Posts by C6ZZKGT

  • C3RA/C4RA/C4OZ 6394 A Wedge Cobra Bellhousing Scattershield

    This used C4RA/C4OZ Wedge Cobra scatter shield bellhousing is back on Ebay again with the same starting bid of $3,595.00:

    Shelby Cobra Scatter Shield Standard Shift Transmission Bellhousing | eBay

    -Fred-

  • Used 6 Bolt Hipo Engine

    Please note the Autolite rather than FoMoCo distributor and the clone carburetor.

    -Fred-

  • Used 6 Bolt Hipo Engine

    Here is an Ebay auction for a used 6 bolt Hipo engine by Ebay member "mustangmasters428" with a starting of $9,950.00:

    Here we have an excellent find a real 289 High performance motor assembly from our huge inventory of hard to find motor parts and more that we offer on eBay. Having 3 different K code cars we decided we are going to turn it loose verses building it for one of these cars which you will see this week on eBay and are also available at Mustang Masters

    We are offering this, an original 289 HiPo motor with a block dated 5E8 and casting number C5AE-6015-E! The HiPo 289 motor was available from 64 to 67 and came with many high-performance modifications to handle the increased horsepower of 271 HP, although Ford underrated the motor, and many agree it pumped out closer to 305 HP.

    We removed the pair of recently serviced 289 hipo heads dated 5D25 and 5D27 both of which have a great footprint showing lots of life not cut from multiple rebuilds. They have the raised spring seats and are stamped on the corners

    You will find to have a new set of pistons and a clean 30 over bore. We found no signs of cracks, welds, or repairs to the block. The clean cylinders with no ridge and forged pistons represent a past rebuild and since the owner passed I cannot verify how long ago it was. The crankshaft has a Ford tested brindle mark assuring its steel consistency.

    The cast iron 4 barrel intake is dated 5E13 and is offered with the 1 inch factory spacer with the non functional PCV nipple its solid. We have also included a service replacement factory C5 Dual point distributor and a replacement hipo 289 112 CFM 4 barrel carburetor which was added along with a set of the factory chrome valve covers for the owner adding a 289 Hipo to their K code car. We offer this as a used unit so no Guarantee will be offered it is sold as is

    The pistons and crankshaft move freely without excessive drag and upon inspection, this motor has the C3AE D HiPo rods which were machined to take 3/8ths studs instead of the regular 5/16ths, which is indicated by the 9/16ths nuts on the end of the rods (see photo).

    It also has the thick HiPo blancer and the much desired HiPo main caps! You will also find a set of weathered original exhaust manifolds all f which is period correct

    Do you have a regular 289 motor in that Mustang and are considering keeping the same cid size but want more horsepower and durability? This 289 HiPo block is just the ticket to turning that regular 289 Mustang to a hard charging street machine. Don't let this auction pass you by!

    1966 Mustang 289 High Performance Motor 289 HiPo Motor 289 K Code Motor Rebuilt | eBay

    -Fred-

  • Used Low Profile 8K Rally Pac

    Here is an Ebay auction for a used low profile 8K Rally Pac by Ebay member "mustangmasters428" with a starting bid of $695.00:

    Here we have a average used 8000 RPM Low Profile Rally Pac for a 1965-66 Mustang. This low profile version of the Rally Pac (combination tachometer and clock) was introduced to accommodate the five gauge instrumentation in the new '65 GT option groups. The electrical tachometer is ignition points powered measuring current flow and the clock also uses points with a 12 / 24 hour face.

    We chose to offer this Rally Pac in need of rebuild as it has been sitting countless years. That way we are sure we're selling you a unit that might need some attention or cleaning. We found the RPM gauge to be free moving a sign of functionality (see photos) although the clock which was functional could be unpredictable with the point design. The clock has been cleaned and reconditioned to bring this piece to driver car quality. The body and casing, as well as glass bezels are all in nice condition. We see no signs of case damage, cracks, or other quality issues.

    Also included is an bottom bracket and wiring. You will need a Rally Pac dash installation harness !This Rally-Pac would certainly be a nice addition to that 5 gauge instrument cluster, to give it that nice performance look.

