Posts by C6ZZKGT

    This used FoMoCo Hipo distributor that was "no longer available" is back on Ebay again with no changes:

    Ford C5OF-12127-E HiPo 289 Dual Point Distributor ORIGINAL, Dated December 1964 | eBay

    -Fred-

    The listing for this used FoMoCo Hipo distributor was ended by the seller November 27, 2021 with the following explanation "This listing was ended by the seller because the item is no longer available".

    -Fred-

    This NOS C0AF 12152 A dual point distributor breaker plate sold November 26, 2021 on Ebay for $125.00.

    -Fred-

    Here is another Ebay auction for an NOS C0AF 12152 A dual point distributor breaker plate kit by Ebay member "mysunshine302" with starting bid of $100.00 and a Buy-It-Now of $125.00:

    !! Please take your time looking & read description fully !!

    **This is the Christmas Early Bird Special**

    You are bidding on a NOS service replacement dual point mechanical distributor breaker plate setup. #D1AZ-12A132-A supersede #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! This full package comes complete as seen with everything in the pictures. NOS Motorcraft two piece steel plate & NOS Motorcraft dual points DP-5 & NOS Ford condenser DC-6 & New hardware all installed. All looks *New. No *corrosion on dual points or condenser. Also including NOS Motorcraft package & Motorcraft installation paper.This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all mechanical / centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

    NOS HiPo 289 302 351 427 428 Single Too Dual Point Conversion Kit C0AF-12152-A | eBay

    -Fred-

    Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $60.00 and a Buy-It-Now of $80.00:

    !! Please take your time and look and read description fully !!

    **This is the Christmas Early Bird Special**                             

    You are bidding on (1) New 289 / 427 HiPo service replacement (K) & (W) code dual point mechanical /

    centrifugal distributor breaker plate & spacer. #D1AZ-12A132-A supersede #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! Comes complete as seen in pictures. Two piece steel plate & Ford Motorcraft original paper package. This is 100% correct for the *(K) code 289 HiPo dual point distributor part number C5OF-12127-E & *(W) code 427 HiPo dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane mechanical advance distributors. Also will work 100% as a conversion kit for any of these Ford V8 engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor housing: FoMoCo, Autolite & Motorcraft. Correct fit for the 1964 to 1974 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with a Ford V8 engines & Ford V8 distributors.

    289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

    -Fred-

    This NOS D1AZ 12A132 A dual point conversion kit sold November 26, 2021 on Ebay for $78.00.

    -Fred-

    Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $65.00 and a Buy-It-Now of $78.00:

    !! Please take your time and look and read description fully !!

    **This is the Christmas Early Bird Special**

    You are bidding on (1) New 289 / 427 HiPo service replacement (K) & (W) code dual point mechanical /

    centrifugal distributor breaker plate & spacer. #D1AZ-12A132-A supersede #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! Comes complete as seen in pictures. Two piece steel plate & Ford Motorcraft original paper package. This is 100% correct for the *(K) code 289 HiPo dual point distributor part number C5OF-12127-E & *(W) code 427 HiPo dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane mechanical advance distributors. Also will work 100% as a conversion kit for any of these Ford V8 engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor housing: FoMoCo, Autolite & Motorcraft. Correct fit for the 1964 to 1974 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with a Ford V8 engines & Ford V8 distributors.

    289 / 427 HiPo Dual Point Conversion Breaker Plate Motorcraft D1AZ-12A132-A | eBay

    -Fred-

    This Kar was bid to $1,325.00 by November 26, 2021 with 14 bids from 3 bidders and did not meet the sellers reserve and therefore did NOT sell.

    -Fred-

    Here is an Ebay auction for 8 NOS C9OZ 6A564 B push rod guide plates by Ebay member "magmustangs" with a starting bid of $289.00:

    1965-1968 Ford Mustang, Shelby GT350, GT40, Fairlane, Falcon, Ranchero, Custom, Galaxie, 500, LTD, Mercury Comet, Cyclone, Cougar. NEW OLD STOCK 289 VALVE PUSH ROD GUIDE PLATES (Set of 8 Guide Plates). Ford notes "Use with 351W cyl. heads". These are also commonly used for GT40 C6FE- heads and for improving 289 and HIPO heads. These are ORIGINAL FORD NOS PARTS. Stamped C9OX-B. Brand New In the boxes. Ready To Install. Impossible To Find NOS. Please email with questions. 111121-8 WE HAVE AN EBAY STORE WITH THOUSANDS OF ORIGINAL and NOS FORD PARTS. CHECK IT OUT.

    65-68 Ford Mustang Shelby GT40 Mercury NOS 289 Hipo VALVE PUSH ROD GUIDES 351W | eBay

    -Fred-

    These 8 NOS C9OZ 6A564 B push rod guide plates received no bids by November 25, 2021 and therefore did NOT sell.

