Congratulations on your achievement David! It sounds like you really paid your dues on this one.
-Fred-
Congratulations on your achievement David! It sounds like you really paid your dues on this one.
-Fred-
Richard, Please communicate with SFRED on this Kar as he has my inspection report. Being as he paid for it, he should be the one to release any details. That way I am being fair to everyone.
-Fred-
If you want to have your mechanic call me, I can lead him through the best way to adjust them without any oil mess. At $100 per hour he should already know how to do this. It will take less than 20 minutes to adjust them if done my way.
-Fred-
It seems like an awful lot of these Kars end up with the wrong style Rally Pacs for their application.
-Fred-
If you are trying to have an original appearance, these rotors are one piece where your originals are two piece. The pad retainers on the calipers are the 67 style. They will work but are incorrect for 65 and 66 for appearance. They are offering the calipers in both 3/8" brake hose ports for 65 and 66 and 7/16" ports for 67. Some suppliers only offer the 67 size port requiring you to change brake hoses.
-Fred-
I just sent you an email and a PM.
-Fred-
If you post an EBAY link, we can all look at them.
-Fred-
Did you check the oil pressure with an external gauge? If you did check it with an external gauge, what pressures did you read? If your Kar is a GT or pony interior Kar the gauge in the Kar can vary quite a bit depending on the sender and CVR. It is not that big of a deal to replace worn main and rod bearings and oil pump if needed.
-Fred-
The price has now been lowered to $99,500 which is quite a change from the $125,000 price a couple of weeks ago. My inspection of this Kar may have helped change their thoughts on the price.
-Fred-
Chris, I have sent you a PM and an email on this Kar.
-Fred-
Merlyn, He is trying to access the transmission bolts and not the bellhousing bolts. The transmission bolts are too far rearward to access from the engine compartment. I have had success accessing the inner upper bolts with a really long 3/8 extension from the rear of the trans with a swivel socket on the bolts.
-Fred-
I am now able to open the Oswaltsmustang.com website but I cannot find this Kar. A link would be helpful.
-Fred-
Tim, I have sent you both an email and a PM.
-Fred-
There is a pending sale at $65,000 on this Kar.
-Fred-
I have been unable to open the http://www.oswaltsmustangs.com website to have another look at this Kar. Am I the only one having this problem?
-Fred-
The repro data plate will start calling the 76B body style into question.
-Fred-
The last available Ford generic replacement spring for the 65 and 66 Mustangs was a C7ZZ 5560 M. That is probably the part number that you see painted on the spring. It will work but is not really correct.
-Fred-
I seem to remember that at one time he was big into 55-57 Birds at least back in the 80's.
-Fred-
I thought this Kar looked familiar. This Kar has been discussed here previously.
http://www.hipomustang.com/hpmx/topic.asp…rms=5R07K240934
-Fred-
I am surprised that they do not mention the fact that this Kar has power steering added.
-Fred-