Cool pictures!! What is the structure in the backgrond?
-Fred-
Cool pictures!! What is the structure in the backgrond?
-Fred-
I have run into problems with the secondaries not fully closing due to linkage binding.
-Fred-
I, for one, really appreciate all of your efforts on this book. I have made a number of people step up and order one from you.
-Fred-
I have one and if you email me, I can send you a picture. I would say that the bumper is more toward the center rather than off to one side. The bumper mounting stud is fine thread.
-Fred-
I have sent you both a PM and an email on your parts.
-Fred-
We did not mean to confuse anyone. Rohan and I were just poking some fun at the car here. Notice the smiley face in my post.
-Fred-
Maybe the plumbing is for a rear seat heater.![]()
-Fred-
The turnaround on these should be around one month to be on the safe side.
-Fred-
I wish to thank everyone who have already sent their fuel pumps to me for the rebuilding process. The rebuilder requires a minimum of 50 pumps to make it worth their time to setup and do these pumps. They are doing this as a special deal for my core supplier who helped set this up. I have no problem coming up with the 50 cores with the inclusion of those already sent to me. I do not wish to hold up this process any further for those who have already stepped up so if you wish to have your crimped together fuel pumps rebuilt, now is the time. I am setting a cutoff date of July 1,2008 for getting your cores to me. Due to the relatively low response, this will probably be the only rebuilding run.
-Fred-
Randy, the cam manufacturer should be the last word on valve adjustment specifications. I do not consider .012 to be all that tight if that is your thoughts. I had a 57 Chevy with a 270 horse 283 and the valve clearance on it was .008 intake and .012 exhaust. That was the factory 097 Duntov cam that was used from 57-61 in all high horse dual quad and fuel injected engines.
-Fred-
Welcome to the forum.
It appears that someone in the past has flared the fenders and quarter panels for larger tires. The fog lights are an unknown as they do not have the bar across them.
-Fred-
This Kar belongs to Tim Shanahan on this forum. A link to the posting is below.
http://www.hipomustang.com/hpmx/topic.asp?TOPIC_ID=8197
-Fred-
In response to Jim regarding Ebays new feedback policy, it seems that you actually have it reversed. The seller can no longer leave negative feedback for a buyer. If the buyer was unable to leave negative feedback for a seller, the negative feedback on this last sale could not have been left by oldcarnutty. Personally I would have preferred for Ebay to have left things the way they were with all types of feedback posted for both buyer and seller. At least that way you get a somewhat better picture of who you are dealing with.
-Fred-
All of his auctions have stated that the metal and panels are all factory and excellent. Then if you read very carefully further down in the description he states that it has a new full floor. This has also been stated in all of his auctions however it is really hard to notice as it is not in the same sentence with the factory metal statement. A few of us on this forum have overlooked the full floor statement as can be noted in our postings. Definitely an inaccurate statement on the sellers part regarding the factory metal.
-Fred-
Here is the negative feedback on Ebay from the previous buyer oldcarnutty who is 65 2plus2 on this forum.
Car not as described. See HIPO mustang exchange website under Pricing Info -Kars
-Fred-
The pictures in the auctions plus other pictures that I have speak volumes about this car. All of the points discussed on this forum are well documented in the pictures. We only call tham as we see them. A personal inspection was not necessary for our points of discussion.
-Fred-
The only advantage to the cast iron housing would be that you are less likely to strip any bolts. Make sure that you have the correct block plate.
-Fred-
Bill, do you already have a cast iron one?
-Fred-
I am happy that worked out well for you, Jim.
-Fred-