Posts by C6ZZKGT

    This set of 4 NOS C6ZZ 1210 A wheel trim rings sold September 13, 2023 on Ebay for $975.00.

    -Fred-

    Here is an Ebay auction for a set of four NOS C6ZZ 1210 A wheel trim rings by Ebay member "crimsonliontradingcompany" with a starting bid of $975.00:

    Rare New Old Stock 1966 Ford Mustang wheel trim rings. In their original boxes. Very hard to find a set of 4.

    NO INTERNATIONAL SHIPPING. Sorry.

    This is an incredibly nice set of trim rings. As with most NOS Ford parts, they aren’t perfect. But as nice as I’ve seen. Check out the many pictures for condition. I’ll throw in an extra OEM trim ring for your spare tire in driver condition. So 4 NOS trim rings and one used trim ring.


    No returns. No warranty. Please review the pictures and ask any questions.


    Please check my feedback and bid with confidence. I’ve been buying and selling classic mustang parts for more than 22 years.

    NOS OEM Ford 1966 Mustang + Fairlane Styled Steel Wheel Trim Ring Set (4) GT 14" | eBay

    -Fred-

    Here is an Ebay reserve price auction for a used C5AE bare block by Ebay member "okeeracer" with a starting bid of $9.99:

    You are bidding on a standard bore 289 HIPO block that has been sitting for over 45 years. It has a corner that is missing, see pic. This is all we know from the guy that had it for all those years. We will bring it to fall 2023 Carlisle, PA, or Thanksgiving Columbus. Pick up is available in Detroit, MI suburb. NO SHIPPING AVAILABLE. High bidder pays shipping and handling. I will only ship in United States. If you do not have a shipping address in the United States, please do not bid on auction.

    Shelby / Mustang 4K22 Dated 289 HIPO Block Standard Bore | eBay

    -Fred-

    I requested a couple of better pictures of the missing chunk of the casting and of the rear main cap two days ago and they have not yet responded. "Caveat Emptor" on this block at this time.

    -Fred-

    Here is an Ebay reserve price auction for a used C5AE bare block by Ebay member "okeeracer" with a starting bid of $9.99:

    You are bidding on a standard bore 289 HIPO block that has been sitting for over 45 years. It has a corner that is missing, see pic. This is all we know from the guy that had it for all those years. We will bring it to fall 2023 Carlisle, PA, or Thanksgiving Columbus. Pick up is available in Detroit, MI suburb. NO SHIPPING AVAILABLE. High bidder pays shipping and handling. I will only ship in United States. If you do not have a shipping address in the United States, please do not bid on auction.

    Shelby / Mustang 4K22 Dated 289 HIPO Block Standard Bore | eBay

    -Fred-

    The seller ended this listing September 13, 2023 with the following explanation "This listing was ended by the seller because there was an error in the listing".

    -Fred-

    This rebuilt C4OE 8505 A Hipo water pump sold September 14, 2023 for $317.63.

    -Fred-

    This NOS D1AZ 12A132 A dual point conversion kit received no bids by September 13, 2023 and therefore did NOT sell.

    -Fred-

    Here is an Ebay auction for a used C5ZZ 4602 E Hipo 289 driveshaft by Ebay member "aboss429atao" with a starting bid of $495.00:

    This listing for a good used original Ford driveshaft for a 1965 1966 Ford Mustang and Shelby GT350 with a 289 HiPo and 9" rear end. This is Ford part number C5ZZ-4602-E and measures 49 23/32" center to center. This is the driveshaft alone without the slip yoke. Originals like this are difficult to find. PLEASE CHECK OUT MY EBAY STORE FOR ADDITIONAL FORD PARTS AND ACCESSORIES. Buyer to pay for shipping. Thank you and happy ebaying. (NewStorageBldg-BulkD)

    Original 1965 1966 Ford Mustang & Shelby GT350 289 HiPo Driveshaft | eBay

    -Fred-

    Please note the following in regards to the proper application. This driveshaft uses the Mechanics type of U-Joints with inside clips. The application varies with your Kars production date.

    The Ford MPC states that 289 Special drive shafts before 10/5/64 used the outside clips. These are considered to be Ford rather than Mechanics type U-Joints as Mechanics type use inside clips. Hopefully this ends the confusion on this.