    Should you have a show car we offer a complete restoration shop and can make this unit look and function just like new being only available as an option, these low profile Rally-Pacs are getting harder to come as they were an expensive addition which only the most performance oriented of new Mustang owners chose.

    Here is your chance to make a special addition to your dash to show you too are a performance minded Mustang owner!

    1965 66 Mustang Hipo 289 8000 Rally Pac Low Profile Original Real Deal Survivor | eBay

    -Fred-

  • Used FoMoCo Hipo Distributor

    This used FoMoCo Hipo distributor that had an "error in the listing" is back on Ebay again with a lower Buy-It-Now of $1,250.00:

    FORD MUSTANG SHELBY 289 HI-PO C5OF-12127-E DUAL POINT DISTRIBUTOR K CODE FoMoCo | eBay

    -Fred-

  • Used FoMoCo Hipo Distributor

    Quote from C6ZZKGT

    Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "Marty's Parts" with a Buy-It-Now of $1,350.00:

    Up for sale is a genuine Ford 289 hi-po distributor. Has correct FoMoCo logo with C5OF-12127-E and early 1965 4JC date code. No re-stamp.

    Distributor is used, not missing any parts and is ready for a re-build. What you see is what you get. No returns.

    FORD MUSTANG SHELBY 289 HI-PO C5OF-12127-E DUAL POINT DISTRIBUTOR K CODE FoMoCo | eBay

    -Fred-

    The auction for this used FoMoCo Hipo distributor was ended by the seller July 29, 2024 with the following explanation "This listing was ended by the seller because there was an error in the listing".

    -Fred-

  • Used FoMoCo Hipo Distributor

    This restored FoMoCo Hipo distributor is back on Ebay again with a new lower starting bid of $995.00 and a new lower Buy-It-Now of $1,293.50:

    289 HiPo dual point distributor K code C50F-12127-E Mustang, Falcon, Fairlane GT | eBay

    -Fred-

  • Used C5OE Heads

    Quote from C6ZZKGT

    Here is an Ebay auction for a pair of used C5OE heads by Ebay member "mustangmasters428" with a starting bid of $1,295.00:

    Here we have a mis matched pair of Ford 289 High-performance heads brought to us from one of our recent buyouts. The 289 Hipo motor was the best Ford had to offer in the earlier model Shelby Mustangs and Fairlaines. The Shelby GT 350 and all K model Mustangs as well as Hipo Fairlanes all used these 271 HP motors. A stronger better design these are a Cobra must. All the Hipo characteristics are present as seen in the photos. You can clearly see the recessed valve saddles and of course factory screw in studs in the one with a 19 on it a Feb 25th 1966. Of course, these heads can be purchased individually or as a pair and yes we buy if you have a single to sell let us know .

    The complete casting of the 289 hipo has a 19 on the corner and is dated 6B25 . The other heads while cast with the valve seats is bare and has a 20 on the outer corner. On the top corner there's a pronounced 4V on the 67 with a 7F1 on the C8OE on both the top and bottom sides. These heads are nice with clean castings which is uncommon in these high revving motors. There are no signs of cracks, welds or porting although they should be serviced before installed.

    $ 65 66 Shelby Mustang GT K Code 289 Hipo Heads C5OE | eBay

    -Fred-

    Make sure that you read the description carefully to realize that these are non matching C5OE and C8ZE heads.

    -Fred-

  • Used C5OE Heads

    Here is an Ebay auction for a pair of used C5OE heads by Ebay member "mustangmasters428" with a starting bid of $1,295.00:

    Here we have a mis matched pair of Ford 289 High-performance heads brought to us from one of our recent buyouts. The 289 Hipo motor was the best Ford had to offer in the earlier model Shelby Mustangs and Fairlaines. The Shelby GT 350 and all K model Mustangs as well as Hipo Fairlanes all used these 271 HP motors. A stronger better design these are a Cobra must. All the Hipo characteristics are present as seen in the photos. You can clearly see the recessed valve saddles and of course factory screw in studs in the one with a 19 on it a Feb 25th 1966. Of course, these heads can be purchased individually or as a pair and yes we buy if you have a single to sell let us know .

