Posts by SixT5HiPo

    This one SOLD for $375.00 by seller "theblue302". Auction ended with a Buy it Now purchase.


    DESCRIPTION:


    You are bidding on a totally restored 289 HiPo Dual Point distributor. Correct for the Shelby 289 HiPo 306 HP, and the Mustang K code 289 HiPo 271 HP and will work in the 1969-70 Boss 302, 290 HP. Also used in Cougar Eliminator, Comet, and Fairlanes. This is a Ford original HiPo dual point distributor. Part number on the housing reads C5OF-12127-E. The housing casting reads FOMOCO. Date code reads 5GE. It comes complete with all NEW Motorcraft dual points, condenser and correct wire and new Motorcraft breaker plate. Also Motorcraft black rotor and black distributor cap. This thing is sweet!




    eBay link

    Sold for $379 by "bossmusclecars".


    Quote

    Very rare original FOMOCO casting 289 HiPo distributor. Original part # C5OF-12127-E. Date code is "6G15" indicating July 15, 1966 production. Decent used condition, but the wire lead has been taped together and in one area is nearly broken off. It will likely need to be rebuilt and detailed. Again this is the rare early FOMOCO casting and NOT a replacement Autolite or Motorcraft casting.


    link

    Here's a set of 7 used rods and one NOS BOSS rod that SOLD for $335.00 by seller "srkepley".


    DESCRIPTION:


    289 High Performance rods, set of eight. One rod is NOS service replacement, which is identical to the BOSS 302 rod. Both have the same casting number, and differ only in the style of rod bolt used. As you can see, these rods still have the factory orange paint used on the 289 HiPo rotating assembly.







    eBay link

    This one SOLD for $126.50 by "gtacode".


    DESCRIPTION:


    YOUR BID IS FOR A DUAL POINT MOTORCRAFT REPLACEMENT 289 HIPO DISTRIBUTOR. I PURCHASED THIS NEW A LONG TIME AGO AND USED IT LESS THAN 500 MILES. THEN I RESTORED MY CAR BACK TO ORGINAL A CODE SPECS. IT'S IN GREAT SHAPE, AND HAS BEEN IN STORAGE FOR TWENTY YEARS OR MORE. LOOK CLOSELY AT THE PICTURES AND NOTICE THIS IS THE REPLACEMENT STYLE WITH THE BLOCKOFF PLATE. IT ALSO HAS THE EXTRA WIRE FOR THE TACK ON THE HARNESS, READY TO DROP IN AND GO. NEEDS JUST A LITTLE CLEANING FOR SHOW, BUT IS LIKE NEW AND TURNS FREELY.



    eBay link

    Quote from KCode66

    Just saw one of those at a car show last September, Bright Red. I like this color better.


    I agree...These Comets look their best in black or white. I prefer the '65 body over the '64, although both years use the same glass, doors, and "fastback" roofline that originated on the '63 Falcon coupe.


    The Comet Cyclone model was introduced mid-year 1964, building on the S-22 model from 1963. Cyclones are of interest here because a scant few were built in 1964 and '65 with the 289 HiPo package. These are without a doubt the rarest of the 3 car models built by Ford with the 271 hp V-8, with Fairlanes and Mustangs accounting for an overwhelming majority of all HiPo production.


    Cyclones have some interesting, sporty, standard features including: bucket seats, console, woodgrain 3 spoke wheel, a unique interior, and polished stainless wheel covers that simulate chrome reversed wheels. A single checkered flag emblem that was first used on the full-sized Mercury Maurader identifies a Cyclone on the side fender. A small, dash-mounted tachometer was standard, along with a 4bbl V-8 that used regular fuel. The 289 HiPo was available by special order only, and was not an RPO. Consequently, very few were built, and a K code in the VIN does not mean it is a factory HiPo. The '64-65 Comets didn't come with dual exhausts, but the Cyclones had a special low restriction muffler that gave them a distinct sound.


    The "A" code, premium fuel 289 was standard on the 1965 Cyclones, with a choice of automatic or 4 speed transmissions. The HiPo was still available by dealer special order only, and these cars are quite rare. It's likely that less than 100 were built, and they are hard to authenticate without a build sheet, because they don't have the "K" in their VIN. Some '65 HiPo Comet VINs have an "A" code, and some have a blank space in the 5th position of the VIN.


    All HiPo Comets have 9" rear axles, along with a heavy duty export brace, and stiffer suspension. The presence of an original export brace is an easy way to tell if a Comet is a genuine HiPo. Some had an optional transistorized ignition.


    As with most Mercury's, generally the values are not quite as high as their cousins from the Ford division, especially Mustangs. The sale of a '64 Cyclone that's not really a HiPo for over $19,000 is unusual, and probably represents another eBay anomoly.

    Here's a nice looking 1964 Comet Cyclone that SOLD for a hefty $19,500. Although there is a K code in the VIN, it doesn't actually denote the 289 HiPo. For some reason, Mercury used the K code in 1964 to designate a low compresssion 4 bbl 289 that used regular fuel. This is the same engine Mustang used in the short-lived "D" code option. Judging by the high dollars bid on this car, the bidders probably believed this car is a real 289 HiPo. Unfortunately, these "LoPo" K code Mercs have been confusing car collectors for many years...







    eBay link

    After one relisting, this pair of used manifolds SOLD for $299.99 by seller "bossmusclecars".


    DESCRIPTION:


    One pair of original Ford 289 HIPO exhaust manifolds. Left side part # C3OE-9431-B. Right side part # C4ZE-9430-A. These are super nice original castings with no heavy pitting. Exhaust studs are intact. These manifolds had been cleaned and painted with cast iron grey paint, but they have developed some minor surface rust from sitting. There are no apparent cracks or breaks. Overall, a very nice original set of HiPo manifolds.


    eBay link

    This counterweight SOLD for $141.30.


