Posts by C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used C5ZZ 9A700 A choke cable mounting bracket by Ebay member "magmustangs" with a starting bid of $149.00:

1964.5-1967 Ford Mustang, Fastback, Convertible, Coupe, GT, Shelby GT350. Dash Choke Cable Mounting Bracket for cars equipped with 289 HIPO engine. This is an ORIGINAL FORD PART. Removed from a 1966 Mustang Fastback with 289 Hipo. The Bracket is in Great Original Condition. No Rust. Mounting Tab and holes are Great. It is Factory Straight. No Cracks, Splits or Damage. Overall, this is a Great Original 289 Hipo Choke Cable Bracket. Impossible To Find Original.

1964 1/2 1965 1966 1967 Mustang GT Shelby ORIG 289 HIPO CHOKE CABLE DASH BRACKET | eBay

-Fred-

This used C5ZZ 9A700 A choke cable mounting bracket sold October 2, 2023 on Ebay for $149.00.

-Fred-

Here is an Ebay auction for a used C5ZZ 9A700 A choke cable mounting bracket by Ebay member "magmustangs" with a starting bid of $149.00:

1964 1/2 1965 1966 1967 Mustang GT Shelby ORIG 289 HIPO CHOKE CABLE DASH BRACKET | eBay

-Fred-

Here is an Ebay auction for one NOS C5ZZ 6038 A Hipo motor mount insulator by Ebay member "musclecaruniverse" with a Buy-It-Now of $135.00 or make offer:

AN ORIGINAL NOS NEW OLD STOCK FORD 65 MUSTANG OR SHELBY GT350 289 HI PO ENGINE INSULAROR MOUNT

FITS RIGHT OER LEFT

NEW ORIGINAL...NOT REPRODUCTION.... PART NEVER USED OR INSTALLED

YOU ARE BUYING ONE UNLESS YOU SELECT MORE

PART NUMBER: C5ZZ-6038-A

PLEASE CONFIRM FITMENT PRIOR TO PURCHASE AND WE ENCOURAGE QUESTIONS AND WILL BE HAPPY TO PROVIDE MORE PICTURES ETC FOR MAKE SURE THE PART IS CORRECT FOR YOUR APPLICATION

PLEASE READ DESCRIPTION AND OUR POLICIES PRIOR TO BIDDING/BUYING

NOS PARTS

ALL OF OUR NEW OR NEW OLD STOCK PARTS ARE LISTED TO BEST OF OUR KNOWLEDGE & RESEARCH. NOS DOES NOT MEAN PERFECT. SOME OF OUR NOS PARTS HAVE SHELF WEAR OR ARE MISSING THE ORIGINAL BOXES. PLEASE MAKE SURE THAT THE PART NUMBER OR APPLICATION IS CORRECT FOR YOU.

1965 FORD MUSTANG GT SHELBY NOS 289 HI-PO ENGINE MOUNT INSULATOR C5ZZ-6038-A | eBay

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a set of used Hipo main bearing caps by Ebay member "popsotto" with a starting bid of $100.00:

Ford 289 HiPo 5 main caps, K code, Shelby GT350

Original set of 289 HiPo main bearing caps including the correct rear main that many sets are missing

#1 cap has some rust pits

#2 cap has some minor rust pits

They have been sandblasted to show clear view.

These have to be align bored to the block they are installed on.

The #2 cap minor pits should be pretty well removed when align bored

The #1 cap pits well be removed to some degree but some will probably remain.

There will still be plenty of unblemished area to add the correct support for the bearing

If in doubt ask your machine shop.

any questions ask

Ford 289 Hi-Po Main Caps Shelby GT350, K code | eBay

-Fred-

Display More

This set of used Hipo main bearing caps sold October 1, 2023 on Ebay for $1,032.57 with 46 bids from 13 bidders.

-Fred-

Here is an Ebay auction for a set of used Hipo main bearing caps by Ebay member "popsotto" with a starting bid of $100.00:

Ford 289 HiPo 5 main caps, K code, Shelby GT350

Original set of 289 HiPo main bearing caps including the correct rear main that many sets are missing

#1 cap has some rust pits

#2 cap has some minor rust pits

They have been sandblasted to show clear view.

These have to be align bored to the block they are installed on.

The #2 cap minor pits should be pretty well removed when align bored

The #1 cap pits well be removed to some degree but some will probably remain.

