I have had several NOS Ford Hipo cams that were later production pieces with the same markings as yours. Your lobe profile looks correct as well. I may still have one like that as an NOS Ford part but it is fairly inaccesible at the moment.
-Fred-
I have had several NOS Ford Hipo cams that were later production pieces with the same markings as yours. Your lobe profile looks correct as well. I may still have one like that as an NOS Ford part but it is fairly inaccesible at the moment.
-Fred-
Dave Wallace is a member of this forum. Congratulations on your article, Dave.
-Fred-
I had a 66 Hipo GT convertible with black pony interior. It was originally Sauterne Gold and I repainted it the original color. It looked good when the paint is still new and shiny however I really did not like the color. I ended up selling the Kar because I was not in love with the color. Had I painted it a color that I liked, I probably would have kept it. A Kar can always be repainted back to its original color if a future owner wants to however it is your Kar and you need to keep yourself happy. It is not as if you are radiusing the rear wheel wells and tubbing it for huge tires.
-Fred-
I agree with Dave and Murf on this.
-Fred-
Welcome aboard Steve.
-Fred-
Before Jeffs' current post I would have thought that San Jose might have put the tape on as the cars were shipped without hoods. Maybe they were having problems because of that. However if Jeff found other San Jose cars like this then I guess my theory is flawed. If San Jose did this on all of their cars, how did Ford expect the caps to stay on once the customer started driving the cars? This cap was not a new design in 1965 however windshield washers were not standard until 1966 so Ford might have not had enough history of any problems. Maybe that is why Ford went to the hinged cap by 1966.
-Fred-
The reason that the car was pictured on the hoist is because the seller put it up for me to do an inspection on the Kar. The Kar no longer has the correct distributor that was in it a year ago. The seller is not that familiar with Mustangs as they are more of a European dealer. That is why the engine is now missing the chrome valve covers and is painted blue rather than black. I will not get into a lot of details here but do note the picture of the right quarter panel where it fails to meet up with the wheelhouse.
-Fred-
I at one time in the 70's met up with a 64 Vette that had a 426 stage 3 Ramcharger engine in it. The owner had me guess the type of engine from listening to the starter as Chrysler uses a double reduction starter that sounds totally different. I certainly did not expect a cross breed in a Corvette so I did not guess it correctly. I'll bet that you surprised a lot of people with your 289.
-Fred-
Great stuff, Charles!!
-Fred-
I will give the seller credit for disclosing the upgrades of the pony interior and GT package. It will although probably become an issue after another owner or two has had the Kar and tries to sell it as original.
-Fred-
An HEH-BT according to the Ford MPC is a wide ratio trans. Are you looking for a trans for a non-Hipo car?
-Fred-
That sounds like a great plan, Charles. Enquiring minds want to know and it is good that all of us can benefit from others' knowledge on this site. I try to share mine when I have anything useful.
-Fred-
There was a Ford add on dual exhaust kit for all 260 and 289 Mustang engines, C5ZZ 5210 A, that included mufflers and pipes. Other than the muffler part numbers, I have not as yet come up with the numbers for the other components as they may have only been available as a kit. The mufflers are round with dimensions of 4 inch diameter and 17 inches long. They are not the Arvinode type of muffler as I ordered them some years ago and found out the hard way. I had thought at the time that I was coming up with an Arvinode replacement. I actually do have a half dozen of them as they were thought at one time to be the correct ones for a 65 Shelby.
-Fred-
The Ebay auction description has the more honest details about the engine. It clearly states, in my eyes, that the original engine is not there. A partial copy of this is below:
This exceptionally rare factory code correct Acapulco Blue with Blue interior 1967 Ford Mustang GT K-code 2+2 Fastback features: 289cid 271hp HiPo spec engine, 4-speed manual transmission, power front disc brakes, GT equipment group, Sport Deck rear seats, AM radio, tinted glass, Deluxe seat belts, center console, original sales order, dealer invoice, warranty card, and more.
Purchased new in 1967 by a gentleman in Nebraska, this vehicle had one owner until 1971 when it was traded in to a dealer on a new 1971 Boss 351 Fastback. The original owner was later able to track the car down and repurchase it from a young man also in Nebraska in 1984. The motor had been replaced with a 302, however, the owner spent the next several years restoring the car as needed and sourcing parts to reinstall the correctly configured motor. By 1994 he had found the proper 289 block and had the engine and internals Magnafluxed, and balanced and blueprinted with correct HiPo internals and to HiPo specifications. This special and well cared for K-code gem was held in this enthusiast’s modest collection until 2007.
It is a shame that the web site for this Kar does not have this same description.
-Fred-
At least the current seller is honest about it having a Hipo spec but not original engine.
-Fred-
Yes, the A code GT cars had an "H" pipe unique to the A code GT only.
-Fred-
The block assembly date is usually also on the oil pan rail near the right rear. It will be under the gasket and not visible with the engine assembled.
-Fred-
I agree with a destroyed marking on the registry but not just a removal from the registry as Dave possibly suggests. That way it does not just disappear from history.
-Fred-
Ray,
I sent you a PM on these.
-Fred-