    DESCRIPTION:


    289 HiPo crankshaft balancing counterweight. As far as I can tell this part has never been used. This is required to balance the crankshaft when using the HiPo connecting rods with the larger diameter bolts. No reserve. Good luck bidding.




    eBay link

    This set of used manifolds SOLD for AU$350.00.


    DESCRIPTION:


    Up for auction is a pair of HIPO - K Code exhaust manifolds for Mustangs. They are coded:


    C30Z-9431-B


    C5ZZ-9430-B


    CONDITION: No cracks, repairs have been done to them, all four exhaust flange studs are intact and threads are fine.

    These sell well over US$250+ in the states alone - when & if they are listed. Was planing to install into my 67 Stang, but have changed to a different head package that requires much larger ports.


    Postage will be determined at auction's end . An additional $5.00 handling charge is applicable for trip to Post office (petrol cost) & for packing materials.


    Happy bidding.


    eBay link

    This set of used manifolds SOLD for $286.00.


    DESCRIPTION:


    Welcome! Up for bid are these 289 High Performance Exhaust manifolds. These were removed from a 1966 K code Mustang over 25 years ago. RH manifold is stamped C4ZE-9430-A and G1...on the reverse side the date stamping is 2-9-6 (6 may be a 5). The LH manifold is stamped C3OE-9431-B and G2...on the reverse side the date stamping is 11-2-5 (5 is tough to make out). They are in great shape with NO issues other than what you see...Grab 'em!


    eBay link

    Quote from 66FastbackGT

    what makes you say that? just because?


    There's no sure way to know if those are original heads from a Cobra unless you're the original owner who removed them from a Cobra. There were aproximately 500 K code Fairlanes built in 1963, and about the same number in 1964. We're not sure how many 1964 HiPo Comets were made, but I'd guess less than 100, and they probably used C4OE-B HiPo heads...All HiPo heads were revised by April 1964, and a C4OE-B casting number was used on these "late" 1964 heads. By the summer of 1964, the C4OE-B heads quickly gave way to the C5OE-A or C5AE-E heads with revised machining to accept the alternator mounting bolts.


    It's possible that as many as 1500 5 bolt HiPo engines with C3OE and C4OE heads were made, with at least half of them going into the K code Fairlanes, and the rest going to Shelby American. Shelby probably purchased extra engines and sets of heads for replacement stock, but unless they were all acquired before the castings were revised, the casting numbers and date codes would change as time passed. Since there were less 289 Cobra's built than K code Fairlanes, odds are more likely those heads came from a Fairlane than a Cobra.


    Another reason is that a majority of K code Fairlanes have been scrapped at this point in time. The engines and drivetrains were pulled because the prospects of doing full a restoration on a rusted out K code Fairlane aren't as profitable or easy as just selling the highly valued HiPo parts-especially to those who want to have extra engines and parts for 289 Cobra's, most of which have been preserved.

    Quote from raccol

    Just think how much he would've gotten if he had sold them one at a time.


    Yes...it's funny how they were all offered at the same time. It's also interesting how the final sale price dropped slightly with each auction.

    This seller offered three NOS air filters in three separate eBay auctions. All three were SOLD for $167.50, $152.50, and $129.50 respectively.


    DESCRIPTION:


    I am offering at auction, this NOS 1965-72 Mustang FA-41 Air Filter at NO RESERVE. It is a BRAND NEW, NOS Ford Part. FORD part number:

    B7SZ-9601-A Correct for 289 HIPO, BOSS 302, 351, 390, 428CJ and 429 CJ.

    NOTHING fits like an Original NOS Ford part. There isn't a reproduction part that can duplicate the exact fit and quality of a Genuine Ford Tooled Part. Try to find another one of these!! A must for that concours Ford Mustang or Shelby GT-350 Restoration!!


    On Jan-26-06 at 09:11:34 PST, seller added the following information:


    ATTENTION!!!! YOU ARE NOT SEEING DISCOLORATION OF THE MESH!!! THAT IS A REFLECTION FROM THE BOX!!!!



    eBay link #1


    eBay link #2


    eBay link #3

    This set of used rods were SOLD for $370.00, and included aftermarket forged pistons...


    DESCRIPTION:


    Hello. You are bidding on a very nice set of Boss 302 rods and pistons. The rods are C3AE with the raised circle, and 3/8" football head bolts.


    The rods are exellent, no spun bearings, they should be ready to go, as they were checked by a local machine shop. All rods and caps are numbered.


    The pistons are decent, with minor wear, one has a bigger scuff mark, but it didn't gouge the skirt very bad. Wrist pins are nice and free. The pistons are 4.030 bore forged with a .400 dome. The pistons were milled for proper deck height in another block, so there are no part numbers.


    They may or may not be what you need, as this auction is basically for the rods, so the pistons might be an added bonus.





    eBay link

    This set of used manifolds SOLD for $225.00.


    DESCRIPTION:


    You are bidding on a pair of original Mustang Hipo exhaust manifolds. Part number C4ZE-9430-A with G2 and C3OE-9431-B. The drivers side alpha code underneath part number is unreadable but there is a 2 that is legible. Date codes on other side read 6 22 5 passenger side and 10 8 5 drivers side. Minor surface rust on back side of drivers side but could be cleaned up easily. No cracks and studs are in good shape. These were purchased from Bob's Ford Parts in Portland, Oregon and never used.





    eBay link