There will still be plenty of unblemished area to add the correct support for the bearing

If in doubt ask your machine shop.

any questions ask

Ford 289 Hi-Po Main Caps Shelby GT350, K code | eBay

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for 8 used Hipo connecting rods by Ebay member "popsotto" with a starting bid of $200.00:

Ford, Shelby GT350, 1965-66 289 HIPO Rods

These are genuine hard to find 65-66 HiPo rods with the correct square head bolts

These have the oil squirt hole in them for extra oiling the rod bearing

The rods are Resized and Balanced for matched weight

These can be also used with a Boss 302 motor

!965 - 67 Square head 3/8” bolts

Ford 289 HiPo Connecting Rods Shelby GT350, K code | eBay

-Fred-

Display More

These 8 used Hipo connecting rods sold October 1, 2023 on Ebay for $697.00 with 22 bids from 9 bidders.

-Fred-

Here is an Ebay auction for 8 used Hipo connecting rods by Ebay member "popsotto" with a starting bid of $200.00:

Ford, Shelby GT350, 1965-66 289 HIPO Rods

These are genuine hard to find 65-66 HiPo rods with the correct square head bolts

These have the oil squirt hole in them for extra oiling the rod bearing

The rods are Resized and Balanced for matched weight

These can be also used with a Boss 302 motor

!965 - 67 Square head 3/8” bolts

Ford 289 HiPo Connecting Rods Shelby GT350, K code | eBay

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "mustangmasters428" with a starting bid of $495.00:

Here we have a good used C5OF FoMoCo Dual Point Distributor for a 289 High Performance engine, commonly used in Mustangs, Fairlane's, and Cyclones with these special 271 horsepower motors. Standard distributors were equipped with a vacuum advance pod on the side. These stock units had only 1 set of points unlike these high performance units which used 2 sets to get a hotter spark for increased performance. They also had a sleek distinctive look with NO vacuum advance.

This original distributor has some minor cosmetic issues although there are no extra holes or any modifications. You will find it is in good used working condition although we do suggest you use your judgement before installing. The lobes are crisp to snap both sets of points open as designed. No excessive play in the shaft, this unit has no visible signs of gouges, welds, or repairs. This piece can be used as is for a survivor car or could be a perfect candidate for a K code classic restoration.

This unit has the factory part number of C5OF-12127-E which was for the 65 66 models with a stamped date of 0F10 (Just in 1965 dated distributor as well as whole motor and coupe with original 9 inch rear.) Should this not be correct for your car we also have several other factory dual points available. Please check your application and if you are a high end show car owner please realize you might give extra time to function and or detail to meet your higher standards.

A great distributor for that buyer completing his motor whether it be on an engine stand or in a GT Fastback, even a Shelby clone. It's the real deal for those who own a 289 HiPo equipped Mustang or Fairlane. This is your distributor, don't miss out!

289 HiPo Shelby Mustang FoMoCo Dual Point Distributor C5OF 12127 E | eBay

-Fred-

Display More

Make sure that you read the description carefully and look closely at the pictures. One extra note is that the area where the distributor cap sits is out of round from possibly having been dropped.

-Fred-

Display More

This used FoMoCo Hipo distributor sold October 1, 2023 on Ebay for $560.00 with 3 bids by 2 bidders.

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "mustangmasters428" with a starting bid of $495.00:

Here we have a good used C5OF FoMoCo Dual Point Distributor for a 289 High Performance engine, commonly used in Mustangs, Fairlane's, and Cyclones with these special 271 horsepower motors. Standard distributors were equipped with a vacuum advance pod on the side. These stock units had only 1 set of points unlike these high performance units which used 2 sets to get a hotter spark for increased performance. They also had a sleek distinctive look with NO vacuum advance.

This original distributor has some minor cosmetic issues although there are no extra holes or any modifications. You will find it is in good used working condition although we do suggest you use your judgement before installing. The lobes are crisp to snap both sets of points open as designed. No excessive play in the shaft, this unit has no visible signs of gouges, welds, or repairs. This piece can be used as is for a survivor car or could be a perfect candidate for a K code classic restoration.

This unit has the factory part number of C5OF-12127-E which was for the 65 66 models with a stamped date of 0F10 (Just in 1965 dated distributor as well as whole motor and coupe with original 9 inch rear.) Should this not be correct for your car we also have several other factory dual points available. Please check your application and if you are a high end show car owner please realize you might give extra time to function and or detail to meet your higher standards.

A great distributor for that buyer completing his motor whether it be on an engine stand or in a GT Fastback, even a Shelby clone. It's the real deal for those who own a 289 HiPo equipped Mustang or Fairlane. This is your distributor, don't miss out!

