HIPO Heads on Ebay

  • Sold for <b>$1526</b> by richardlbrown


    <BLOCKQUOTE id=quote><font size=1 face="Verdana" id=quote>quote:<hr height=1 noshade id=quote>Classic 1965 Shelby GT 289 HIPO heads disassembled and inspected, all numbers matching.


    all number and date codes can be found in place to prove k model parts all parts are known to be in great condition. feel free to email any questions.<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana" size=2 id=quote>

    link

  • Sold for <b>$1625</b> by juliep6


    <BLOCKQUOTE id=quote><font size=1 face="Verdana" id=quote>quote:<hr height=1 noshade id=quote>Up for auction are a date matched set of original 1965 Shelby GT350 or K code Mustang cylinder heads.


    Date codes on head # 1 read 5 F 8 and head # 2 reads the same 5 F 8 which translates out to 1965 May 8th .


    These virgin super low mileage heads are in such fantastic condition Both heads were hot tanked wire wheel cleaned in the combustion area and ports etc then the were

    magnaflexed to make sure they were not cracked.


    All this was done to show the quality of these original cylinder heads and reassure you when bidding.


    The heads are such low mileage that they did not need to have their original guides replaced or touched for that matter (no knurling) the original valves were cleaned and ground as well as the seats new seals were installed also the heads were surfaced a minimum amount of .007 to make sure of a flat deck to head seal.

    They are now ready to be installed on your show car or collectible Shelby GT350 or K code hipo car.


    Bid with confidence and bid to win Shipping will be charged at the amount it actually costs Sometime I end up paying the extra for insurance or overages which I don't mind

    Thanks for looking


    <hr class="bbcode_rule" />
    On Mar-27-09 at 19:12:37 PDT, seller added the following information:


    The heads are date matched June 8th 1965

    <hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana" size=2 id=quote>

    link

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!