Posts by C6ZZKGT

    This is a long story so buckle up and bring a snack with you as you read this. Here is the latest update on the fuel pumps. I had given a July 1 cutoff date for people to send their pumps in especially to accomodate those that had already stepped up. That prompted a fair number of people to realize that the time had come for this to finally take place. I had a number of stragglers which finally was completed last week. I have studied the sample pumps that I already had done by the rebuilder and I came up with improvements to their methods. The rebuilder is more of a mass production place and some of their methods do not sit well with me for what I feel is necessary to keep these pumps in their proper cosmetic condition. For one the pivot pin for the lever was being removed by drilling a hole on the opposite side, driving it out and filling the hole when completed. I figured out how to get these pins out without drilling holes or any modifications. I have already removed all of the pins and levers. The second item that I did not like was that their cleaning method for the cast body is too harsh so I am going to do that part myself. The new order of getting things done is as follows. All pumps are cataloged by customer name, pump part number (3939-S etc.), date code and Carter or CARbureTER marking. They are also given a unique engraved number on the gasket surface and fuel inlet nipple to make sure that all parts are returned to their respective owners. All levers and pins are removed. The pumps then go to the rebuilder to have them disassembled. I then get them back to do the cleaning of the cast bodies and the plating of the tin parts. The rebuilder then gets them back to reassemble. The original deal that I made with the rebuilder was a promise of 50 units. So far including the ones of my own, I have come up with 37 pumps. I, of course, never worried about coming up with the remaining ones as my core supplier assured me that they could supply them. I knew that it was a four hour round trip to the core supplier so I was able to block out last Thursday to make the trip. This four hour trip ended up taking me all day. The core supplier is involved in the purchase, sales and trading of rebuildable automotive cores. This includes any type of pump, shaft, electrical motor, turbos, brain boxes, fuel injection, carburetors and any rebuildable aurtomotive item that you can imagine. Situated on 11 acres, with nearly 300,000 square feet of warehouse space, their inventory contains over 5 million cores from the Model T through current models, both foreign and domestic; from common to exotic. They have close to 100 employees and have so many fork lifts that they have their own maintainence shop on the premises just to keep them going. They have a couple of people that I saw that do nothing but walk around with a broom and dust pan sweeping up all day. This is probably one of the largest automotive core suppliers in the world. I went out there with the idea that I probably did not bring enough money to purchase all of the fuel pump cores that they had. A lot of their cores are in huge cardboard bins that are almost the size of a restaurant booth. You could live in one of these if it was empty. They brought these to me with a fork lift along with an empty one so that I could transfer all of the pumps from one bin to another in my search for the prize pumps. I literally moved a couple of thousand fuel pumps in my quest. It was over 90 degrees in the building and I probably lost five pounds in the process. I came up with a total of ZERO pumps that I could use. I called the rebuilder on Friday to give them the news but my contact was out at the time. They have not as yet returned my call but I have no doubt that they will still do the lesser amount of pumps that I now have as they did call me a couple of months ago just to see how things were going. My tentative plan is to take them what I have on Tuesday for disassembly.

    -Fred-

    Dave is correct that the service replacement cables from Ford have the foam. All of the ones that I have removed have had a very degraded, almost dripping and sometimes very flaky, foam on them. I know that 69/70 ones have a grommet. Charles would probably be the best to address this issue if there are any doubts.

    -Fred-

    Being as your car is already incorrect in some ways, adding A/C is only going to make your driving more enjoyable. It is after all your car to enjoy as you please. If you have a problem mounting a proper Ford A/C pulley on the harmonic balancer, just contact me and I will tell you how to fix the problem. Everything else in the Ford system will work fine without modification.

    -Fred-

    In Andrews case it appears that the Carson, Ca. shipping agent lost them and not before they arrived there. The shipping agent is a fairly large overseas frieght forwarder and regardless of the packaging of the parts they put them on a pallet for shipping from there. I personally hand carry everything to the shipping agent that I send to Andrew so that at least at that point I know that it is safe.

    -Fred-

    Duncan, if you are speaking of 351W heads, you have no choice but to use guide plates. Ford made guide plates specifically for that application and I have them in stock if you need them.

    -Fred-

    This seller also has a 64 1/2 convertible on Ebay. It is originally a 260 2V car with a production date of 30F and he states that it is a 76B body style which was not produced until at least 7 months after this car was built. My point is that I would question anything regarding the 66 Hipo GT fastback.

    -Fred-

    Push rod guide plates are not supposed to be used with slotted push rod heads. They are meant for heads with round holes for the pushrods where the hole is not the guide for the push rod. If you are using guide plates you need to make the push rod holes round so that there is no interference with the push rods.

    -Fred-

    Nathan, does this mean that you were able to perform a personal inspection on this car? If so, this is great information as I have followed this car for years and it was always suspect with me however, I never was able to see this car in person.

    -Fred-

    I put P/S on several of my Kars as I like it. I also did the Shelby mod on the upper control arms. I set the camber at 0 degrees and the toe at 1/8 inch. The caster is at 1 1/2 positive. I have put over 60,000 miles on the Kar with no adverse tire wear on radial tires.

    I did put P/S on a 65 fastback a number of years ago and left the manual steering box in it. It was a very squirrely car to drive because the steering had too much power with the manual ratio steering box. I replaced the steering box with the correct one and the problem went away. You might verify that your box is 4 turns lock to lock and not 5 turns.

    -Fred-