289 HiPo Shelby Mustang FoMoCo Dual Point Distributor C5OF 12127 E | eBay

-Fred-

Display More

Make sure that you read the description carefully and look closely at the pictures. One extra note is that the area where the distributor cap sits is out of round from possibly having been dropped.

-Fred-

Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "mustangmasters428" with a starting bid of $495.00:

Here we have a good used C5OF FoMoCo Dual Point Distributor for a 289 High Performance engine, commonly used in Mustangs, Fairlane's, and Cyclones with these special 271 horsepower motors. Standard distributors were equipped with a vacuum advance pod on the side. These stock units had only 1 set of points unlike these high performance units which used 2 sets to get a hotter spark for increased performance. They also had a sleek distinctive look with NO vacuum advance.

This original distributor has some minor cosmetic issues although there are no extra holes or any modifications. You will find it is in good used working condition although we do suggest you use your judgement before installing. The lobes are crisp to snap both sets of points open as designed. No excessive play in the shaft, this unit has no visible signs of gouges, welds, or repairs. This piece can be used as is for a survivor car or could be a perfect candidate for a K code classic restoration.

This unit has the factory part number of C5OF-12127-E which was for the 65 66 models with a stamped date of 0F10 (Just in 1965 dated distributor as well as whole motor and coupe with original 9 inch rear.) Should this not be correct for your car we also have several other factory dual points available. Please check your application and if you are a high end show car owner please realize you might give extra time to function and or detail to meet your higher standards.

A great distributor for that buyer completing his motor whether it be on an engine stand or in a GT Fastback, even a Shelby clone. It's the real deal for those who own a 289 HiPo equipped Mustang or Fairlane. This is your distributor, don't miss out!

289 HiPo Shelby Mustang FoMoCo Dual Point Distributor C5OF 12127 E | eBay

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is an Ebay auction for a pair of used C5OE heads by Ebay member "popsotto" with a starting bid of $300.00:

Ford Shelby GT350 HiPo heads 1965 – 67

289 HiPo heads with screw in rocker studs and valve spring pockets

Number 19 and 20 head casting numbers

Push rod slots are in good shape

2” intakes 1.65 exhaust Intake valve has GM on it.

One cylinder had a broken ring and left small dents in #1 head area as seen in the picture.

No cracks just cosmetic it did not hurt the valve seat but did chip the outside edge of the valve.

One head has had 8 guides replaced, but both heads have tight guides and no sign of oil going past them.

These had the old style rubber cap valve seals on them and looked to work fine.

Heads have a mild professional porting done on them.

The intakes ports line up with the gasket as a match port.

The exhaust ports are a little bigger and were probably used with headers.

1 screw in stud pedestal has been repaired with #99 high nickel cast iron weld and retreaded

Obviously was installed with an impact wrench and chipped a piece out

Pedestal crack was only on the to surface and did not go into the head.

Both heads were checked for cracks and are good to use

Any Questions...ASK

1965-67 Hi PO 289 Ford Cylinder Heads. Screw in Rocker Studs ! | eBay

-Fred-

Display More

The seller is very forthright in their description as they try to cover all possible issues. These heads are good for a modified engine and for someone who recognizes how to work with any of the issues mentioned in the ad.

-Fred-

Display More

This pair of used C5OE heads sold October 1, 2023 on Ebay for $1,026.10 with 21 bids from 8 bidders.

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a pair of used C5OE heads by Ebay member "popsotto" with a starting bid of $300.00:

Ford Shelby GT350 HiPo heads 1965 – 67

289 HiPo heads with screw in rocker studs and valve spring pockets

Number 19 and 20 head casting numbers

Push rod slots are in good shape

2” intakes 1.65 exhaust Intake valve has GM on it.

One cylinder had a broken ring and left small dents in #1 head area as seen in the picture.

No cracks just cosmetic it did not hurt the valve seat but did chip the outside edge of the valve.

One head has had 8 guides replaced, but both heads have tight guides and no sign of oil going past them.

These had the old style rubber cap valve seals on them and looked to work fine.

Heads have a mild professional porting done on them.

The intakes ports line up with the gasket as a match port.

The exhaust ports are a little bigger and were probably used with headers.

1 screw in stud pedestal has been repaired with #99 high nickel cast iron weld and retreaded

Obviously was installed with an impact wrench and chipped a piece out

Pedestal crack was only on the to surface and did not go into the head.