    The complete casting of the 289 hipo has a 19 on the corner and is dated 6B25 . The other heads while cast with the valve seats is bare and has a 20 on the outer corner. On the top corner there's a pronounced 4V on the 67 with a 7F1 on the C8OE on both the top and bottom sides. These heads are nice with clean castings which is uncommon in these high revving motors. There are no signs of cracks, welds or porting although they should be serviced before installed.

    $ 65 66 Shelby Mustang GT K Code 289 Hipo Heads C5OE | eBay

    -Fred-

  • Used C8ZE Replacement Harmonic Balancer

    Quote from C6ZZKGT

    Here is an Ebay auction for a used C8ZE replacement Hipo harmonic balancer by Ebay member "wildride2" with a Buy-It-Now of $139.99:

    This Ford 289 Hipo Harmonic Balancer is a great find for any vintage car enthusiast. Made in the United States, this high-quality part is perfect for those looking to restore their 1963-1968 Ford to its original state. With its universal fitment and performance part capabilities, this balancer is sure to provide the perfect balance for your engine. The manufacturer part number, C8ZE-A, is a great reference for those looking to identify the part they need. Don't miss out on this opportunity to add a piece of history to your collection.

    FORD 289 HIPO HARMONIC BALANCER C8ZE- A FORD HIPO REPLACEMENT PART 1963 - 1968 | eBay

    -Fred-

    This used C8ZE replacement Hipo harmonic balancer sold July 29, 2024 on Ebay for $139.99.

    -Fred-

  • 5F07K378630 on Ebay NIR

    This 65 Mustang Koupe Rangoon Red with white standard interior is back on Ebay again with the same Buy-It-Now of $12,500.00 or make offer:

    1965 Ford Mustang | eBay

    -Fred-

  • 6T09K171420 on Ebay

    This 66 Mustang GT fastback originally Candy Apple Red with black standard interior is back on Ebay again with the same Buy-It-Now of $19,950.00 or make offer:

    1966 Ford Mustang | eBay

    -Fred-

  • Used Reproduction Harmonic Balancer

    This used reproduction Hipo harmonic balancer received no bids by July 28, 2024 and therefore did NOT sell,

    -Fred-

  • C3RA/C4RA/C4OZ 6394 A Wedge Cobra Bellhousing Scattershield

    Thank you for your input on this, Dan.

    -Fred-

  • RUG-N 1967 Hipo Toploader on Ebay

    Here is a RUG-N 1967 Hipo toploader by Ebay seller "naylorauto" with a Buy-It-Now of $2,495:

    Available is a Toploader 4 speed Transmission for the '67 289HP (K-code) Mustang / Shelby GT350; Unit was disassembled w/ the intention of rebuilding, including the purchase of a Dan Williams Rebuild Kit, but not completed. In the interim, some misc. pieces have gone missing. In addition, the Tailshaft Extension Housing is not correct for this application, but could be used. The metal ID tag is impossible to picture, as the stamping is very faint. Free shipping to 48 states.

    1967 Mustang/Shelby GT350 289HP Toploader 4 speed Transmission RUG N1 | eBay

    -Fred-

  • C3RA/C4RA/C4OZ 6394 A Wedge Cobra Bellhousing Scattershield

    Here is an Ebay auction for a remanufactured C4RA/C4OZ Wedge Cobra 5 bolt scatter shield bellhousing by Ebay member "mep1170" with a starting bid of $2,795.00 and a Buy-It-Now of $3,633.50:

    Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289.

    Like new or better! As the people in the know are aware - machining of these was not great from the factory.

    This one was “blueprinted”making the block side & the transmission mounting surfaces perfectly true as they were designed to be, taking another “to do” out of your list.

    All threads - transmission mounting & starter are in excellent condition.

    Block plate is included.

    Never plentiful these are next to impossible to find - especially in this condition.

    Expensive - as rarity dictates. This one is for the person who will not compromise, demands & can afford the best!

    International buyers please contact me BEFORE bidding. Thank you.

    Shelby Cobra 5-Bolt Scattershield Bell Housing C4OZ-6394-A / C4RA-6395-A 260 289 | eBay

    -Fred-