    -Fred-

    These 8 NOS C9OZ 6A564 B push rod guide plates are back on Ebay again with no changes:

    65-68 Ford Mustang Shelby GT40 Mercury NOS 289 Hipo VALVE PUSH ROD GUIDES 351W | eBay

    -Fred-

    Here is an Ebay auction for 8 NOS C9OZ 6A564 B push rod guide plates by Ebay member "magmustangs" with a starting bid of $289.00:

    1965-1968 Ford Mustang, Shelby GT350, GT40, Fairlane, Falcon, Ranchero, Custom, Galaxie, 500, LTD, Mercury Comet, Cyclone, Cougar. NEW OLD STOCK 289 VALVE PUSH ROD GUIDE PLATES (Set of 8 Guide Plates). Ford notes "Use with 351W cyl. heads". These are also commonly used for GT40 C6FE- heads and for improving 289 and HIPO heads. These are ORIGINAL FORD NOS PARTS. Stamped C9OX-B. Brand New In the boxes. Ready To Install. Impossible To Find NOS. Please email with questions. 111121-8 WE HAVE AN EBAY STORE WITH THOUSANDS OF ORIGINAL and NOS FORD PARTS. CHECK IT OUT.

    65-68 Ford Mustang Shelby GT40 Mercury NOS 289 Hipo VALVE PUSH ROD GUIDES 351W | eBay

    -Fred-

    These 8 NOS C9OZ 6A564 B push rod guide plates received no bids by November 25, 2021 and therefore did NOT sell.

    -Fred-

    This NOS C3OZ 6256 A Hipo camshaft sprocket is back on Ebay again with no changes

    63-65 Ford Mustang Fairlane Shelby GT 350 Cobra NOS 289 HIPO CAMSHAFT SPROCKET | eBay

    -Fred-

    This NOS C3OZ 6256 A Hipo camshaft sprocket received no bids by November 25, 2021 and therefore did NOT sell.

    -Fred-

    This NOS C6ZZ 6540324 A rear tail lamp panel is back on Ebay again with no changes:

    C6ZZ-6540324-A NOS 1965 1966 SHELBY MUSTANG TAIL LIGHT PANEL, NEW | eBay

    -Fred-

    This NOS C6ZZ 6540324 A rear tail lamp panel received no bids by November 25, 2021 and therefore did NOT sell.

    -Fred-

    This used FoMoCo Hipo distributor sold November 25, 2021 on Ebay for $695.00.

    -Fred-

    This is an unusual C7OF 12127 K distributor for the 1967 model. You do not see many of these.

    -Fred-

    Here is an Ebay auction for a pair of NOS C5ZZ 5C299 A GT exhaust bezels by Ebay member "magmustangs " with a starting bid of $239.00:

    1965-1966 Ford Mustang GT, Fastback, Coupe, Convertible. New-Old-Stock LH+RH Pair of GT Rear Dual Exhaust Trumpet Trim Ring Mouldings with Attaching Hardware. These are ORIGINAL FORD NOS PARTS. Brand New Original Ford still in the boxes. Show Quality NOS Condition. Ready To Install. IMPOSSIBLE TO FIND ORIGINAL NOS. Please email with any questions. 121020-5RW WE HAVE AN EBAY STORE WITH THOUSANDS OF ORIGINAL FORD PARTS. CHECK IT OUT.

    1965 1966 Mustang GT Fastback Coupe Convertible NOS GT DUAL EXHAUST TRIM RINGS | eBay

    -Fred-

    Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "summitcoll-6" with a Buy-It-Now of $695.00 or make offer:

    Boss 302 ? distributor C50F-12131-B dual point Fomoco 289 Hi Po ? Shelby? oem.


    I just sold my 1970 Boss 302 Mustang and came across a box of parts the previous owner gave me.

    I described it as you see it. There are some photos of codes you can make larger and try to decode. I am not an expert at decoding Ford parts but it appears it is a 1965 part. C is decade 1960 and the 5 is the year. I included a screen shot of a decoder page.


    Other eBay ads for this part number mention hippo 289, Shelby and Boss Mustangs. Not sure if accurate or not.


    Kind of depending on the buyer to know exactly what it is and if it will work for their engine. Points look very clean. Not sure if it was rebuilt or not.

    Being sold as is with no warranty and no returns. Thank you for looking.

    Boss 302 ? distributor C50F-12131-B dual point Fomoco 289 Hi Po ? Shelby? oem | eBay

    -Fred-

    Here is an Ebay auction for a used carburetor spacer by Ebay member "gyrhead" with a Buy-It-Now of $42.99:

    Genuine Ford
    This is a 1 inch aluminum factory carb spacer for 64-67 289 4 barrel engines in Mustang, Cyclone, Cougar and more
    Has vacuum port for PCV or power brakes, and carries the C4OE-9A589-E engineering ID
    Ready to install. No gaskets or hardware is included.

    1964-67 Ford Mustang 289 4V Carburetor Spacer C4OE-9A589-E | eBay

    -Fred-

    This used carburetor spacer sold November 25, 2021 on Ebay for $42.99.

    -Fred-