Both heads were checked for cracks and are good to use

Any Questions...ASK

1965-67 Hi PO 289 Ford Cylinder Heads. Screw in Rocker Studs ! | eBay

-Fred-

Display More

The seller is very forthright in their description as they try to cover all possible issues. These heads are good for a modified engine and for someone who recognizes how to work with any of the issues mentioned in the ad.

-Fred-

Here is an Ebay auction for a pair of used C5OE heads by Ebay member "popsotto" with a starting bid of $300.00:

Ford Shelby GT350 HiPo heads 1965 – 67

289 HiPo heads with screw in rocker studs and valve spring pockets

Number 19 and 20 head casting numbers

Push rod slots are in good shape

2” intakes 1.65 exhaust Intake valve has GM on it.

One cylinder had a broken ring and left small dents in #1 head area as seen in the picture.

No cracks just cosmetic it did not hurt the valve seat but did chip the outside edge of the valve.

One head has had 8 guides replaced, but both heads have tight guides and no sign of oil going past them.

These had the old style rubber cap valve seals on them and looked to work fine.

Heads have a mild professional porting done on them.

The intakes ports line up with the gasket as a match port.

The exhaust ports are a little bigger and were probably used with headers.

1 screw in stud pedestal has been repaired with #99 high nickel cast iron weld and retreaded

Obviously was installed with an impact wrench and chipped a piece out

Pedestal crack was only on the to surface and did not go into the head.

Both heads were checked for cracks and are good to use

Any Questions...ASK

1965-67 Hi PO 289 Ford Cylinder Heads. Screw in Rocker Studs ! | eBay

-Fred-

Here is an Ebay auction for an NOS C0AF 12152 A dual point distributor breaker plate by Ebay member "brandongokart" with a Buy-It-Now of $99.95:

This is a nos plate for a dual point distributor, used in many high performance fords please feel free to ask any questions

1962-1973 Ford Hipo 289-302 427 Dual Point Breaker Plate Assembly Nos Original | eBay

-Fred-

Here is an Ebay auction for a used Autolite Hipo distributor by Ebay member "relaytam" with a Buy-It-Now of $799.00:

289 HiPo Dual Point Distributor C5OF-12127-E 1965-66 Mustang & Shelby K-Code | eBay

-Fred-

Here is an Ebay auction for an NOS C5ZZ 16228 B Hipo fender emblem by Ebay member "lovethosefords" with a Buy-It-Now of $125.00:

NOS 65 66 Mustang High Performance Fender Badges C5ZZ-16228-B | eBay

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for an NOS C6ZZ 6540324 A 65/66 Mustang rear body tail lamp panel by Ebay member "wunderwerks" with a Buy-It-Now of $485.00:

Had this stored for 40 years plus. Never needed it for one of my cars. Time to let it go. It is packed in a double strength box. Be sure to check my other listings.

65 66 1965 1966 Mustang Shelby Rear Tail Light Panel C6ZZ NOS | eBay

-Fred-

This NOS C6ZZ 6540324 A 65/66 Mustang rear body tail lamp panel sold October 2, 2023 on Ebay for $485.00.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

!! Please take your time looking & read description fully !!

!! Very easy to install !!

You are bidding on a NOS service replacement dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS USA made service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper & the Motorcraft paper package. **Not the 3 Motorcraft boxes** This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

289 HiPo dual point distributor D1AZ-12A132-A breaker plate Kit 427 428 351 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by August 3, 2023 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with the same starting bid of $150.00 and the same Buy-It-Now of $195.00:

289 HiPo dual point distributor D1AZ-12A132-A breaker plate Kit 427 428 351 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by August 11, 2023 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with a much higher starting bid of $195.00 and a much higher Buy-It-Now of $253.50:

NOS/New 289 HiPo dual point breaker plate kit C9AZ-12151-B | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by September 13, 2023 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with a much lower starting bid of $150.00 and a much lower Buy-It-Now of $195.00:

NOS 289 HiPo dual point breaker plate kit C9AZ-12151-B | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with the same starting bid of $150.00 and the same Buy-It-Now of $195.00:

NOS 289 HiPo dual point breaker plate kit C9AZ-12151-B | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by October 2, 2023 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with the same starting bid of $175.00 and the same Buy-It-Now of $227.50:

NOS 289 HiPo dual point breaker plate kit C9AZ-12151-B | eBay

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Here is another Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

!! Please take your time looking & read description fully !!

!! Very easy to install !!

