Posts by C6ZZKGT

    Jim,

    The reason the the 302 rods are shorter is that 289 and 302 pistons are the same. Ford made up the stroke difference in the rods. The deck height theoretically will come out the same, barring any manufacturing and machining tolerance errors. Of course you will want to mock up any engine to check deck height if you are going for maximum performance.

    -Fred-

    Yes, it started off life as a 66 Hipo engine. It now has 12.5 to 1 compression with modified heads. It will not run on pump gas without severely retarding the timing. That of course would defeat the purpose of the compression for making horsepower. It has a C8ZE balancer and no flywheel. The lack of a flywheel will make it probable that the engine would need to be disassembled so that a flywheel could be balanced to match the rest of the assembly. I asked the man about the flywheel and he does not have it. He indicates that this is purely a race engine for the likes of a GT40 or GT350. It is also "old school" race technology so it is not really current. It is not an appropriate street engine for a Hipo Kar. It makes a great conversation piece with the period correct 2 X 4 intake manifold although Webers are more cool.

    -Fred-

    SPECIAL ED,

    The right hand side part number is C5ZZ 5255 C with a stamping number of C5ZA 5C227 A. The left hand side part number is C5ZZ 5255 D with a stamping number of C5ZA 5D200 A.

    -Fred-

    This fan is actually a repro Hipo fan which is obviously not worth anywhere near what was paid for this fan. The part number on the box is actually a D4ZZ 8600 A and not a C4ZZ number. It was remarked somewhere along the line to deceive someone as there never was a C4ZZ fan number. The proof of this is the YA 113 Motorcraft number which crosses over to the D4ZZ part number. The fan that was originally in the box was for a 74 to 78 Mustang with a 4 or 6 cylinder without A/C.

    -Fred-

    Brett,

    That is some real dedication that you have shown in reviving this car. It appears to be very nice work with a finished product that looks totally unlike the basket case that you started with. Being that it is a restomod, the change from coupe to fastback is not as critical. With all the panels that you replaced, this is about as close as one can get to a rebody without actually being one. Great job!!

    -Fred-

    When you receieve an email that appears to be a scam. Do not go to the link in the email as that is how they get your password. Forward these emails to [email protected] or [email protected] depending on which site they are supposedly sent from. You need not worry about receiving negative feedback on scam items. If you think that an Ebay auction is a scam you can report it by going to the bottom of that auction page and clicking on the "report this item" link and following it through. Ebay and Paypal do try to follow up on these things and most scam auctions that I have reported are usually gone in an hour or so.

    -Fred-

    Your Rally-Pac body is the low profile type which is correct for your car. The tach and clock mechanisms are not correct. The clock mechanism is out of a high profile type like in the pictures already posted to this post. The tach mechanism is an aftermarket piece as has already been stated earlier in this post.

    -Fred-

    Based on the VIN sequence, this car seems to have had a scheduled build date in May, 1965. The fog light switch on cars built before June 1, 1965 were supposed to have the switch mounted under the dash. I am basing this on the fact that cars with the switch mounted under the dash had a hexagonal retaining nut. The chrome bezel was not used until June 1, 1965 according to the Ford parts book. The chrome bezel was only used when the switch was moved up on the dash panel. Cars with the switch under the dash did not generally have the fog light wire hole punched out on the drivers side on the core support but only on the passenger side. The fog light wires on the drivers side were routed around the core support by the headlight. This would help clear up mystery of the lack of a hole on the drivers side.

    -Fred-