Posts by C6ZZKGT

  • Used Hipo Exhaust Manifold

    This used pair of 67 Hipo exhaust manifolds received no bids by July 8, 2020 and therefore did NOT sell.



    -Fred-

  • Used Motorcraft Hipo Distributor

    This used Motorcraft Hipo distributor is back on Ebay again with a new lower starting bid of $399.00:

    https://www.ebay.com/itm/3036179013…em=303617901330

    -Fred-

  • Speedometer Driven Gear

    Quote from recips

    Searched the forum but nothing came up. I recently installed a new cable and now the speedo works but is about 8 mph too high. Before I remove the gear again I would at least know what I am looking for. I have a '65 with a toploader and 3.50 rear gears. Should my driven gear be 17, 18, 19 or 20 teeth? I have stock tires. Thanks

    That combination takes a 17 tooth gear. Ford part number is C2DZ 17271 G. Keep in mind that the Mustang toploader uses a left hand helix gear compared to an automatic transmission. These are readily available and I have several NOS ones. The rule of thumb on number of teeth to make a change is one tooth for every 5-7 MPH. How many teeth does yours have currently?

    Also keep in mind that the HEH-T 65 Mustang Hipo transmission uses a different drive gear inside of the transmission than other standard Mustangs.

    -Fred-

  • 5F07K699242 on Ebay

    This Kar is back on Ebay again with no changes:

    https://www.ebay.com/itm/1965-Ford-…IgAAOSw0uRehHRD

    -Fred-

  • 5F07K699242 on Ebay

    This Kar received no bids by July 8, 2020 and therefore did NOT sell.


    -Fred-

  • Used Hipo Exhaust Manifold

    This pair of used early Hipo exhaust manifolds is back on Ebay again with no changes:

    https://www.ebay.com/itm/1436519960…em=143651996024

    -Fred-

  • Used Hipo Exhaust Manifold

    Quote from C6ZZKGT

    Here is an Ebay auction for a pair of used early Hipo exhaust manifolds by Ebay member "428kid " with a starting bid of $500.00 and a Buy-It-Now of $650.00:

    1963,1964 Ford Fairlane 289 Hipo Exhaust Manifolds. C3OE 9431 B . C3OE 9430 C.. Condition is Used. Here we have a very rare set of exhaust manifolds. These are for 63 and early 64 Ford Fairlane with a 289 Hipo engine. These are not the same as the Mustang and are much much harder to find. These are in good shape for there age. I see some slight pitting shown in the photos , but no damage or repairs. This is a matching set , C3OE 9430 9431 B and C . This is a great set for some one looking for Fairlane Hipo manifolds. Please ask all questions before bidding. These come as pictured as shown. Please look at all the pictures as they show the true condition. Payment should be made via PayPal with in one day after end of auction. Shipping will be to the lower 48 states . Thanks and please check my other items .

    https://www.ebay.com/itm/143646340055?ul_noapp=true

    -Fred-

    This used pair of early Hipo exhaust manifolds received no bids by July 7, 2020 and therefore did NOT sell.


    -Fred-

  • NOS C7ZZ 12127 K FoMoCo Distributor

    Quote from C6ZZKGT

    Here is an Ebay auction for an NOS C7ZZ 12127 K FoMoCo Hipo distributor by Ebay member "f100351" with a starting bid of $575.00:

    For Sale is a 1967 Ford 289 Hi-Po Dual Point Distributor, NOS, part # C7ZZ-12127-K. It is new, never been installed. The casting number on the housing is C7OF-12127-K. The date code is 7L2D. Sam's Vintage Ford Parts has been supplying the Restoration Community for 50 plus years. Shipping to US 48 States will be $ 25.00 for Fedex Ground. Shipping to other locations will be through the Global Shipping Program.

    https://www.ebay.com/itm/1967-Ford-…uUAAOSwXspe85F-

    -Fred-

    This NOS C7ZZ 12127 K FoMoCo Hipo distributor sold July 7 on Ebay for $575.00.

    -Fred-

  • NOS C5ZZ 6540544 B Rear Lower Valance

    This NOS C5ZZ 6540544 B rear lower valance received no bids by July 7, 2020 and therefore did NOT sell.

