Posts by C6ZZKGT

  • NOS C2OZ 6564 A Rocker Arm

    These NOS rocker arms received no bids by April 21, 2022 and therefore did NOT sell.

    -Fred-

  • Used Reproduction Exhaust Manifold

    This seller argues that the manifolds came off of a 66 Shelby and claiming it was Canadian built and these were original. I guess that he could not let his fish off of the line who was willing to pay $900.00 for them so he put them back on with the addendum of being a Canadian built car and sold them to his fish. He wanted me to prove that they are reproductions by showing him the original seller of reproduction manifolds. Whatever company produced these are long gone. I have seen at least 4 other versions from different producers and the only one that I know of currently is CAS. The buyer was definitely taken in this as the seller was stubborn in the face of the facts.

    On Apr-21-22 at 15:39:28 PDT, seller added the following information:

    NOTE*


    These manifolds came off of a Canadian built car.


    I have 2 more clear pictures of the casting #s, message me for the photos


    Thanks CJ


    OEM FORD Shelby 1965-1967 Mustang Hi-po HIPO K code Exhaust Manifolds 289 RARE | eBay


    -Fred-

  • Used Reproduction Exhaust Manifold

    Quote from C6ZZKGT
    Quote from C6ZZKGT

    Here is an Ebay auction for a pair of used reproduction Hipo exhaust manifolds by Ebay member "cj_moto" with a starting bid of $900.00:

    I purchased these K code HIPO Exhaust manifolds from an elderly fellow that took them off of his 1966 Shelby mustang in 1969, and replaced them with headers. He stumbled upon them while preparing to move years later. They are in near perfect condition considering they are 56 years old. These are OEM FORD, not reproductions.
    I have run a a straight edge on these and cannot find any signs of warpage, the castings are perfect, one manifold has one small impression (see picture).
    I have not seen an OEM set available for years, perfect for that correct restoration.
    These manifolds will ship from Canada, so ask for a quote prior to bidding.
    Any questions, feel free to message me.

    OEM FORD Shelby 1965-1967 Mustang Hi-po HIPO K code Exhaust Manifolds 289 RARE | eBay

    -Fred-

    I have already messaged the seller through the Ebay message system regarding the reproduction issue so we will see what happens. I do not recall seeing this exact reproduction before with the actual Ford part numbers and diamonds rather than engineering numbers. The other set that I saw with actual Ford part numbers had the normal dots. This makes at least 4 and possibly 5 different reproduction Hipo manifolds that I have seen or touched over the years. Amazingly, there is already one bid at $900 for these manifolds. I would be ecstatic to sell one of my original pairs for that kind of money.

    -Fred-

    This listing was ended by the seller April 21, 2020 with the following explanation "This listing was ended by the seller because there was an error in the listing".

    -Fred-

  • David Pfeiffer

    Quote from 1965 2+2

    Oh wow!

    I bought mine from Dave Wallace after he moved to Canada

    Flew up to Vancouver and drove it home to Louisiana.

    What an awesome trip

    Mine’s a Fastback! Yours?

    Dave Wallace did a really good job on your Kar. He did all of the research for Waldren to reproduce the Arvinode exhaust system. It was quite a story with a lot of pictures and even video.

    -Fred-

  • 5F08K777151 on Ebay

    The seller ended the listing for this 65 Mustang GT convertible April 20, 2022 with the following explanation "This listing was ended by the seller because the item is no longer available".

    -Fred-

  • NOS C5ZZ 3468 B Strut Rod

    This pair of NOS C5ZZ 3468 B strut rods sold April 20, 2022 on Ebay for $195.00.

    -Fred-

  • Used FoMoCo Hipo Distributor

    This used FoMoCo Hipo distributor sold April 20, 2022 on Ebay for $1,000.00.

    -Fred-

  • Used Reproduction Exhaust Manifold

    Quote from C6ZZKGT

    Here is an Ebay auction for a pair of used reproduction Hipo exhaust manifolds by Ebay member "cj_moto" with a starting bid of $900.00:

    I purchased these K code HIPO Exhaust manifolds from an elderly fellow that took them off of his 1966 Shelby mustang in 1969, and replaced them with headers. He stumbled upon them while preparing to move years later. They are in near perfect condition considering they are 56 years old. These are OEM FORD, not reproductions.
    I have run a a straight edge on these and cannot find any signs of warpage, the castings are perfect, one manifold has one small impression (see picture).
    I have not seen an OEM set available for years, perfect for that correct restoration.
    These manifolds will ship from Canada, so ask for a quote prior to bidding.
    Any questions, feel free to message me.

