Thank you guys for all of the great pics. I will use them as a reference for the plater.
-Fred-
Thank you guys for all of the great pics. I will use them as a reference for the plater.
-Fred-
I added a Pertronix to get rid of the hassles with points closing up over a period of time. Now it even seems to start easier although I do not see why the Pertronix unit would help that. Everything else in the ignition system is Ford.
-Fred-
I inspected a 65 Hipo fastback in Kansas City area a couple of weeks ago that has a T5 trans in it. It is the first one that I have seen that was done the way I feel that it should be done. It had an adaptor plate from the trans to the stock 65 bellhousing. That made all of the clutch linkage work as original. I really like that far better than the cable conversions used with a bellhousing from a later car with a T5.
-Fred-
I could not have explained it as well as you did Sam.
-Fred-
Ebay charges a $40 insertion fees for passenger vehicles. They charge a $50 transaction service fee if the vehicle sells. They will not charge the transaction fee if there were no bids or the bids did not meet reserve. They will charge a relisting (insertion) fee if the vehicle did not sell the first time but will refund it if the vehicle sells the second time around. It appears to me that if the vehicle continues to not sell that you will be paying listing fees until it does.
-Fred-
I also wish to thank Tom for his engineering drawings.
-Fred-
Charles, I really appreciate your help on this. I knew that the color was not Hipo specific but there seems to be a lot of different golds out there.
-Fred-
Bo, I just sent you an email.
-Fred-
It looks like he should have taken the $20,100.02 that was bid the first time around if the bidder was serious.
-Fred-
The Ford parts book calls for the C5OE pulley but I have mostly seen the C5AE pulleys on 65 and 66 Hipos as they do not have a power steering belt issue. The pictures that I sent you Sam clearly show the differences.
-Fred-
Charles, if you have any part of any sort new or used that is the correct color, I would love to buy it for a sample for the plater.
-Fred-
The C5OE pulley goes straight back from the face of the pulley at the water pump hub to the pulley itself. The C5AE pulley has an outward taper to the pulley about 1/2 way back from the face at the hub. The C5OE pulley was designed to clear the P/S belt that ran from the crank pulley direct to the P/S pump. The C5AE pulley was an interference to the belt due to the taper. If you email me, I can send you a picture of them side by side for comparison as I have both of them in stock.
-Fred-
I just sent you an email on this.
-Fred-
Dave, I will buy one just to have it as I may need it some day.
-Fred-
The seller had lowered the reserve but apparently not enough. I guess that the prior local offers for $25,000 must have evaporated.
-Fred-
Fred
How did the crimp fair after reuse?
I will not know how the crimp comes out until after they are plated and reassembled Dave. I have both the 65 and 66 styles out for this process.
-Fred-
quote:
The rebuilder has the parts access. They put the plating of the bottom section in my lap. I could use some help from Charles regarding proper plating colors.
-Fred-
Fred it's just zinc dichromate, though locally it can be called other things ![]()
Thanks for the update on the plating Jeff. I have seen these as both a silver and gold color and my desire is to be totally correct. If it was gold, there are a number of shades of that as well.
-Fred-
Tony, A friend of mine says that he has one.
-Fred-
You are doing a great job Dave. Keep up the good work. I wish that my 66 Kars would be correct with your "Resonode" system as it will probably sound great.
-Fred-
Bill, you might try Valley Head Service in Northridge. They were good enough to do Shelbys heads back in the 60's. Larry Ofria is still in business there and I have run his shop before a number of years ago. His number is 818-993-7000.
-Fred-