.

https://www.ebay.com/itm/274420371565?ul_noapp=true

-Fred-

This used Hipo 289 carburetor spacer received no bids by July 13, 2020 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "kevinstang " with a starting bid of $49.99:

Your bidding on this old original Ford 4 barrel carb spacer with the C30E-9A589-E part number marked on it as shown. Original to late 1963 and early 1964 289 V8 engines with the 4 barrel autolite 4100 carb and factory intake. Selling as I bought it- could use more cleaning, but overall not bad looking early part. According to books I have this spacer was used primarily on early 289 high performance engines in Fairlanes, Galaxies and Falcons and possibly some early 1964 1/2 Mustangs. Shoud fit and work with other year 289 -4V applications as well when a carb spacer is needed. Look at pictures carefully and bid accorgingly.

https://www.ebay.com/itm/274420371565?ul_noapp=true

-Fred-

This used Hipo 289 carburetor spacer received no bids by July 13, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $44.99:

https://www.ebay.com/itm/2744272666…em=274427266630

-Fred-

Here is an Ebay auction for a used Hipo 289 carburetor spacer by Ebay member "mikes_chevys" with a Buy-It-Now of $69.00:

One original Ford carb spacer,part # C4OE-9A589-A or E.This was used on all 1964-1968 Ford 289 and 302 mustang engines,and 1969 Mustang 351W engines.This is in great shape,and it has no pitting or damage.See my other auctions for more hard to find items.Thanks and happy bidding.

Payment is to be received within 7 days of auctions close.All items are shipped within 24 hours of payment being received.

I only ship to the united states.

https://www.ebay.com/itm/64-65-66-6…ity!91387!US!-1

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "kevinstang " with a starting bid of $49.99:

Your bidding on this old original Ford 4 barrel carb spacer with the C30E-9A589-E part number marked on it as shown. Original to late 1963 and early 1964 289 V8 engines with the 4 barrel autolite 4100 carb and factory intake. Selling as I bought it- could use more cleaning, but overall not bad looking early part. According to books I have this spacer was used primarily on early 289 high performance engines in Fairlanes, Galaxies and Falcons and possibly some early 1964 1/2 Mustangs. Shoud fit and work with other year 289 -4V applications as well when a carb spacer is needed. Look at pictures carefully and bid accorgingly.

https://www.ebay.com/itm/274420371565?ul_noapp=true

-Fred-

This used Hipo 289 carburetor spacer received no bids by July 13, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $44.99:

https://www.ebay.com/itm/2744272666…em=274427266630

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 20, 2020 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "kevinstang " with a starting bid of $49.99:

Your bidding on this old original Ford 4 barrel carb spacer with the C30E-9A589-E part number marked on it as shown. Original to late 1963 and early 1964 289 V8 engines with the 4 barrel autolite 4100 carb and factory intake. Selling as I bought it- could use more cleaning, but overall not bad looking early part. According to books I have this spacer was used primarily on early 289 high performance engines in Fairlanes, Galaxies and Falcons and possibly some early 1964 1/2 Mustangs. Shoud fit and work with other year 289 -4V applications as well when a carb spacer is needed. Look at pictures carefully and bid accorgingly.

https://www.ebay.com/itm/274420371565?ul_noapp=true

-Fred-

This used Hipo 289 carburetor spacer received no bids by July 13, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $44.99:

https://www.ebay.com/itm/2744272666…em=274427266630

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 20, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $39.99:

https://www.ebay.com/itm/2744345186…em=274434518646

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "kevinstang " with a starting bid of $49.99:

Your bidding on this old original Ford 4 barrel carb spacer with the C30E-9A589-E part number marked on it as shown. Original to late 1963 and early 1964 289 V8 engines with the 4 barrel autolite 4100 carb and factory intake. Selling as I bought it- could use more cleaning, but overall not bad looking early part. According to books I have this spacer was used primarily on early 289 high performance engines in Fairlanes, Galaxies and Falcons and possibly some early 1964 1/2 Mustangs. Shoud fit and work with other year 289 -4V applications as well when a carb spacer is needed. Look at pictures carefully and bid accorgingly.

https://www.ebay.com/itm/274420371565?ul_noapp=true

-Fred-

This used Hipo 289 carburetor spacer received no bids by July 13, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $44.99:

https://www.ebay.com/itm/2744272666…em=274427266630

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 20, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $39.99:

https://www.ebay.com/itm/2744345186…em=274434518646

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 28, 2020 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "kevinstang " with a starting bid of $49.99:

Your bidding on this old original Ford 4 barrel carb spacer with the C30E-9A589-E part number marked on it as shown. Original to late 1963 and early 1964 289 V8 engines with the 4 barrel autolite 4100 carb and factory intake. Selling as I bought it- could use more cleaning, but overall not bad looking early part. According to books I have this spacer was used primarily on early 289 high performance engines in Fairlanes, Galaxies and Falcons and possibly some early 1964 1/2 Mustangs. Shoud fit and work with other year 289 -4V applications as well when a carb spacer is needed. Look at pictures carefully and bid accorgingly.

https://www.ebay.com/itm/274420371565?ul_noapp=true

-Fred-

This used Hipo 289 carburetor spacer received no bids by July 13, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $44.99:

https://www.ebay.com/itm/2744272666…em=274427266630

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 20, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $39.99:

https://www.ebay.com/itm/2744345186…em=274434518646

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 28, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

https://www.ebay.com/itm/2744425368…em=274442536830

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "kevinstang " with a starting bid of $49.99:

Your bidding on this old original Ford 4 barrel carb spacer with the C30E-9A589-E part number marked on it as shown. Original to late 1963 and early 1964 289 V8 engines with the 4 barrel autolite 4100 carb and factory intake. Selling as I bought it- could use more cleaning, but overall not bad looking early part. According to books I have this spacer was used primarily on early 289 high performance engines in Fairlanes, Galaxies and Falcons and possibly some early 1964 1/2 Mustangs. Shoud fit and work with other year 289 -4V applications as well when a carb spacer is needed. Look at pictures carefully and bid accorgingly.

https://www.ebay.com/itm/274420371565?ul_noapp=true

-Fred-

This used Hipo 289 carburetor spacer received no bids by July 13, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $44.99:

https://www.ebay.com/itm/2744272666…em=274427266630

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 20, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $39.99:

https://www.ebay.com/itm/2744345186…em=274434518646

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 28, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

https://www.ebay.com/itm/2744425368…em=274442536830

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by August 4, 2020 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "kevinstang " with a starting bid of $49.99:

Your bidding on this old original Ford 4 barrel carb spacer with the C30E-9A589-E part number marked on it as shown. Original to late 1963 and early 1964 289 V8 engines with the 4 barrel autolite 4100 carb and factory intake. Selling as I bought it- could use more cleaning, but overall not bad looking early part. According to books I have this spacer was used primarily on early 289 high performance engines in Fairlanes, Galaxies and Falcons and possibly some early 1964 1/2 Mustangs. Shoud fit and work with other year 289 -4V applications as well when a carb spacer is needed. Look at pictures carefully and bid accorgingly.

https://www.ebay.com/itm/274420371565?ul_noapp=true

-Fred-

This used Hipo 289 carburetor spacer received no bids by July 13, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $44.99:

https://www.ebay.com/itm/2744272666…em=274427266630

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 20, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $39.99:

https://www.ebay.com/itm/2744345186…em=274434518646

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 28, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

https://www.ebay.com/itm/2744425368…em=274442536830

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by August 4, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $34.99:

https://www.ebay.com/itm/2744506164…em=274450616465

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "kevinstang " with a starting bid of $49.99:

Your bidding on this old original Ford 4 barrel carb spacer with the C30E-9A589-E part number marked on it as shown. Original to late 1963 and early 1964 289 V8 engines with the 4 barrel autolite 4100 carb and factory intake. Selling as I bought it- could use more cleaning, but overall not bad looking early part. According to books I have this spacer was used primarily on early 289 high performance engines in Fairlanes, Galaxies and Falcons and possibly some early 1964 1/2 Mustangs. Shoud fit and work with other year 289 -4V applications as well when a carb spacer is needed. Look at pictures carefully and bid accorgingly.

https://www.ebay.com/itm/274420371565?ul_noapp=true

-Fred-

This used Hipo 289 carburetor spacer received no bids by July 13, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $44.99:

https://www.ebay.com/itm/2744272666…em=274427266630

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 20, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $39.99:

https://www.ebay.com/itm/2744345186…em=274434518646

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 28, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

https://www.ebay.com/itm/2744425368…em=274442536830

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by August 4, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $34.99:

https://www.ebay.com/itm/2744506164…em=274450616465

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by August 12, 2020 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "kevinstang " with a starting bid of $49.99:

Your bidding on this old original Ford 4 barrel carb spacer with the C30E-9A589-E part number marked on it as shown. Original to late 1963 and early 1964 289 V8 engines with the 4 barrel autolite 4100 carb and factory intake. Selling as I bought it- could use more cleaning, but overall not bad looking early part. According to books I have this spacer was used primarily on early 289 high performance engines in Fairlanes, Galaxies and Falcons and possibly some early 1964 1/2 Mustangs. Shoud fit and work with other year 289 -4V applications as well when a carb spacer is needed. Look at pictures carefully and bid accorgingly.

https://www.ebay.com/itm/274420371565?ul_noapp=true

-Fred-

This used Hipo 289 carburetor spacer received no bids by July 13, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $44.99:

https://www.ebay.com/itm/2744272666…em=274427266630

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 20, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $39.99:

https://www.ebay.com/itm/2744345186…em=274434518646

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 28, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

https://www.ebay.com/itm/2744425368…em=274442536830

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by August 4, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $34.99:

https://www.ebay.com/itm/2744506164…em=274450616465

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by August 12, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

https://www.ebay.com/itm/2744576200…em=274457620077

-Fred-

Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "sodaunique " with Buy-It-Now of $78.99:

GOOD CLEAN CARB SPACER 289-302 4V 1963/68 69 MUSTANG GT 351 W ALSO 1969 COUGAR WITH A 351W. BOLT WAS THREADED IN BEFORE BEAD BLASTED, GOOD CLEAN THREADS NO DAMAGE. THIS IS THE HARDER TO FIND SPACER PLATE WITH RAISED SURFACE FOR BETTER GASKET SEAL.HAVE FLAT STYLE ON OTHER AUCTION.

https://www.ebay.com/itm/Hipo-Ford-…Box!91387!US!-1

-Fred-

Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "sodaunique " with Buy-It-Now of $78.99:

https://www.ebay.com/itm/Hipo-Ford-…Box!91387!US!-1

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "kevinstang " with a starting bid of $49.99:

Your bidding on this old original Ford 4 barrel carb spacer with the C30E-9A589-E part number marked on it as shown. Original to late 1963 and early 1964 289 V8 engines with the 4 barrel autolite 4100 carb and factory intake. Selling as I bought it- could use more cleaning, but overall not bad looking early part. According to books I have this spacer was used primarily on early 289 high performance engines in Fairlanes, Galaxies and Falcons and possibly some early 1964 1/2 Mustangs. Shoud fit and work with other year 289 -4V applications as well when a carb spacer is needed. Look at pictures carefully and bid accorgingly.

https://www.ebay.com/itm/274420371565?ul_noapp=true

-Fred-

This used Hipo 289 carburetor spacer received no bids by July 13, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $44.99:

https://www.ebay.com/itm/2744272666…em=274427266630

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 20, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $39.99:

https://www.ebay.com/itm/2744345186…em=274434518646

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 28, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

https://www.ebay.com/itm/2744425368…em=274442536830

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by August 4, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $34.99:

https://www.ebay.com/itm/2744506164…em=274450616465

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by August 12, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

https://www.ebay.com/itm/2744576200…em=274457620077

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by August 17, 2020 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "kevinstang " with a starting bid of $49.99:

Your bidding on this old original Ford 4 barrel carb spacer with the C30E-9A589-E part number marked on it as shown. Original to late 1963 and early 1964 289 V8 engines with the 4 barrel autolite 4100 carb and factory intake. Selling as I bought it- could use more cleaning, but overall not bad looking early part. According to books I have this spacer was used primarily on early 289 high performance engines in Fairlanes, Galaxies and Falcons and possibly some early 1964 1/2 Mustangs. Shoud fit and work with other year 289 -4V applications as well when a carb spacer is needed. Look at pictures carefully and bid accorgingly.

https://www.ebay.com/itm/274420371565?ul_noapp=true

-Fred-

This used Hipo 289 carburetor spacer received no bids by July 13, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $44.99:

https://www.ebay.com/itm/2744272666…em=274427266630

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 20, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $39.99:

https://www.ebay.com/itm/2744345186…em=274434518646

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by July 28, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

https://www.ebay.com/itm/2744425368…em=274442536830

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by August 4, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer without PCV is back on Ebay again with a new lower starting bid of $34.99:

https://www.ebay.com/itm/2744506164…em=274450616465

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by August 12, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

https://www.ebay.com/itm/2744576200…em=274457620077

-Fred-

Display More

This used Hipo 289 carburetor spacer received no bids by August 17, 2020 and therefore did NOT sell.

-Fred-

Display More

This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

https://www.ebay.com/itm/2744640727…em=274464072718

-Fred-