    OEM FORD Shelby 1965-1967 Mustang Hi-po HIPO K code Exhaust Manifolds 289 RARE | eBay

    -Fred-

    I have already messaged the seller through the Ebay message system regarding the reproduction issue so we will see what happens. I do not recall seeing this exact reproduction before with the actual Ford part numbers and diamonds rather than engineering numbers. The other set that I saw with actual Ford part numbers had the normal dots. This makes at least 4 and possibly 5 different reproduction Hipo manifolds that I have seen or touched over the years. Amazingly, there is already one bid at $900 for these manifolds. I would be ecstatic to sell one of my original pairs for that kind of money.

    -Fred-

  • Used Reproduction Exhaust Manifold

    Here is an Ebay auction for a pair of used reproduction Hipo exhaust manifolds by Ebay member "cj_moto" with a starting bid of $900.00:

    I purchased these K code HIPO Exhaust manifolds from an elderly fellow that took them off of his 1966 Shelby mustang in 1969, and replaced them with headers. He stumbled upon them while preparing to move years later. They are in near perfect condition considering they are 56 years old. These are OEM FORD, not reproductions.
    I have run a a straight edge on these and cannot find any signs of warpage, the castings are perfect, one manifold has one small impression (see picture).
    I have not seen an OEM set available for years, perfect for that correct restoration.
    These manifolds will ship from Canada, so ask for a quote prior to bidding.
    Any questions, feel free to message me.

    OEM FORD Shelby 1965-1967 Mustang Hi-po HIPO K code Exhaust Manifolds 289 RARE | eBay

    -Fred-

  • NOS C6ZZ 14401 F Main Wire Loom

    Quote from C6ZZKGT
    Quote from C6ZZKGT

    Here is an Ebay auction for an NOS C6ZZ 14401 F main wire loom by Ebay member "yergoj" with a starting bid of $2,500.00:

    NOS 1966 Ford Mustang Shelby main under dash dash wiring harness. This is new in original box pulled out to only take picture.

    NOS 1966 Ford Mustang Shelby main under dash dash wiring harness | eBay

    -Fred-

    This NOS C6ZZ 14401 F main wire loom received no bids by April 20, 2022 and therefore did NOT sell.

    -Fred-

    This NOS C6ZZ 14401 F main wire loom is back on Ebay again with no changes:

    NOS 1966 Ford Mustang Shelby main under dash dash wiring harness | eBay

    -Fred-

  • NOS C6ZZ 14401 F Main Wire Loom

    Quote from C6ZZKGT

    Here is an Ebay auction for an NOS C6ZZ 14401 F main wire loom by Ebay member "yergoj" with a starting bid of $2,500.00:

    NOS 1966 Ford Mustang Shelby main under dash dash wiring harness. This is new in original box pulled out to only take picture.

    NOS 1966 Ford Mustang Shelby main under dash dash wiring harness | eBay

    -Fred-

    This NOS C6ZZ 14401 F main wire loom received no bids by April 20, 2022 and therefore did NOT sell.

    -Fred-

  • Used C5DA Bellhousing

    Quote from C6ZZKGT

    Here is an Ebay auction for a used C5DA bellhousing by Ebay member "ne-performance-mustang" with a Buy-It-Now of $325.65 or make offer:

    This bellhousing is concours correct to 1965 to 1968 Ford and Mercury vehicles with 289 302 V8 6 bolt engine with small 157 tooth flywheel. All other threaded holes have been checked as are good.

    Later Ford engines can utilize this bellhousing if the clutch fork fulcrum is changed from early style to later style. We also sell this later style fulcrum is you need one. This bellhousing will also fit 250 6 cyl engine and all 1965 to 1973 Ford and Mercury vehicles.

    1965 1966 1967 1968 Ford Mustang SBF Bellhousing 289 302 351 6 bolt 157 Tooth | eBay

    -Fred-

    This used C5DA bellhousing sold April 20, 2022 on Ebay for $325.65.

    -Fred-

  • 5F09K749605 on Ebay

    This 65 Mustang Fastback Rangoon Red with black standard interior that was "no longer available" is back on Ebay again as a reserve price auction with a starting bid of $10,000.00:

    Vehicle Original VIN : 5F09K749605

    There's a hierarchy when it comes to 1965 Ford Mustangs, and the 2+2 with the K-Code HiPo 289 is king. This was the inaugural year for the highly sought-after fastback body, and this is a comprehensively restored example that has a very correct look and some exciting documentation. It all makes this exceptional coupe in its own league of extraordinary.

    We're told this coupe has a frame-off restoration completed in 2002, and the level of quality and care since continues to give it an exceptional style For example, the factory-correct Rangoon Red has the kind of smooth shine that lets the sunlight roll evenly across the well-fitting body panels. This is important, because after all, we are looking at the first-ever fastback pony car. Something this significant also gets its details right. The trim is complete and brightly shining; the gaps are tight and uniform; and the doors have a smooth and confident action. And while K-code cars have a rarity by the handful, these fastbacks are usually in GT spec. So it makes this standard standard-spec K-code coupe the kind of uniqueness that gets singled out by true enthusiasts. And besides, with the correct styled steel wheels and double redline tires coordinating with the paint, this fastback car is not lacking speedy style.

