I agree with the hardened exhaust seats and I have them in my Kars as I do drive them.
-Fred-
I agree with the hardened exhaust seats and I have them in my Kars as I do drive them.
-Fred-
The Kar has a high profile rather than the correct low profile Rally Pak. The color combination should bring some strong bids.
-Fred-
I have had six Hipo GT fastbacks and convertibles all at one time. I like the convertibles but the fastback is more useful as a driver. When I cut down on my fleet a few years ago, I kept a 66 Hipo GT fastback for a driver.
-Fred-
I still have a lot of older Pennzoil racing oil that I am still using.
-Fred-
I think that Don may be onto something here. I do not remember diesel motor oil being discussed on this forum before.
-Fred-
Two years ago, the gas to run through this carburetor was less than $2 a gallon. As much as we may think prices are high on things even now, we may look back on these days as "the good old days" two years from now.
-Fred-
As an addendum to my last post, the brackets I am referring to are the ones in the rear. As it turns out, Chuck was referring to the ones behind the rear seat which are to totally different in 67 compared to the 65-66 hangers.
-Fred-
The seller does quite a story on this Kar but unfortunately it is clearly no longer much of a "K" Kar anymore. Although it is not cut up it would still take a lot to bring it back to a somewhat original state. Even then it would still not have the correct original drivetrain. If these modifications had been done in the 70's it would have been considered normal. With the rack and pinion steering, wiring, dash cluster and engine mods done in the 21st century, it goes against logic for a "K" Kar.
-Fred-
I totally agree with Charles on this.
-Fred-
"T" series plates in California are really associated with late 66 and very early 67 production cars. In other words the "T" plate cars would have started with cars registered around the fall of 66.
-Fred-
That was a heck of a deal.
-Fred-
Chuck,
The left hand is the same. The right hand is not. I have both of them as NOS pieces if you need them. Please email or call me if you want them.
-Fred-
Steven,
I sent you a private message yesterday on your used Rally Pak as your email does not work.
-Fred-
This Kar has a repro data plate making the authenticity of the pony interior suspect. The Rally Pak is the wrong type. It has a repro air filter, Shelby intake and Holley carb. It is a very nice looking Kar though.
-Fred-
Ken meant to put 6J19 for a date code on his 2V engine.
-Fred-
The price is somewhat high for a coupe however it does appear to be fairly original. A closer look would be advised before making any commitments.
-Fred-
Congratulations on getting your dads car on the catalog. You did very well with your picture background.
-Fred-
Anything is possible with enough money involved. The changeover would have been somewhat expensive back in the day with new parts as all of the cluster parts were seperate pieces. There were no instrument cluster assemblies available form Ford. Then there is the wiring issue as all of the wiring under the dash and in the engine compartment was different between the two setups. Certainly a good mechanic could fabricate wiring modifications but that would be very uncommon to be done at a Ford dealership. In a similar line of thought though, I was parts manager at a Lincoln-Mercury dealer in the 80's when a customer bought a new car without A/C but had wanted A/C. Being as car had been delivered to the customer it would now become a used car if the dealer chose to unwind the deal. The dealer chose to have one of the mechanics take another new car with A/C and switch everything over between them. This involved dash assemblies and wiring as well as the A/C system. Again as I said, anything is possible with enough money involved.
-Fred-
I am not familiar with that particular Mallory distributor but I have found some of them to use Mopar and sometimes 55-61 Chevy dual point caps.
-Fred-
I have an NOS C5OE 4M17 head and the foot is .055 deep.
-Fred-