Posts by tom991_old

tom991_old · 1973 302 heads, ready to bolt on tom991_old October 30, 2007 at 1:30 PM

I have a pair of matching D3OE 302 heads available. Rebuilt 10K miles ago. Complete with OEM rocker arms and a set of Sealed Power push rods. $100 plus shipping. mobius1053@netzero.net.

tom991_old · Great running SB Ford 221 CID engine tom991_old October 30, 2007 at 1:02 PM

I have available a Great Running original Small Block Ford 221 cubic inch long block motor for sale. $650 or best reasonable offer. Freshly rebuilt heads and new platinum spark plugs. The engine runs really smooth, and cool, doesn't leak, or burn oil. It comes with valve covers, oil pan, timing cover. You'll need a 2 barrel intake and carb and oil dip stick and tube. The intake and carb went on a 289 motor. I also have the water pump I took off during removal but you should replace it with a new one, they're cheap. The heads were rebuilt completely and have the larger 289 size valves so it breathes better. This engine was originally produced for the 1962/63 Fairlane and Meteor but can be used in a Falcon or Comet or 64 Mustang. It is a 5 bolt block. This is a strong running engine. The lower half was professionally rebuilt about 25K miles ago with quality parts. I will deliver the engine within 100 mile radius for $50. You'll need a lift on your end. I was using the engine in another car while I was rebuilding my 289. I drove a car with this motor from Virginia to Florida in November 2006 without any problems. It's a reliable motor that just goes and goes. When I bought the motor it had 302 heads with larger power robbing combustion chambers. I replaced the heads in May 2007 with heads designed for this engine which improved performance significantly. I still have a good set of 1973 302 heads D3OE complete with rocker arms and pushrods available for a $100.

.

Respond with Email or call me at 772-539-7935. Lv MSG.

tom991_old

I'l looking for a rebuildable 5 bolt 289 short block or a block with main caps. I prefer one with casting number C4OE-6015-F, DATE CODES B, C, D, or E.

Thanks,

Tom

tom991_old · Wanted: Aug/Sep '63 Block tom991_old October 30, 2007 at 12:46 PM

I have a C3AE-6015-N short block date code 3D22 if you're still looking. I won't be able to get to it until after Nov 9th since it's in a self storage unit I have in Orlando. It was running when I pulled it. I'm not sure about the bore but I will pull the heads and measure. I was hoping to get $200 for the short block or trade it for a rebuildable C4OE-6015-F short block.

I have strong have a C3AE-6015 date code 3K17 221 CID V8 engine with freshly completly rebuilt C40E heads using the larger 289 valves I'm going to advertise for $650 or best reasonable offer.