You are bidding on a NOS service replacement dual point mechanical or also know as a dual point centrifugal distributor breaker plate setup. #D1AZ-12A132-A supersede part #C0AF-12152-A. This item has been *obsolete from Ford for over 35 + years!!! ** Ford also used this conversion kit in the Boss 302 Trans Am dual point distributor. This full package comes complete as seen fully *assemble in the pictures. NOS Motorcraft two piece steel plate & NOS USA made service replacement HD dual points DP-5 & NOS Ford Motorcraft condenser DC-6 & New stainless steel hardware & New brass jump-bar dual point connector all installed. All looks *New. No corrosion on dual points or condenser. Also including Motorcraft installation paper & the Motorcraft paper package. **Not the 3 Motorcraft boxes** This is 100% correct for the 289 HiPo (K) code dual point distributor part number C5OF-12127-E or 427 HiPo (W) code dual point distributor part number C5AF-12127-E & 428 Shelby & 427 Cobra & Fairlane all centrifugal advance. Also will work *100% to change any of the Ford V8 distributor engines from a *Single point distributor to a *Dual point distributor: 260, 289, 302, 351 cid.Windsor & 351,400 & 429, 460 cid. Cleveland & All FE 352, 360, 390, 406, 427, 428 cid. too a centrifugal / mechanical *Dual point distributor. Fits all these V8 Ford original distributor aluminum housing: FoMoCo & Autolite & Motorcraft. Correct fit for the 1964 to 1973 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with the Ford V8 engines & Ford V8 distributors.

289 HiPo dual point distributor D1AZ-12A132-A breaker plate Kit 427 428 351 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by August 3, 2023 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with the same starting bid of $150.00 and the same Buy-It-Now of $195.00:

289 HiPo dual point distributor D1AZ-12A132-A breaker plate Kit 427 428 351 | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by August 11, 2023 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with a much higher starting bid of $195.00 and a much higher Buy-It-Now of $253.50:

NOS/New 289 HiPo dual point breaker plate kit C9AZ-12151-B | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by September 13, 2023 and therefore did NOT sell.

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with a much lower starting bid of $150.00 and a much lower Buy-It-Now of $195.00:

NOS 289 HiPo dual point breaker plate kit C9AZ-12151-B | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with the same starting bid of $150.00 and the same Buy-It-Now of $195.00:

NOS 289 HiPo dual point breaker plate kit C9AZ-12151-B | eBay

-Fred-

Display More

This NOS D1AZ 12A132 A dual point conversion kit received no bids by October 2, 2023 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

Quote from C6ZZKGT

This 66 Mustang GT fastback that appears to be Signal Flare Red with Red pony interior is for sale by Ebay seller "motorcityclassiccars" as a classified ad with a price of $119,000.00:

Vehicle Original VIN : 6F09K254832

This 1966 Mustang GT Fastback represents the definition of Mustang power, performance and design. The result of a frame-off restoration completed in 2021, this car is absolutely impeccable top to bottom. Powered by its matching-numbers HiPo 289ci/271hp V8 tied to a 4-speed manual transmission, this GT K-Code Fastback is an absolute rocket. With a 3.50 rear end and front disc brakes, this car is an absolute joy to drive. On the interior, the exterior's red is carried through with a totally restored interior. Bucket seats with console bearing the Pony interior level up the interior of a standard GT. Equipped with Rally Pac, Rally wheels and fog lamps, this Mustang checks all the boxes.

The 4th longest continuous production model in America, the Mustang was first produced in 1964 and created an all new class of cars - Pony Cars. Meant to provide affordable, compact and highly styled coupes and convertibles, Pony Cars were an immediate hit and the Mustang was the standout leader in terms of popularity.

Unless stated otherwise, mileage shown on odometer is exempt and unknown if original.

1966 Ford Mustang | eBay

-Fred-

Display More

This Kar has a lot of unknowns and cries out for a prepurchase inspection by a knowledge Hipo Mustang inspector.

-Fred-

Display More

This 66 Mustang GT fastback that appears to be Signal Flare Red with Red pony interior received no bids by September 2, 2023 and therefore did NOT sell.

-Fred-

Display More

This 66 Mustang GT fastback that appears to be Signal Flare Red with Red pony interior is back on Ebay again as a Classified ad with the same price of $119,000.00 or make offer:

1966 Ford Mustang | eBay

-Fred-

Display More

This 66 Mustang GT fastback that appears to be Signal Flare Red with Red pony interior received no bids by October 2, 2023 and therefore did NOT sell.

-Fred-

Display More

This 66 Mustang GT fastback that appears to be Signal Flare Red with Red pony interior is back on Ebay again as a Classified ad with the same price of $119,000.00 or make offer:

1966 Ford Mustang | eBay

-Fred-