I found a package of Mr. Gasket #920 locking nuts that seem to match what I am using.
-Fred-
I found a package of Mr. Gasket #920 locking nuts that seem to match what I am using.
-Fred-
The current seller at least seems more Hipo educated than most.
-Fred-
The shape of the fan blades where they connect to the center appears to be correct and matches the originals that I have. It also has a balance weight that I have only seen on originals. The repros that I have in stock have a different shape for the blades. I will agree that $8,100 is more than tops even if the trans were correct. I have my doubts about the lower end without some pictures. The picture of the date code on the head is too close up to see if the cast in valve spring pockets are there. The only picture where I can make out the number on the upper end of the head looks to be an 18 which does not fall into the 19, 20 or 21 that is accepted for Hipo heads. It does not have a carburetor either.
-Fred-
Very nice work on this, Joe!
-Fred-
This is a lower price than it was offered for a few other times.
-Fred-
This setup did not meet reserve at $8,100.00. A friend of mine spoke with the seller while the auction was running and the Buy-It-Now would have been $12,500.00 if my friend had wanted it. It would seem to me that if the seller really wanted to sell it that pictures with the pan off would have been important.
-Fred-
I put them on over 20 years ago so I do not remember a brand name. I have bought other sets more recently and they all seem to be about the same. I can check and see if I still have some in their packaging when I return home tomorrow.
-Fred-
I use Posi Locks on mine with stock valve covers.
-Fred-
Congratulations Merlyn! You worked hard for this.
-Fred-
There are no pictures or description of possible rust issues. There is no district code listed in the door tag info. This Kar has a lot of potential as it very well may be a real GT Kar. It would be a lot better auction if it had more pictures.
-Fred-
Does this Kar have any of the interior pieces? Do you have the original door tag? Is this a standard or pony interior Kar?
-Fred-
Very good photo angle on this. It really shows the Kar off and the parking lights help as well.
-Fred-
Pretty cool information to be able to access!
-Fred-
A few suspect items on this deal are the standard type 65 motor mounts and the wide ratio trans. The picture of the head is good for a date code but a C5AE head looks the same in this spot. They may well be C5OE heads but you would need a different picture to tell for sure.
-Fred-
Dave,
That is a really nice job that you have done on your Kar.
-Fred-
I will give the seller credit for being reasonably honest in his descriptions. The average buyer would not notice that the rear end is not correct and he listed it as "period correct" which seems fine to me. He is not trying to misrepresent the Kar as numbers matching and trying to hide things like a lot of other sellers seem to do. It does look like a good solid Kar that would make a good platform to bring back to original specs.
-Fred-
POBOY427,
Your 715 Holley carb was built in October of 1965 in the third week. Holley used three digit date codes up to 1972 with the first digit being the year. The second digit is the month from 1 (January) through 10 (October) with the 10 shortened to a 0. Then A and B designate November and December. I have personally never seen the A or B months on a Holley carb as yet. The third digit of a 1 to 5 is the week of the month.
-Fred-
The seller states in the auction description that the seats and console are out of a 70 Mach 1. You are correct that it must be out of a 69 though as it has a provision for seat belts in the console and 70 does not.
-Fred-
The Buy-It-Now was lowered to $18,600. The seller declined an offer of $18,000 for it so it did not sell.
-Fred-
This one has been deleted by the author from Craigs List. Maybe it sold?
-Fred-