Posts by C6ZZKGT

    I am willing to stick my neck out on this and say that being as the 65 and 66 Shelbys were built without knowing their final destination, that the emission requirements had to at least meet California standards by having the closed system. If the final destination was California then everything worked out. If they had been built without the closed emissions, they would not have been able to be sold in California.

    -Fred-

    Jim, Please understand that I am not trying to stir anything up here. The example of the bare block engineering number that I used was universal to almost every Hipo Mustang on this forum with the exception of the 64 1/2 Kars. The same engineering number is used for both a Hipo and a standard 6 bolt block. There are other parts that have no engineering numbers like valves, push rods, rocker arms, trans gears, timing chains and sprockets to name a few. I agree with you that "it's not what's on the box, but what's in the box that counts". Over these many years I have encountered many misboxed parts. Sometimes they came from Ford this way however most of the time it happened with returns from the shop mechanics or customers. With a part number I can at least look it up in the Ford book and a lot of the time be able to check the description to verify what I actually have. An example would be a push rod that you found somewhere and wanted to see if it fit your Hipo 289. If you looked it up in the Ford parts book it will give you the dimensions. That is not always the case but it works well for this example. Sometimes the Ford parts book gives an engineering number with the part number however there are usually multiple engineering numbers for many parts and the book may list only one. It is my belief that having both an engineering number and a part number is most helpful in all of our research on this forum. I do not feel that there can be too much information as long as it is correct. I certainly do not wish to make anything more complex than it already is.

    -Fred-

    My bottom line is that a Kar exactly as you want it today may or may not even exist. Then you have to figure out if it is a decent Kar and for sale at a price that works for you. The probability of all this falling into place is very slim. Your next option is to get one as close as possible to your desires and change whatever it is that does not work for you. I am only advocating reversible changes though. Color is one of those reversible, although costly, changes. If you are not trying to show your Kar in MCA shows, the only person you need to please is yourself.

    -Fred-

    Jim, The reason that I use part numbers is that Ford part numbers are my second language. I was a Ford parts manager for twenty years and have been doing the Ford parts stuff for over 38 years now. I certainly know about Ford engineering numbers and have cross reference books for them. Most of what I deal with is NOS Ford parts so a Ford part number makes more sense to me. A Ford part number is also what anyone with a CD can look up to verify. I am old fashioned and still use the Ford parts books. I have more Ford parts books than most Ford dealers will ever have as I have mostly only the older versions. The older versions have part numbers that do not exist in the CD versions. Also keep in mind that some engineering numbers can be very misleading. A very good example that everyone on this forum knows is a C5AE 6015 E. There are two part numbers associated with this number but only one that matters to this forum.

    -Fred-

    The C4 Hipo flex plate is a C4OZ 6375 C in 1966 and C4OZ 6385 E in 1967. The C4OZ 6375 C was replaced by the C4OZ 6375 E so that all Mustang Hipo flex plates are the same. The standard 289 used a different flex plate due to the different Hipo balancing characteristics. The Hipo 4 speed flywheels were a different part number compared to a standard 289 for the same reason.

    -Fred-

    One of my 1966 Kars was Sauterne Gold and I painted it as original. It looked good as the color goes but I never fell in love with it and eventually sold it as I wanted a different color. It was a really nice rust free Hipo GT black pony interior convertible and in retrospect, I could have painted it a different color and I may have kept the Kar. The keeper Kars that I have now are 1966 Hipo GT black pony interor fastbacks. One is Silver Frost and the other is Signal Flare Red. Both colors are more than acceptable in my book.

    -Fred-

    Kevin, You should really look closer at the link to the original postings on this car. There is a lot of question regarding the fender VIN as it has been changed since the first auction and the seller claims that the front clip is original. I also made note at the time, and still stand by this, that there does not appear to be a choke cable hole in the firewall which only a Hipo car will have. I feel that an independent inspection should be made on this car before you finalize this deal.

    -Fred-

    Your Kar would originally have a 1310 size U-joint and not a 1330. The 1330 U-joints were used in big block and Boss cars but not 65/66 Hipo Kars. You might want to recheck your measurements. Of course it is always possible that someone upgraded your Kar to 1330 U-joints in the past. I know that I have made the upgrade before myself.

    -Fred-

    Most of the rear ends offered these days use later model pinion yokes which are not the same as your original. Make sure that you give the seller your application and dimensions from your original yoke so that a replacement rear end will fit without any driveshaft modifications.

    -Fred-

    Being as they are originally stamped from a large sheet of material, it took quite a few of them to figure out what was on the original sheet. It is like working with a puzzle and each piece has only part of the sheet. As far as I can tell, in no particular order, the following is what is printed in blue on these:

    Raybestos-Manhattan Inc. R/M STYLE No. F53

    There is no Ford logo either printed or embossed. They come as 10 to a box from Ford in a brown Ford box.

    -Fred-