    -Fred-

    Here is an Ebay auction for a used C5ZZ 4602 E Hipo 289 driveshaft by Ebay member "aboss429atao" with a starting bid of $495.00:

    This listing for a good used original Ford driveshaft for a 1965 1966 Ford Mustang and Shelby GT350 with a 289 HiPo and 9" rear end. This is Ford part number C5ZZ-4602-E and measures 49 23/32" center to center. This is the driveshaft alone without the slip yoke. Originals like this are difficult to find. PLEASE CHECK OUT MY EBAY STORE FOR ADDITIONAL FORD PARTS AND ACCESSORIES. Buyer to pay for shipping. Thank you and happy ebaying. (NewStorageBldg-BulkD)

    Original 1965 1966 Ford Mustang & Shelby GT350 289 HiPo Driveshaft | eBay

    -Fred-

    Here is an Ebay auction for a used reproduction C5DA Cobra scatter shield bellhousing by Ebay member "willgames10" with a starting bid of $1,000.00:

    This high-quality cast iron NHRA Bell Housing is perfect for any Ford Shelby Cobra 289,302,351w owner looking to upgrade their transmission and drivetrain. Designed with performance in mind, this vintage part is a must-have for any racing enthusiast.


    Crafted with precision and attention to detail, this Bell Housing is compatible with a variety of Ford models and delivers exceptional power and durability. Whether you're hitting the track or cruising on the highway, you can trust this Bell Housing to deliver the performance you need. So why wait? Upgrade your transmission and drivetrain with this top-of-the-line Bell Housing today and experience the difference for yourself!

    Ford Shelby Cobra 289,302,351w Cast Iron NHRA Bell Housing | eBay

    -Fred-

    I posted this as a reproduction based on the information from forum member GUNTRUCKER which is 5 posts above this one.

    Quote
    Quote
    The one sold by 1rockingd was an original. The one sold by v8er was a reproduction.
    Thanks for the update on this. The buyers would have been more up to speed before purchasing, if they had read this thread. The buyers probably are not on this forum. We appreciate your education on these.

    -Fred-

    Yes, thanks, one easy way to tell if a Cobra 6-bolt is original or reproduction is by the part number embossed inside. Originals have dashes between the numbers. Reproductions have no dashes. I hope this will keep somebody from buying a reproduction advertised as original.

    -Fred-

    Here is an Ebay auction for a used reproduction C5DA Cobra scatter shield bellhousing by Ebay member "willgames10" with a starting bid of $1,000.00:

    This high-quality cast iron NHRA Bell Housing is perfect for any Ford Shelby Cobra 289,302,351w owner looking to upgrade their transmission and drivetrain. Designed with performance in mind, this vintage part is a must-have for any racing enthusiast.


    Crafted with precision and attention to detail, this Bell Housing is compatible with a variety of Ford models and delivers exceptional power and durability. Whether you're hitting the track or cruising on the highway, you can trust this Bell Housing to deliver the performance you need. So why wait? Upgrade your transmission and drivetrain with this top-of-the-line Bell Housing today and experience the difference for yourself!

    Ford Shelby Cobra 289,302,351w Cast Iron NHRA Bell Housing | eBay

    -Fred-

    This NOS C5ZZ 6540544 B rear lower valance is back on Ebay again with a new lower starting bid of $180.00:

    1965-66 NOS Mustang & Shelby GT350 Standard Rear Valance - No Lamps | eBay

    -Fred-

    This NOS C5ZZ 6540544 B rear lower valance received no bids by September 14, 2023 and therefore did NOT sell.

    -Fred-

    Here is an Ebay auction for a used C3OZ 8592 A thermostat housing by Ebay member "barry4953" with a starting bid of $38.00:

    Here is an original Ford thermostat housing from an early D Code 4V 289 c.i. engine. Not sure if this exact one was ever used on a Shelby or a HiPo engine or not. Still retains its original black paint. Very minimal pitting - mostly internal and where the hose would hide it. Mounting surface is good. Was installed on a running engine in a 1964 1/2 Mustang. Impossible to find these days!