    The factory-correct black interior is arguably the most attractive package against the bold exterior red. And just like the outside, there was a solid investment inside to give you an inviting atmosphere with like-new fundamentals that include the clean upholstery, plush carpeting, and smooth panels. You'll love it down to details like the working AM radio and the courtesy lights that greet you when the door opens. This has a desirable center console, and boldly protruding from the center is the stick shift. That will be your favorite place for your right hand, and your left one will love the gloss black classic steering wheel. Beyond that is the desirable optional Rally Pac tach and clock on the steering column.

    As much as you'll love the interior and exterior, it's the rare K-code HiPo 289 cubic-inch V8 under the hood that will impress even the most fickle Mustang enthusiast. It's the motor that took home the trophies around the globe, and so it's great to have it so well presented here. That's why you have nice details, like correct 1965 K-code castings for the four-barrel carburetor, intake, and four-speed manual transmission (these items are correct for the car, but are not confirmed original.) The Ford nine-inch rear end is also right for the HiPo car, and it has versatile 3.50 gears to give it plenty of punch around town but still cruises reasonably at highway speeds.

    You're going to really want to take a look over every inch of this car. It shows a detailed restoration, right down to the clean red oxide paint underneath. It's an impressive car that even comes with the window sticker and owner's manual. Rare opportunities like this are fleeting, and forever regretted when missed, so call today!

    1965 Ford Mustang Fastback K - Code | eBay

    -Fred-

  • 5F09K749605 on Ebay

    Quote from C6ZZKGT

    65 Mustang Fastback Rangoon Red with black standard interior is for sale by Ebay seller "streetsideclassiccars" as a Classified with a price of $99,995.00 or make offer:

    Description coming soon, call for details!

    1965 Ford Mustang Fastback K - Code | eBay

    -Fred-

    The listing for this 65 Mustang Fastback Rangoon Red with black standard interior was ended by the seller April 20, 2022 with the following explanation "This listing was ended by the seller because the item is no longer available".

    -Fred-

  • Used COBRA Dual Quad Intake Manifold

    Quote from C6ZZKGT

    Here is an Ebay auction for a used COBRA dual quad intake manifold by Ebay member "68fordranchero " with a Buy-It-Now of $1,600.00 or make offer:

    Ford OEM shelby Cobra dual quad aluminum intake. Original ford over the counter intake. Came off a running driving car and didn’t have any issues. Was bead blasted.

    Ford OEM shelby Cobra dual quad aluminum intake | eBay

    -Fred-

    The listing for this used COBRA dual quad intake manifold was ended by the seller April 20, 2022 with the following explanation "This listing was ended by the seller because there was an error in the listing".

    -Fred-

  • Used C5DA Bellhousing

    This used C5DA bellhousing w/spacer plate is back on Ebay again with no changes:

    65 66 1965 1966 Ford Mustang Shelby 6 Bolt Bell Housing C5DA w/spacer plate | eBay

    -Fred-

  • Used C5DA Bellhousing

    This used C5DA bellhousing w/spacer plate received no bids by April 20, 2021 and therefore did NOT sell.

    -Fred-

  • NOS C4DZ 3078 A 65/66 Mustang Lower Control Arm

    Quote from C6ZZKGT

    Here is an Ebay auction for a pair of NOS C4DZ 3078 A 65/66 Mustang lower control arms by Ebay member "westcoastclassicinc" with a starting bid of $1.00:

    Very rare find. These have a 1980 manufacture date so they still retain the unique paint and "jacking tabs" that were used in conjunction with the early alignment racks. Don Rush - West Coast Classic Cougar

    1964 1965 1966 Ford Mustang Shelby FoMoCo Falcon NOS Original Lower Control Arms | eBay

    -Fred-

    This pair of NOS C4DZ 3078 A 65/66 Mustang lower control arms sold April 8, 2022 on Ebay for $635.00 with 17 bids from 11 bidders.

    -Fred-

  • NOS C4DZ 3078 A 65/66 Mustang Lower Control Arm

    Here is an Ebay auction for a pair of NOS C4DZ 3078 A 65/66 Mustang lower control arms by Ebay member "westcoastclassicinc" with a starting bid of $1.00:

    Very rare find. These have a 1980 manufacture date so they still retain the unique paint and "jacking tabs" that were used in conjunction with the early alignment racks. Don Rush - West Coast Classic Cougar

    1964 1965 1966 Ford Mustang Shelby FoMoCo Falcon NOS Original Lower Control Arms | eBay

    -Fred-