Dave,
Here are two links to the tri power cars that you probably are referring to.
http://www.hipomustang.com/hpmx/topic.asp…Terms=tri,power
http://www.hipomustang.com/hpmx/topic.asp…Terms=tri,power
-Fred-
Dave,
Here are two links to the tri power cars that you probably are referring to.
http://www.hipomustang.com/hpmx/topic.asp…Terms=tri,power
http://www.hipomustang.com/hpmx/topic.asp…Terms=tri,power
-Fred-
This car has been on Ebay several times and discussed here as well. At least the price is much lower than in previous selling attempts.
-Fred-
Another ad with minimal pictures and description. With the high performance 302 V8, this car also has a lot of questions. The price is pretty high for what is in the description.
-Fred-
This online ad does not have much in the way of a description or decent pictures. The engine has a Holley carb, repro air cleaner, gypo radiator, vacuum advance distributor, blue rather than black engine and 66 Shelby quarter windows. There are plenty of questions to be asked on this one.
-Fred-
Al,
Your 6H8 is the date and the "C" does not denote a 2V engine. That letter is thought to be an inspector code and they run throuhout the alphabet on these. The other letter stampings are sizing stamps for fitting pistons as far as I know.
-Fred-
This is definitely a 67 dated block. Even though the build date has been surfaced off of the upper left front tab, there still should be the same build date stamped onto the pan rail under the gasket on the passenger side near the rear. It is in approximately the same position as the casting date code.
-Fred-
Mike,
I am happy that you now have a Kar that you are happy with. It sounds like it was better than advertised. In looking at the posts regarding your Kar, the main item of contention was the price relative to the condition of the Kar in the first auction. I hope that you got it for a reasonable price and possibly share that price with us so that we can keep a pulse on values.
-Fred-
I will agree with Dave on the seller being reputable.
In regards to the Ebay "private" feedback, any Ebay person can have their feedback listed as "private". The problem is that it gives everyone else the impression that the "private" people are hiding something, which they probably are. Most of the time the "private" people are hiding negative feedback. From what I have seen this generally happens just prior to the person becoming "no longer a registered user" either by their own powers or by Ebay kicking them off.
-Fred-
I like the fact that a reproduction door tag is supposed to give credence to the automatic transmission as original equipment. The seller says that the automatic trans was available in April however this car was built in January so even if that were true the car does not fall into the sellers own time line. The disc brakes are not of the original type. The seller lists them as non powered so maybe the booster does not work?
The Hipo engine manual pictured is for a 66 and not a 65. Being as nothing in the engine compartment appears to be correct, I would question whether or not it has the correct rear end. I am about an hours drive away from this Kar if someone needs an inspection.
-Fred-
I would never have thought of that apparent quarter panel patch as a roofing shingle. Thanks for pointing that out. The carburetor does appear to be of the correct type and not a clone as so many are. I am unable to make out the tag though.
-Fred-
The seller has now posted additional pictures and information. The picture of the left side trunk drop off shows some sort of patch to the quarter panel in that area.
-Fred-
Being as the engine is blue, is it possible that it has already been rebuilt once before? The heater core must be bad as it is bypassed. It would have been better to have more different pictures rather than so many duplicates of the same pictures. If the Kar is truly as represented, it would make someone a desirable and reasonably rare Kar when completed. Unfortunately, the budget for this Kar needs to have very pockets even without any rust issues. However, I would certainly find this to be an easier restoration than a rusty Kar as I am sure that many of you here will agree.
-Fred-
The GT badge should be pretty much straight up above the "M" on the drivers side and straight up above the "G" on the passengers side. This Kar seems to be correct on this.
-Fred-
They usually do look better in pictures than in person.
-Fred-
I believe that the particular flywheel in question is one that just ended on Ebay and has a casting number of C6ZE 6380 A with a stamping of C7ZE-A. The date code is 2C22 which at the very earliest would have been March 22, 1972. It is definitely not an original flywheel however it does match as a Ford replacement Hipo flywheel in the Ford parts manuals.
-Fred-
If the D1AE-AA number is on the balancer itself and not the pulley, it will be for a 400 engine. Is it possible that you misread it and maybe it is a D1ZE rather than a D1AE?
-Fred-
That wagon seemed to have the tailgate features that GM ended up using in the early 70's on their full size wagons.
-Fred-
I would take four of the number ones for my two Kars.
-Fred
It is also important to remember to make sure that you have the heavy return spring for the clutch pedal on the brake pedal hanger bracket as it acts as a pressure relief once the pedal gets about 2/3 of the way to the floor. If you do not have the spring it makes the clutch pedal get even harder to push down as it approaches the floor.
-Fred-
Intake manifold is Ebay item number: 140174877297
-Fred-