    -Fred-

  • NOS C5OZ 6316 C Harmonic Balancer

    This NOS C5OZ 6316 C harmonic balancer is back on Ebay again with no changes:

    https://www.ebay.com/itm/1436520000…em=143652000016

    -Fred-

  • NOS C5OZ 6316 C Harmonic Balancer

    Quote from C6ZZKGT

    Here is an Ebay auction for an NOS C5OZ 6316 C harmonic balancer by Ebay member "428kid " with a starting bid of $300.00:

    289 Hipo Harmonic Balancer Nos, C8ZE A Service Replacement , K code Mustang. Here we have a NOS never used service replacement 289 Hipo balancer. C8ZE -A part number. Comes as pictured in original box with original invoice . No issues minus minor shelf wear. Please ask all questions before bidding. Please review all pictures as they tell the true condition. Payment should be made via PayPal with in one day after end of auction. Shipping will be USPS flat rate to all 50 states. Thanks and please check my other items. All others will be on the buyers dime.

    https://www.ebay.com/itm/143646352260?ul_noapp=true

    -Fred-

    This NOS C5OZ 6316 C harmonic balancer received no bids by July 7, 2020 and therefore did NOT sell.


    -Fred-

  • Used Weber Setup on Unknown Intake Manifold

    This used Weber setup and intake intake manifold is for sale by Ebay seller "columbo14 " with a Buy-It-Now of $2,500.00:

    Vintage Weber 8-Stack Set for Small Block Windsor Ford


    ~ Genuine Weber 44-IDF Carburetors Made in Italy.

    ~ Bought new as a complete set.

    ~ Properly tuned to its engine. (Never had to mess with them afterward).

    ~ As removed from running / driving modified HiPo 289.

    ~ Street driven 33K miles.(Mostly leaded V/P was used).

    ~ All fuel and air filters were well maintained.

    ~ Sold car as a roller. They have been in proper dry storage since.

    ~ Custom made 1” aluminum spacers.(Needed to clear stock valve covers with their own set of spacers).

    ~ Bell-Crank linkage is complete and operates smoothly.

    ~ Manifold has a threaded boss for a cable bracket. (That is not included).

    ~ Aeroquip / K&N /Arp / Correct low fuel pressure gauge. (Carbs only need 2 / 3 lbs. pressure).

    ~ Manifold was ported and bench flowed. (Approx. 1.25" wide x 2.00” high ports).

    ~ Mounting holes have been elongated a bit for milled heads & with intake studs.(flat washers cover).

    ~ Port runners are drilled / tapped for external Nitrous or DMV required pollution pcv emissions if needed.

    ~ Approx.10“ from top of intake to top of air filters.

    ~ Spare never needed Weber rebuild kits. Some extra base gaskets. Their tuned specs.

    ~ There are no other parts with this.

    ~ It will be well packed.


    *~ Please note ~*

    ~ I am listing this for another person.

    ~This all the information that he has given me.

    https://www.ebay.com/itm/Weber-44-I…PIAAOSwfWpfBGlp

    -Fred-

  • Rebuilt 4201-S Fuel Pump

    Make sure that you do your due diligence on this one. There are a lot of negative tells on this one although I may be the only one with the proper experience with these to recognize them.

    -Fred-

  • Rebuilt 4201-S Fuel Pump

    Here is an Ebay auction for a rebuilt 4201-S Hipo fuel pump by Ebay member "orlandomustang1966 " with a starting bid of $249.00:

    Orlando Mustang

    NOS Parts and Restoration

    66-67 Ford Carter Fuel Pump 289K Hi-PO - USED

    Fits Year (s): 66-67

    Description: Refurbished Carter 289K Fuel Pump. It includes unique button top relief valve.

    Not tested, expect buyer to rebuild.

    Casting # 4201

    Part # C6ZZ-9350-A

    0-1719

    Date: 9 7A

    Handle: 177-283

    Made in the USA

    https://www.ebay.com/itm/224070529313?ul_noapp=true

    -Fred-

  • Used 289 Carburetor Spacer Plate

    Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "kevinstang " with a starting bid of $49.99:

    Your bidding on this old original Ford 4 barrel carb spacer with the C30E-9A589-E part number marked on it as shown. Original to late 1963 and early 1964 289 V8 engines with the 4 barrel autolite 4100 carb and factory intake. Selling as I bought it- could use more cleaning, but overall not bad looking early part. According to books I have this spacer was used primarily on early 289 high performance engines in Fairlanes, Galaxies and Falcons and possibly some early 1964 1/2 Mustangs. Shoud fit and work with other year 289 -4V applications as well when a carb spacer is needed. Look at pictures carefully and bid accorgingly.

    https://www.ebay.com/itm/274420371565?ul_noapp=true

    -Fred-

  • NOS C5ZZ 15520 A Backup Light Switch

    This NOS C5ZZ 15520 A switch is back on Ebay again with a Buy-It-Now of $349.00 or make offer:

    https://www.ebay.com/itm/1642808581…em=164280858102

    -Fred-