    1964 1965 Mustang Shelby 289 Thermostat Housing C4OE-3594A | eBay

    -Fred-

    Does anyone know where to get a vacuum block off? I have the correct distributor with vac cannister.

    Dave

    The correct distributor will NOT have a provision for a vacuum advance unit. I have seen where people have modified the casting to eliminate the attaching points for the vacuum advance unit and then filled in the hole for the arm that connects to the points plate. Then they added the dual point setup to make it appear correct. Keep in mind that the dual point setup is not the only change frrom single point to dual point. The distributor cam is also different as it controls the total advance characteristics.

    What distributor do you actually have? Is it FoMoCo, Autolite or Motorcraft?

    The only distributor for our Kars that had the provision for a vacuum advance but never had one was the, last hurrah, Motorcraft Hipo distributor that Ford offered in the 80's. Ford ran out of dual point castings and that was a single point casting that had a special plate that Ford used to cover the mounting points for the vacuum advance and the hole for the arm. Ford did not stamp the C5OF 12127 E number or date code on the distributor but rather stamped that number and date code on a separate tag that was screwed on with that special cover. Maybe that cover plate is what you are seeking if you have one of those late production Motorcraft distributors?

    -Fred-

    Here is an Ebay auction for an NOS C6ZZ 8213 B 1966 GT grille ornament by Ebay member "guilol" with a Buy-It-Now of $146.66:

    Part Is UNUSED, New Old Stock, In Original ROUGH Box!Part Needs A Proper Light Cleaning And Polishing!

    1966 Ford Mustang #C6ZZ-8273-B Grill Ornament And Medallion Assermbly NOS unused | eBay

    -Fred-

    This NOS C6ZZ 8213 B 1966 GT grille ornament sold September12, 2023 on Ebay for $146.66.

    -Fred-

    Here is an Ebay auction for an NOS C5OZ 12127 E Motorcraft Hipo distributor by Ebay member "justntime2010" with a Buy-It-Now of $999.00 or make offer:

    New in box Ford motor company Motorcraft distributor new in box.I do not take returns so make sure this is what you need match your part numbers. Thanks for looking I appreciate it. If you have any questions please ask before you bid.

    289 HiPo (K) dual point Motorcraft distributor C50F-12127-E Mustang Shelby Cobra | eBay

    -Fred-

    This NOS C5OZ 12127 E Motorcraft Hipo distributor sold September 12, 2023 on Ebay for $799.00.

    -Fred-

    Here is an Ebay auction for an NOS C3OZ 13341 B turn signal switch by Ebay member "minisparts" with a Buy-It-Now of $149.00 or make offer:

    NOS 1962-1965 FORD MUSTANG FALCON FAIRLANE TURN SIGNAL SWITCH C3OZ-13341-B. Shipped with USPS First Class.

    NOS 1962-1965 FORD MUSTANG FALCON FAIRLANE TURN SIGNAL SWITCH C3OZ-13341-B | eBay

    -Fred-

    This NOS C3OZ 13341 B turn signal switch sold September 12, 2023 on Ebay for $149.00.

    -Fred-

    Here is an Ebay auction for a used C5AE PCV valve by Ebay member "orlandomustang1966" with a starting bid of $75.00:

    • Description: Used 1965-1966 Shelby GT350 or Mustang PCV Valve. See Photos for Condition.
    • Fits year(s): 1965-1966
    • Models: Shelby GT350 | Mustang
    • Engine: V8
    • Ford Engineering # C5AE-6A666-A
    • Condition: Used
    • Tested: No
    • Quantity: 1

    1965-1966 Shelby GT350 PCV Valve C5AE-6A666-A 8 Cyl OEM Original #6117 | eBay

    -Fred-

    This used C5AE PCV valve received no bids by September 2, 2023 and therefore did NOT sell.

    -Fred-

    This used C5AE PCV valve is back on Ebay again with the same starting bid of $75.00:

    1965-1966 Shelby GT350 PCV Valve C5AE-6A666-A 8 Cyl OEM Original #6117 | eBay

    -Fred-

    This listing for this 65 Mustang Fastback Rangoon Red with black standard interior was ended by the seller September 11, 2023 with the following explanation "This listing was ended by the seller because the item is no longer available".

    -Fred-